10072020_PriceList_1.1

DC-62

Drag Chain Conveyor

PRICES FOR COMPLETE CONVEYOR INCLUDE:

• (2) Strands of #60 single pitch chains. • UHMW polyethylene chain guides. • 6” x 7 ga. powder painted formed steel frame. • 1 1/2 HP 208/230/460/575/3/60 Gearmotor.

• 35 FPM constant speed. • 2060 BTB15H drive sprockets with 1 3/8 ” dia. shaft. • Less Electrical Controls • Less Supports

2-Strand Design

FRAMEWIDTH STRAND CENTERS BASE LENGTH 7'-0"

19 7/8"

22 7/8"

25 7/8"

28 7/8"

31 7/8"

34 7/8"

37 7/8"

40 7/8"

43 7/8"

46 7/8"

49 7/8"

18"

21"

24"

27"

30"

33"

36"

39"

42"

45"

48"

4779

4805

4831

4857

4884

4910

4936

4962

4988

5015

5041

Per Foot

124

127

131

134

138

141

145

148

152

155

159

• OPTIONAL EQUIPMENT • END DRIVE In lieu of Center Drive .............................................No Add-On ................................................................................No Deduct • FLOOR SUPPORTS Not Included in Base Price. Adjustable from 13”to 45”from floor to top of chain. Drive Support Model No. Adjustment to Top of Chain Price Each DCDS-02 13" to 15" 134.90 DCDS-03 15" to 17" 138.40 DCDS-04 17" to 19" 141.80 DCDS-05 19" to 21" 145.60 DCDS-06 21" to 23" 149.10 DCDS-07 23" to 25" 154.30 DCDS-08 25" to 27" 159.70 DCDS-09 27" to 29" 164.90 DCDS-10 29" to 31" 170.30 DCDS-11 31" to 33" 175.50 DCDS-12 33" to 35" 180.90 DCDS-13 35" to 37" 185.90 DCDS-14 37" to 39" 189.90 DCDS-15 39" to 41" 195.20 DCDS-16 41" to 43" 200.50 DCDS-17 43" to 45" 205.70

• ELECTRICAL CONTROLS- See Electrical Controls.

• PNEUMATICALLY OPERATED ROLLER TRANSFER (2 Strand Design Only) (Tail & Intermediate)

IMPORTANT NOTES

• OTHER LENGTHS For longer lengths add extra per foot to base price. No deduct for units shorter than 7’-0”. • OTHER WIDTHS For “IN-BETWEEN WIDTHS”, use next width plus 10%. For widths over 49 7/8”OAW, contact factory for lead time.

Includes supports for 13”elevation 3 1/2”rollers mounted on 6”centers

Strand Centers

Price Each

18" 21" 24" 27" 30" 33" 36" 39" 42" 45" 48"

9009.70 9229.80 9449.40 9667.60 9885.90 10105.00 10324.00 10543.10 10762.20 10982.10

• NON-STANDARD WIDTHS Contact factory for lead time.

• FLOOR SUPPORTS Floor supports are not included in base price. There are two (20)stationary floor supports required under the drive, and two (2) for the first bed section and one (1) support per bed section thereafter.

11202.10 Conveyor to Conveyor Design and Extended Design-Contact Factory

• CONTACT FACTORY

for larger Horsepower requirements.

• GALVANIZING- Contact Factory

Intermediate Support Adjustment to Top of Chain

Model No.

Price Each

DCS-01 DCS-02 DCS-03 DCS-04 DCS-05 DCS-06 DCS-07 DCS-08 DCS-09 DCS-10 DCS-11 DCS-12 DCS-13 DCS-14 DCS-15 DCS-16 DCS-17

12" to 13" 13" to 15" 15" to 17" 17" to 19" 19" to 21" 21" to 23" 23" to 25" 25" to 27" 27" to 29" 29" to 31" 31" to 33" 33" to 35" 35" to 37" 37" to 39" 39" to 41" 41" to 43" 43" to 45"

129.50 134.90 138.40 141.80 145.60 149.10 154.30 159.70 164.90 170.30 175.50 180.90 185.90 189.90 195.20 200.50 205.70

PRICELIST | 01022019

DC-63

Drag Chain Conveyor

PRICES FOR COMPLETE CONVEYOR INCLUDE:

• (3) Strands of #60 single pitch chains. • UHMW polyethylene chain guides. • 6” x 7 ga. powder painted formed steel frame. • 1 1/2 HP 208/230/460/575/3/60 Gearmotor.

