Hytrol Catalog

TS4200-150 The Transnorm TS4200/150 is a belt conveyor with an angled terminal at one end allowing product to feed onto or discharge from a main line at 30° or 45°.

Transnorm Junction Conveyor

• 3 Belt Widths • Adjustable TS Inc Type Floor Supports Available • Endless Belting F.O.B. Arlington, Texas

CLL

BF

30° Junction Conveyor

SG Height

TOB

CLL

For warranty/spare parts contact Transnorm System’s customer service. Please provide Transnorm’s serial number. Transnorm System Inc.

BF

2810 Avenue E East Arlington, TX 76011 Phone: 1-800-331-1749 X 249 Fax: (972) 606-0768

45° Junction Conveyor

SG Height

• STANDARD SPECIFICATIONS BELT - Gray, High Friction Novo 25, endless FRAME - 8”deep aluminum extrusion frame

TOB

PULLEYS- 1-1/16 in. dia. nosebar BEARINGS- Sealed, pre-lubricated, self-aligning, ball bearings on the drive pulley. Re-lube type. MOTOR- 2 HP Shaft Mounted Right Angle Gearmotor 208/230/460/575V-3Ph. 60 Hz (Specify Exact Voltage). BELT SPEED- Constant 600 FPM Max at Centerline of Conveying Surface. CAPACITY- Maximum load per linear foot (measured at centerline of conveying surface) 40 lbs. FLOOR SUPPORTS- Standard rectangular tubing style for up to 39”T.O.B. Other heights available (Contact Factory)

• OPTIONAL EQUIPMENT DRIVE LOCATION –On drive pulley for merging and on end roller for diverting. MOTORS –other HP’s available, 7.5 HP maximum (contact factory) CEILING HANGERS –Includes mounting brackets and cross pipes only. GUARD RAILS –3 in. to 24 in. tall available for all sizes. ELECTRICAL CONTROLS –AC variable frequency drives available CUSTOM COLORS –Available (contact factory). Paint chip must be provided.

CATALOG | 08312018