Hytrol Catalog

PROSORT 1421 & 1431 High Speed Sortation Conveyor The ProSort 1421 is designed to sort products at a 22 degree angle where higher speeds are required and close divert centers are not so critical. The ProSort 1431 is designed to sort products at a 30 degree angle where close divert centers are required. Products are transported on anodized aluminum slats where at a predetermined location, divert shoes move diagonally across the conveyor to push the product onto a take-away line. The ProSort 1400 family of sorters are designed for high speed applications where product diverting needs to be both positive and gentle. • 5Widths Available • Right or Left Hand Diverts Available • High Sort Rates • Anodized Aluminum Slats • Adjustable MHS-Type Floor Supports Available

Conveyor shown with optional floor supports

THISDRAWINGCONTAINSCONFID DESIGNSAND INFORMATIONWHIC THEPROPERTYOFHYTROLCONV COMPANY INC.THISDRAWINGAN INFORMATIONCONTAINEDHEREINM BEDISCLOSEDORDUPLICATED IN ORPART,UTILIZED INANYOTHERW USEDFORMANUFACTUREOFDE WITHOUTTHEPRIORWRITTENPER OFHYTROLCONVEYORCOMPAN

1 *Note: Spur location is measured beyond the end of the section on both the 22 degree and the 30 degree diverts. NEWDRAWING New RevisionNote N/A REVISIONHISTORY REV DATE TYPE

ENGINEER

SHAFT MOUNTED GEARMOTOR

HYTROL TIMING BELT SLAVE CONNECTION C

DWGNO

THISDRAWINGCONTAINSCONFIDENTIAL DESIGNSAND INFORMATIONWHICHARE THEPROPERTYOFHYTROLCONVEYOR COMPANY INC.THISDRAWINGANDTHE INFORMATIONCONTAINEDHEREINMAYNOT BEDISCLOSEDORDUPLICATED INWHOLE ORPART,UTILIZED INANYOTHERWORK,OR USEDFORMANUFACTUREOFDESIGNS WITHOUTTHEPRIORWRITTENPERMISSION OFHYTROLCONVEYORCOMPANY INC. FLOW

Example_PS1400_SGL_Sided_Shoe

JONESBORO,ARKANSAS CONVEYORCO., INC. HYTROL

DATE8/20/2019 ALUMINUM SLATS

DIVERT SHOE

MODELS

STANDARDTOLERANCES UNLESSOTHERWISESPECIFIED

MichaelNewman

DRAWNBY

N/A

1

NEWDRAWING New RevisionNote

FRACTIONS ±1/64 DECIMALS ±.005 ANGLES ±1°

Department

DATE

REV

DATE

TYPE

ENGINEER

REVISION HISTORY

REVISION 1

12 1 2

OAW

BR

INDUCTION BED WIDTH

CONVEYING SURFACE

27.5000

2 1 2

6 5 8 "

22° OR 30° (30° SHOWN)

INDUCTION CONVEYOR

8-1/4" DIA DRIVE PULLEY

HEAVY DUTY CHAIN COVER

3-1/4" DIA TAIL ROLLER

• FOR SPURS 4" WIDER THAN INDUCT, MINIMUM DISTANCE IS SAME AS DIVERT LENGTH. • FOR WIDER SPURS, MINIMUM IS EITHER SPUR LENGTH ALONG SORTER OR DIVERT LENGTH, WHICHEVER IS LONGER

"A-A"

NOTE: SPUR WIDTH IS AT LEAST 4" WIDER THAN INDUCTION CONVEYOR

INDUCTION LENGTH

SORTER LENGTH

36" OF TAIL IN SORTER 52" TAIL

FLOW

DIVERT SECTION LENGTH

DIVERT SECTION LENGTH INTERMEDIATE SECTION

60" DRIVE

2-1/4" DIA ROLLER

7 16

6 7 8

22

21 1 2

38"

18 1 2 TAKEUP

6" DIA TAKEUP PULLEY

SWITCH ASSEMBLY

OPTIONAL MHS SUPPORTS SHOWN

CATENARY

Spur Alignment

6-1/2" for Downstream ProSort 1421 1" for Downstream ProSort 1431

22° OR 30° (30° SHOWN)

2" to 2-1/2"

VIEW A-A (SOME DETAILS REMOVED FOR CLARITY)

CATALOG | 12202019