• 35 FPM constant speed. • 2060 BTB15H drive sprockets with 1 3/8 ” dia. shaft. • Less Electrical controls • Less Supports

3-Strand Design

FRAMEWIDTH STRAND CENTERS BASE LENGTH 7'-0"

37 7/8"

43 7/8"

49 7/8"

55 7/8"

61 7/8"

67 7/8"

73 7/8"

79 7/8"

85 7/8"

91 7/8"

97 7/8 48" 6636

18"

21"

24"

27"

30"

33"

36"

39"

42"

45"

6091

6145

6200

6255

6309

6364

6418

6473

6527

6582

Per Foot

244

251

257

264

271

278

284

291

298

304

311

• OPTIONAL EQUIPMENT

ELECTRICAL CONTROLS- See Electrical Controls.

• END DRIVE In lieu of Center Drive .............................................No Add-On ................................................................................No Deduct • FLOOR SUPPORTS Not Included in Base Price. Adjustable from 13”to 37”from floor to top of chain. Drive Support Model No. Adjustment to Top of Chain Price Each DCDS-02 13" to 15" 134.90 DCDS-03 15" to 17" 138.40 DCDS-04 17" to 19" 141.80 DCDS-05 19" to 21" 145.60 DCDS-06 21" to 23" 149.10 DCDS-07 23" to 25" 154.30 DCDS-08 25" to 27" 159.70 DCDS-09 27" to 29" 164.90 DCDS-10 29" to 31" 170.30 DCDS-11 31" to 33" 175.50 DCDS-12 33" to 35" 180.90 DCDS-13 35" to 37" 185.90 DCDS-14 37”to 39” 189.90 DCDS-15 39”to 41” 195.20 DCDS-16 41”to 43” 200.50 DCDS-17 43”to 45” 205.70

IMPORTANT NOTES

• OTHER LENGTHS For longer lengths add extra per foot to base price. No deduct for units shorter than 7’-0”. • OTHER WIDTHS For “IN-BETWEEN WIDTHS”, use next width plus 10%. For widths over 97 7/8”OAW, contact factory for lead time.

• PNEUMATICALLY OPERATED ROLLER TRANSFER (3 STRAND DESIGN ONLY) (Tail & Intermediate)

Includes supports for 13”elevation 3 1/2”rollers mounted on 6”centers Strand Centers Price Each

18" 21" 24" 27" 30" 33" 36" 39" 42" 45" 48"

10648.30 11033.60 11417.40 11799.60 12197.70 12399.90 12947.70 13330.10 13713.60 14097.60

• NON-STANDARD WIDTHS Contact factory for lead time.

• FLOOR SUPPORTS Floor supports are not included in base price. There are two (20)stationary floor supports required under the drive, and two (2) for the first bed section and one (1) support per bed section thereafter.

14481.30 Conveyor to Conveyor Design and Extended Design.....Contact Factory

• CONTACT FACTORY

for larger Horsepower requirements.

• GALVANIZING- Contact Factory

Intermediate Support Adjustment to Top of Chain

Model No.

Price Each

DC3S-01 DC3S-02 DC3S-03 DC3S-04 DC3S-05 DC3S-06 DC3S-07 DC3S-08 DC3S-09 DC3S-10 DC3S-11 DC3S-12 DC3S-13 DC3S-14 DC3S-15 DC3S-16 DC3S-17

12" to 13" 13" to 15" 15" to 17" 17" to 19" 19" to 21" 21" to 23" 23" to 25" 25" to 27" 27" to 29" 29" to 31" 31" to 33" 33" to 35" 35" to 37" 37”to 39” 39”to 41” 41”to 43” 43”to 45”

193.60 199.50 207.80 212.90 218.40 223.50 231.70 239.20 247.30 255.50 262.60 271.50 279.30 287.10 295.30 303.20 311.10

PRICELIST | 01022019

DC-82

Drag Chain Conveyor

PRICES FOR COMPLETE CONVEYOR INCLUDE:

• (2) Strands of #80 single pitch chains. • UHMW polyethylene chain guides. • 6” x 4 ga. powder painted formed steel frame. • 2 HP 208/230/460/575/3/60 Gearmotor.

• 30 FPM constant speed. • 2080 BTB15H drive sprockets with 1 1/2 ” dia. shaft. • Less Electrical Controls • Less Supports

2-Strand Design

FRAMEWIDTH STRAND CENTERS BASE LENGTH 7'-0"

26 1/2"

29 1/2"

32 1/2"

35 1/2"

38 1/2"

41 1/2"

44 1/2"

47 1/2"

50 1/2"

53 1/2"

24"

27"

30"

33"

36"

39"

42"

45"

48"

51"

7117

7152

7188

7224

7260

7295

7331

7367

7403

7439

Per Foot

245

262

279

297

314

331

349

366

383

401

• OPTIONAL EQUIPMENT

• ELECTRICAL CONTROLS- See Electrical Controls.

