10072020_PriceList_1.1

BZE24EZ

24 Volt DC Horizontal Roller Belt Conveyor (Zero-Pressure Accumulating Type)

PRICES FOR COMPLETE CONVEYOR INCLUDE: • 1.9” Dia. x 16 Ga. Galvanized Roller (Rollers Set 1 3/4” Low on 3” Centers) in a 8 1/2” x 12 Ga. Channel Frame • 32-150 FPM, set on control card • 24 Volt DC motors mounted on the outside of frame • Belt over Roller • (1) Lagged Drive Roller per Zone • EZLogic® Retro-Reflective Zone Controller • IOP Power Supply for EZLogic®

• 40 AMP DC Power Supply, 24 Volt Fixed Output. Maximum of 12 Motors per Power Supply. Requires 120 or 230 single phase voltage, 9.12 AMP Input. Mounted Near Center of Conveyor • Less Floor Supports

Conveyor shown with optional floor supports. 24 TM e

U.S. Patent Numbers 5,862,907 • 7,243,781 • 7,591,366 Other Patents Pending.

IMPORTANT NOTES • NON STANDARD LENGTH ZONES Contact Factory.

• FLOOR SUPPORTS Floor Supports are not included in base price.There are two (2) stationary floor supports required for the first bed section and one (1) support per bed section thereafter. NOTE : Longer zones may require an additional floor support depending on product load.

• OTHER LENGTHS Use per foot price of width x OAL + zone price x total number of zones, plus base price. NOTE : OAL must be divisible by zone length. Zone length must be divisible by roller centers.

Between Rail Width

15" 14"

21" 20"

27" 26"

33"

Base Price

Belt Width 32" Overall FrameWidth 19 1/4" 25 1/4" 31 1/4" 37 1/4" Zone Price 1,142.00 1,242.00 1,341.00 1,440.00 Per Foot Price 120.00 143.00 162.00 190.00 NOTE : Bed Sections available in the following multiples: • 24”Zones–2’, 4’, 6’, 8’& 10’ • 30”Zones–2’1/2’’, 5’, 7 1/2’& 10’ • 36’’Zones-3’, 6’, 9’

40 amp

20 amp

1-12 Zones

1-6 Zones

2210.90

1705.70

OVERALL LENGTH

INFEED INTERMEDIATE SECTION LENGTH

DISCHARGE SECTION LENGTH

BELT

BELT TRACKING ASSEMBLY

E24 MOTOR

TREAD ROLLER

8 1/2

EZLOGIC ZONE CONTROLLER MOTOR CONTROL CARD

IOP UNIT

POWER SUPPLY

OPTIONAL "MS" SUPPORT SHOWN

D

DWGNO

THISDRAWINGCONTAINSCONFIDENTIAL DESIGNSAND INFORMATIONWHICHARE THEPROPERTYOFHYTROLCONVEYOR COMPANY INC.THISDRAWINGANDTHE INFORMATIONCONTAINEDHEREINMAYNOT BEDISCLOSEDORDUPLICATED INWHOLE ORPART,UTILIZED INANYOTHERWORK,OR USEDFORMANUFACTUREOFDESIGNS WITHOUTTHEPRIORWRITTENPERMISSION OFHYTROLCONVEYORCOMPANY INC.

HYTROL

654321

JONESBORO,ARKANSAS CONVEYORCO., INC. HYTROL

PRICELIST | 10072020

MODELS

STANDARDTOLERANCES UNLESSOTHERWISESPECIFIED

SustainingEng RogerHoney

DRAWNBY

DATE 5/13/2019

1

NEWDRAWING

FRACTIONS ±1/64 DECIMALS ±.005 ANGLES ±1°

Department

DATE

REV

DATE

New RevisionNote

TYPE

ENGINEER

REVISION HISTORY

REVISION 1