• END DRIVE In lieu of Center Drive .............................................No Add-On ................................................................................No Deduct

IMPORTANT NOTES

• PNEUMATICALLY OPERATED ROLLER TRANSFER (2 STRAND DESIGN ONLY) (Tail & Intermediate)

• OTHER LENGTHS For longer lengths add extra per foot to base price. No deduct for units shorter than 7’-0”. • OTHER WIDTHS For “IN-BETWEEN WIDTHS”, use next width plus 10%. For widths over 53 1/2”OAW, contact factory for lead time.

• FLOOR SUPPORTS Not Included in Base Price. Adjustable from 15”to 45”from floor to top of chain. Drive Support Model No. Adjustment to Top of Chain Price Each DCDS-02 15" to 17" 134.90 DCDS-03 17" to 19" 138.40 DCDS-04 19" to 21" 141.80 DCDS-05 21" to 23" 145.60 DCDS-06 23" to 25" 149.10 DCDS-07 25" to 27" 154.30 DCDS-08 27" to 29" 159.70 DCDS-09 29" to 31" 164.90 DCDS-10 31" to 33" 170.30 DCDS-11 33" to 35" 175.50 DCDS-12 35" to 37" 180.90 DCDS-13 37" to 39" 185.90 DCDS-14 39" to 41" 189.90 DCDS-15 41" to 43" 195.20 DCDS-16 43" to 45" 200.50 DCDS-17 45" to 47" 205.70

Includes supports for 15”elevation 3 1/2”rollers mounted on 6”centers Strand Centers Price Each

24" 27" 30" 33" 36" 39" 42" 45" 48" 51”

9449.40 9667.60 9885.90 10105.00 10324.00 10543.10 10762.30 10982.10 11202.10

• NON-STANDARD WIDTHS Contact factory for lead time.

• FLOOR SUPPORTS Floor supports are not included in base price. There are two (20)stationary floor supports required under the drive, and two (2) for the first bed section and one (1) support per bed section thereafter.

11429.40 Conveyor to Conveyor Design and Extended Design.....Contact Factory

• CONTACT FACTORY

For larger Horsepower requirements.

• GALVANIZING- Contact Factory

Intermediate Support Adjustment to Top of Chain

Model No.

Price Each

DCS-02 DCS-03 DCS-04 DCS-05 DCS-06 DCS-07 DCS-08 DCS-09 DCS-10 DCS-11 DCS-12 DCS-13 DCS-14 DCS-15 DCS-16 DCS-17

14" to 15" 15" to 17" 17" to 19" 19" to 21" 21" to 23" 23" to 25" 25" to 27" 27" to 29" 29" to 31" 31" to 33" 33" to 35" 35" to 37" 37" to 39" 39" to 41" 41" to 43" 43" to 45"

134.90 138.40 141.80 145.60 149.10 154.30 159.70 164.90 170.30 175.50 180.90 185.90 189.90 195.20 200.50 205.70

PRICELIST | 01022019

DC-83

Drag Chain Conveyor

PRICES FOR COMPLETE CONVEYOR INCLUDE:

• (3) Strands of #80 single pitch chains. • UHMW polyethylene chain guides. • 6” x 4 ga. powder painted formed steel frame. • 2 HP 208/230/460/575/3/60 Gearmotor.

• 30 FPM constant speed. • 2080 BTB15H drive sprockets with 1 1/2 ” dia. shaft. • Less Electrical controls • Less Supports

3-Strand Design

FRAMEWIDTH STRAND CENTERS BASE LENGTH 7'-0"

50 1/2"

56 1/2"

62 1/2"

68 1/2"

74 1/2"

80 1/2"

86 1/2"

92 1/2"

98 1/2"

104 1/2"

24"

27"

30"

33"

36"

39"

42"

45"

48"

51"

8973

9026

9080

9133

9187

9240

9293

9347

9400

9453

Per Foot

366

381

396

411

426

441

456

471

486

501

• OPTIONAL EQUIPMENT

• ELECTRICAL CONTROLS- See Electrical Controls.

• END DRIVE In lieu of Center Drive ...........................................No Add-On ..............................................................................No Deduct

IMPORTANT NOTES

• PNEUMATICALLY OPERATED ROLLER TRANSFER (3 STRAND DESIGN ONLY) (Tail & Intermediate)

• OTHER LENGTHS For longer lengths add extra per foot to base price. No deduct for units shorter than 7’-0”. • OTHER WIDTHS For “IN-BETWEEN WIDTHS”, use next width plus 10%. For widths over 104 1/2” OAW, contact factory for lead time.

• FLOOR SUPPORTS Not Included in Base Price. Adjustable from 15”to 37”from floor to top of chain.

Includes supports for 15”elevation 3 1/2”rollers mounted on 6”centers Strand Centers Price Each

24" 27" 30" 33" 36" 39" 42" 45" 48" 51”

11417.40 11799.00 12197.70 12400.00 12947.70 13330.10 13713.60 14097.60 14481.30

Drive Support Adjustment to Top of Chain

Model No.

Price Each

• NON-STANDARD WIDTHS Contact factory for lead time.

DCDS-02 DCDS-03 DCDS-04 DCDS-05 DCDS-06 DCDS-07 DCDS-08 DCDS-09 DCDS-10 DCDS-11 DCDS-12 DCDS-13 DCDS-14 DCDS-15 DCDS-16 DCDS-17 DC3S-02 DC3S-03 DC3S-04 DC3S-05 DC3S-06 DC3S-07 DC3S-08 DC3S-09 DC3S-10 DC3S-11 DC3S-12 DC3S-13 DC3S-14 DC3S-15 DC3S-16 DC3S-17

15" to 17" 17" to 19" 19" to 21" 21" to 23" 23" to 25" 25" to 27" 27" to 29" 29" to 31" 31" to 33" 33" to 35" 35" to 37" 37" to 39" 39" to 41" 41" to 43" 43" to 45" 45" to 47" 14" to 15" 15" to 17" 17" to 19" 19" to 21" 21" to 23" 23" to 25" 25" to 27" 27" to 29" 29" to 31" 31" to 33" 33" to 35" 35" to 37" 37”to 39” 39”to 41” 41”to 43” 43”to 45”

134.90 138.40 141.80 145.60 149.10 154.30 159.70 164.90 170.30 175.50 180.90 185.90 189.90 195.20 200.50 205.70 199.50 207.80 212.90 218.40 223.50 231.70 239.20 247.30 255.50 262.60 271.50 279.30 287.10 295.30 303.20 311.10

• FLOOR SUPPORTS Floor supports are not included in base price. There are two (20)stationary floor supports required under the drive, and two (2) for the first bed section and one (1) support per bed section thereafter.

14865.20 Conveyor to Conveyor Design and Extended Design -Contact Factory

• CONTACT FACTORY

• GALVANIZING- Contact Factory

For larger Horsepower requirements.

Intermediate Support Adjustment to Top of Chain

Model No.

Price Each

PRICELIST | 01022019

DCEZ-62

Heavy Duty Accumulating Conveyor (Zero Pressure)

PRICES FOR COMPLETE CONVEYOR INCLUDE: • (2) Strands of #60 single pitch chains. • UHMW polyethylene chain guides. • 6”x 7 ga. powder painted formed steel frame. • Accumulation Zones with EZLogic® (Diffuse) Accumulation System NEMA 1, 2, IP 62. UL Approved. • 27 VDC 100Watt Power Supply for Zone Controllers (Requires 120VAC or 230 VAC Single Phase Input)

• 1 1/2 HP 208/230/460/575/3/60 Gearmotor. • 35 FPM constant speed. • 2060 BTB15H drive sprockets with 1 3/8”dia. shaft. • Filter Regulator • Less Motor Controls • Less Supports

U.S. Patent Numbers 5,862,907 • 7,243,781 • 7,591,366 Other Patents Pending.

NOTE : Pushbutton Programmer or Programming Kit for PC NOT INCLUDED in listed price. See EZLogic® Components pages for information and pricing.

2-Strand Design

FRAMEWIDTH 19 7/8"

22 7/8"

25 7/8"

28 7/8"

31 7/8"

34 7/8"

37 7/8"

40 7/8"

43 7/8"

46 7/8"

49 7/8"

STRAND CENTERS 48" BASE LENGTH 12'-0" 6451 6471 6490 6511 6531 6552 6572 6592 6613 6633 6653 Add for Each Accumulation Zone 2394.55 Per Foot 122 126 130 133 137 140 144 148 151 155 159 FOR ZONES 66”OR LONGER, USE 2655.80 AS PER ZONE PRICE. NOTE : Section lengths and OAL change with zone lengths. ZONE LENGTHS 36”to 60”in 6”INCREMENTS NOTE : Maximum product length is 6”less than zone length. Total specification of product is required; product is recommended for testing. 18" 21" 24" 27" 30" 33" 36" 39" 42" 45"

IMPORTANT NOTE

Operating DCEZ-62 in slug mode is not recommended.

Product footprint may affect drive capacity. NOTE : Drive Zone is minimum 60”long. • OPTIONAL EQUIPMENT

IMPORTANT NOTES

• HORSEPOWER For larger horsepower requirements, contact factory for lead time.

• OTHER LENGTHS For lengths longer than 12’-0”OAL, add per foot price of width for additional length + zone price x total number of zones required. OAL must be divisible by zone length. • OTHER WIDTHS For “IN-BETWEEN WIDTHS”, use next width plus 10%. For widths wider than 49 7/8”, contact factory for lead time. All non-standard widths contact factory for lead time.

• FLOOR SUPPORTS Floor supports are not included in base price. There are two (2) stationary floor supports required under the drive, and (2), for the first bed section and one (1) support per bed section thereafter.

• PNEUMATICALLY OPERATED ROLLER TRANSFER (2 STRAND DESIGN ONLY) (Tail & Intermediate)

• EZLOGIC® -See EZLogic® Component Page • ELECTRICAL CONTROLS -See Electrical Controls.

• END DRIVE In lieu of Center Drive .............................................No Add-On ................................................................................No Deduct • FLOOR SUPPORTS Not Included in Base Price. Adjustable from 13”to 45”from floor to top of chain. Drive Support Model No. Adjustment to Top of Chain Price Each DCDS-02 13" to 15" 134.90 DCDS-03 15" to 17" 138.40 DCDS-04 17" to 19" 141.80 DCDS-05 19" to 21" 145.60 DCDS-06 21" to 23" 149.10 DCDS-07 23" to 25" 154.30 DCDS-08 25" to 27" 159.70 DCDS-09 27" to 29" 164.90 DCDS-10 29" to 31" 170.30 DCDS-11 31" to 33" 175.50 DCDS-12 33" to 35" 180.90 DCDS-13 35" to 37" 185.90 DCDS-14 37" to 39" 189.90 DCDS-15 39" to 41" 195.20 DCDS-16 41" to 43" 200.50 DCDS-17 43" to 45" 205.70

Includes supports for 13”elevation 3 1/2”rollers mounted on 6”centers Strand Centers Price Each

Intermediate Support Adjustment to Top of Chain

Model No.

Price Each

DCS-01 DCS-02 DCS-03 DCS-04 DCS-05 DCS-06 DCS-07 DCS-08 DCS-09 DCS-10 DCS-11 DCS-12 DCS-13 DCS-14 DCS-15 DCS-16 DCS-17

12" to 13" 13" to 15" 15" to 17" 17" to 19" 19" to 21" 21" to 23" 23" to 25" 25" to 27" 27" to 29" 29" to 31" 31" to 33" 33" to 35" 35" to 37" 37" to 39" 39" to 41" 41" to 43" 43" to 45"

129.50 134.90 138.40 141.80 145.60 149.10 154.30 159.70 164.90 170.30 175.50 180.90 185.90 189.90 195.20 200.50 205.70

18" 21" 24" 27" 30" 33" 36" 39" 42" 45" 48"

9009.70 9229.80 9449.40 9667.60 9885.90 10105.00 10324.00 10543.10 10762.20 10982.10

11202.10 Conveyor to Conveyor Design and Extended Design.....Contact Application Team

• GALVANIZING- Contact Factory

PRICELIST | 01022019

DCEZ-63

Heavy Duty Accumulating Conveyor (Zero Pressure)

PRICES FOR COMPLETE CONVEYOR INCLUDE:

• (3) Strands of #60 single pitch chains. • UHMW polyethylene chain guides. • 6” x 7 ga. powder painted formed steel frame. • Accumulation Zones with EZLogic® (Diffuse) Accumulation System NEMA 1, 2, IP62. UL Approved. • 27 VDC 100 Watt Power Supply for Zone Controllers (Requires 120VAC or 230 VAC Single Phase Input)

• 1 1/2 HP 208/230/460/575/3/60 Gearmotor. • 35 FPM constant speed. • 2060 BTB15H drive sprockets with 1 3/8 ” dia. shaft. • Filter Regulator • Less Motor Controls • Less Supports

U.S. Patent Numbers 5,862,907 • 7,243,781 • 7,591,366 Other Patents Pending.

NOTE : Pushbutton Programmer or Programming Kit for PC NOT INCLUDED in listed price. See EZLogic® Components pages for information and pricing.

3-Strand Design

FRAMEWIDTH STRAND CENTERS BASE LENGTH 12'-0" Add for Each Accumulation Zone

37 7/8" 43 7/8" 49 7/8" 55 7/8" 61 7/8" 67 7/8" 73 7/8" 79 7/8" 85 7/8" 91 7/8" 97 7/8

18"

21"

24"

27"

30"

33"

36"

39"

42"

45"

48"

7869 7912 7955 7997 8040 8083 8124 8167 8210 8252 8295

2782.00

Per Foot

244

250

257

263

269

275

282

289

295

301

307

FOR ZONES 66”OR LONGER, USE 2994.60 AS PER ZONE PRICE. NOTE : Section lengths and OAL change with zone lengths. ZONE LENGTHS 36”to 60”in 6”INCREMENTS NOTE : Maximum product length is 6”less than zone length. Total specification of product is required; product is recommended for testing. Product footprint may affect drive capacity.

IMPORTANT NOTE

Operating DCEZ-63 in slug mode is not recommended.

• OPTIONAL EQUIPMENT IMPORTANT NOTES NOTE : Drive Zone is minimum 60”long.

• OTHER LENGTHS For lengths longer than 12’-0”OAL, add per foot price of width for additional length + zone price x total number of zones required. OAL must be divisible by zone length. • OTHER WIDTHS For “IN-BETWEEN WIDTHS”, use next width plus 10%. For widths wider than 97 7/8”, contact factory for lead time. All non-standard widths contact factory for lead time.

• HORSEPOWER For larger horsepower requirements, contact factory for lead time.

• FLOOR SUPPORTS Floor supports are not included in base price. There are two (2) stationary floor supports required under the drive, and (2),for the first bed section and one (1) support per bed section thereafter.

• EZLOGIC®- See EZLogic® Component Page

• PNEUMATICALLY OPERATED ROLLER TRANSFER (3 STRAND DESIGN ONLY) (Tail & Intermediate)

• END DRIVE In lieu of Center Drive .............................................No Add-On ................................................................................No Deduct • FLOOR SUPPORTS Not Included in Base Price. Adjustable from 13”to 37”from floor to top of chain.

• ELECTRICAL CONTROLS- See Electrical Controls.

Includes supports for 13”elevation 3 1/2”rollers mounted on 6”centers Strand Centers Price Each

Intermediate Support Adjustment to Top of Chain

Model No.

Price Each

DC3S-01 DC3S-02 DC3S-03 DC3S-04 DC3S-05 DC3S-06 DC3S-07 DC3S-08 DC3S-09 DC3S-10 DC3S-11 DC3S-12 DC3S-13 DC3S-14 DC3S-15 DC3S-16 DC3S-17

12" to 13" 13" to 15" 15" to 17" 17" to 19" 19" to 21" 21" to 23" 23" to 25" 25" to 27" 27" to 29" 29" to 31" 31" to 33" 33" to 35" 35" to 37" 37”to 39” 39”to 41” 41”to 43” 43”to 45”

193.60 199.50 207.80 212.90 218.40 223.50 231.70 239.20 247.30 255.50 262.60 271.50 279.30 287.10 295.30 303.20 311.10

18" 21" 24" 27" 30" 33" 36" 39" 42" 45" 48"

10648.30 11033.60 11417.40 11799.60 12197.70 12399.90 12947.70 13330.10 13713.60 14097.60

Drive Support Adjustment to Top of Chain

Model No.

Price Each

DCDS-02 DCDS-03 DCDS-04 DCDS-05 DCDS-06 DCDS-07 DCDS-08 DCDS-09 DCDS-10 DCDS-11 DCDS-12 DCDS-13 DCDS-14 DCDS-15 DCDS-16 DCDS-17

13" to 15" 15" to 17" 17" to 19" 19" to 21" 21" to 23" 23" to 25" 25" to 27" 27" to 29" 29" to 31" 31" to 33" 33" to 35" 35" to 37" 37”to 39” 39”to 41” 41”to 43” 43”to 45”

134.90 138.40 141.80 145.60 149.10 154.30 159.70 164.90 170.30 175.50 180.90 185.90 189.90 195.20 200.50 205.70

14481.30 Conveyor to Conveyor Design and Extended Design.....Contact Application Team

• GALVANIZING -Contact Factory

PRICELIST | 01022019

DCEZ-82

Heavy Duty Accumulating Conveyor (Zero Pressure)

PRICES FOR COMPLETE CONVEYOR INCLUDE:

• (2) Strands of #80 single pitch chains. • UHMW polyethylene chain guides. • 6” x 4 ga. powder painted formed steel frame. • Accumulation Zones with EZLogic® (Diffuse) Accumulation System NEMA 1, 2, IP 62. UL Approved. • 27 VDC 100 Watt Power Supply for Zone Controllers (Requires 120VAC or 230 VAC Single Phase Input)

• 2 HP 208/230/460/575/3/60 Gearmotor. • 30 FPM constant speed. • 2080 BTB15H drive sprockets with 1 1/2 ” dia. shaft. • Filter Regulator • Less Motor Controls • Less Supports

U.S. Patent Numbers 5,862,907 • 7,243,781 • 7,591,366 Other Patents Pending.

NOTE : Pushbutton Programmer or Programming Kit for PC NOT INCLUDED in listed price. See EZLogic® Components pages for information and pricing.

2-Strand Design

FRAMEWIDTH STRAND CENTERS BASE LENGTH 12'-0" Add for Each Accumulation Zone

26 1/2"

29 1/2"

32 1/2"

35 1/2"

38 1/2"

41 1/2"

44 1/2"

47 1/2"

50 1/2"

53 1/2"

24"

27"

30"

33"

36"

39"

42"

45"

48"

51"

10556

10597

10639

10681

10721

10764

10806

10846

10888

10930

2863

Per Foot

286

306

326

347

368

387

407

428

449

469

FOR ZONES 66”OR LONGER, USE 3621.80 AS PER ZONE PRICE. NOTE : Section lengths and OAL change with zone lengths. ZONE LENGTHS 36”to 60”in 6”INCREMENTS NOTE : Maximum product length is 6”less than zone length. Total specification of product is required; product is recommended for testing.

IMPORTANT NOTE

Operating DCEZ-82 in slug mode is not recommended.

Product footprint may affect drive capacity. NOTE : Drive Zone is minimum 60”long.

• OPTIONAL EQUIPMENT IMPORTANT NOTES

• OTHER LENGTHS For lengths longer than 12’-0”OAL, add per foot price of width for additional length + zone price x total number of zones required. OAL must be divisible by zone length. • OTHER WIDTHS For “IN-BETWEEN WIDTHS”, use next width plus 10%. For widths wider than 53 1/2”, contact factory for lead time. All non-standard widths contact factory for lead time.

• HORSEPOWER For larger horsepower requirements, contact factory for lead time.

• FLOOR SUPPORTS Floor supports are not included in base price. There are two (2) stationary floor supports required under the drive, and (2), for the first bed section and one (1) support per bed section thereafter.

• PNEUMATICALLY OPERATED ROLLER TRANSFER (2 STRAND DESIGN ONLY) (Tail & Intermediate)

• EZLOGIC® -See EZLogic® Component Page

• END DRIVE In lieu of Center Drive .............................................No Add-On ................................................................................No Deduct • FLOOR SUPPORTS Not Included in Base Price. Adjustable from 15”to 45”from floor to top of chain.

• ELECTRICAL CONTROLS- See Electrical Controls. Intermediate Support Model No. Adjustment to Top of Chain Price Each DCS-02 14" to 15" 130.70 DCS-03 15" to 17" 134.00 DCS-04 17" to 19" 137.70 DCS-05 19" to 21" 141.00 DCS-06 21" to 23" 144.50 DCS-07 23" to 25" 149.70 DCS-08 25" to 27" 154.90 DCS-09 27" to 29" 160.00 DCS-10 29" to 31" 165.20 DCS-11 31" to 33" 170.20 DCS-12 33" to 35" 175.30 DCS-13 35" to 37" 180.30 DCS-14 37" to 39" 184.10 DCS-15 39" to 41" 189.10 DCS-16 41" to 43" 194.40 DCS-17 43" to 45" 199.40

Includes supports for 15”elevation 3 1/2”rollers mounted on 6”centers

Strand Centers

Price Each

24" 27" 30" 33" 36" 39" 42" 45" 48" 51”

9449.40 9667.60 9885.90 10105.00 10324.00 10543.10 10762.30 10982.10 11202.10

Drive Support Adjustment to Top of Chain

Model No.

Price Each

DCDS-02 DCDS-03 DCDS-04 DCDS-05 DCDS-06 DCDS-07 DCDS-08 DCDS-09 DCDS-10 DCDS-11 DCDS-12 DCDS-13 DCDS-14 DCDS-15 DCDS-16 DCDS-17

15" to 17" 17" to 19" 19" to 21" 21" to 23" 23" to 25" 25" to 27" 27" to 29" 29" to 31" 31" to 33" 33" to 35" 35" to 37" 37" to 39" 39" to 41" 41" to 43" 43" to 45" 45" to 47"

134.90 138.40 141.80 145.60 149.10 154.30 159.70 164.90 170.30 175.50 180.90 185.90 189.90 195.20 200.50 205.70

11429.40 Conveyor to Conveyor Design and Extended Design.....Contact Application Team

• GALVANIZING- Contact Factory

PRICELIST | 06182019

DCEZ-83

Heavy Duty Accumulating Conveyor (Zero Pressure)

PRICES FOR COMPLETE CONVEYOR INCLUDE:

• (3) Strands of #80 single pitch chains. • UHMW polyethylene chain guides. • 6” x 4 ga. powder painted formed steel frame. • Accumulation Zones with EZLogic® (Diffuse) Accumulation System NEMA 1, 2, IP62. UL Approved. • 27 VDC 100 Watt Power Supply for Zone Controllers (Requires 120VAC or 230 VAC Single Phase Input)

• 2 HP 208/230/460/575/3/60 Gearmotor. • 30 FPM constant speed. • 2080 BTB15H drive sprockets with 1 1/2 ” dia. shaft. • Filter Regulator • Less Motor Controls • Less Supports

U.S. Patent Numbers 5,862,907 • 7,243,781 • 7,591,366 Other Patents Pending.

NOTE : Pushbutton Programmer or Programming Kit for PC NOT INCLUDED in listed price. See EZLogic® Components pages for information and pricing.

3-Strand Design FRAMEWIDTH 50 1/2" 56 1/2" 62 1/2" 68 1/2" 74 1/2" 80 1/2" 86 1/2" 92 1/2" 98 1/2" 104 1/2" STRAND CENTERS 24" 27" 30" 33" 36" 39" 42" 45" 48" 51" BASE LENGTH 12'-0" 12133 12277 12422 12566 12710 12855 13000 13144 13288 13433 Add for Each Accumulation Zone 3148 Per Foot 428 446 463 480 499 516 533 551 568 585 FOR ZONES 66”OR LONGER, USE 3906.80 AS PER ZONE PRICE. NOTE : Section lengths and OAL change with zone lengths. ZONE LENGTHS 36”to 60”in 6”INCREMENTS NOTE : Maximum product length is 6”less than zone length. Total specification of product is required; product is recommended for testing. Product footprint may affect drive capacity. NOTE : Drive Zone is minimum 60”long.

IMPORTANT NOTE

Operating DCEZ-83 in slug mode is not recommended.

• OPTIONAL EQUIPMENT IMPORTANT NOTES

• HORSEPOWER For larger horsepower requirements, contact factory for lead time.

• OTHER LENGTHS For lengths longer than 12’-0”OAL, add per foot price of width for additional length + zone price x total number of zones required. OAL must be divisible by zone length. • OTHER WIDTHS For “IN-BETWEEN WIDTHS”, use next width plus 10%. For widths wider than 104 1/2”, contact factory for lead time. All non-standard widths, contact factory for lead time.

• FLOOR SUPPORTS Floor supports are not included in base price. There are two (2) stationary floor supports required under the drive, and (2), for the first bed section and one (1) support per bed section thereafter.

• PNEUMATICALLY OPERATED ROLLER TRANSFER (3 STRAND DESIGN ONLY) (Tail & Intermediate)

• EZLOGIC®- See EZLogic® Component Page

• END DRIVE In lieu of Center Drive .............................................No Add-On ................................................................................No Deduct

• ELECTRICAL CONTROLS- See Electrical Controls.

Includes supports for 15”elevation 3 1/2”rollers mounted on 6”centers Strand Centers Price Each

Intermediate Support Adjustment to Top of Chain

• FLOOR SUPPORTS Not Included in Base Price. Adjustable from 15”to 37”from floor to top of chain. Drive Support Model No. Adjustment to Top of Chain Price Each DCDS-02 15" to 17" 134.90 DCDS-03 17" to 19" 138.40 DCDS-04 19" to 21" 141.80 DCDS-05 21" to 23" 145.60 DCDS-06 23" to 25" 149.10 DCDS-07 25" to 27" 154.30 DCDS-08 27" to 29" 159.70 DCDS-09 29" to 31" 164.90 DCDS-10 31" to 33" 170.30 DCDS-11 33" to 35" 175.50 DCDS-12 35" to 37" 180.90 DCDS-13 37" to 39" 185.90 DCDS-14 39" to 41" 189.90 DCDS-15 41" to 43" 195.20 DCDS-16 43" to 45" 200.50 DCDS-17 45" to 47" 205.70

Model No.

Price Each

DC3S-02 DC3S-03 DC3S-04 DC3S-05 DC3S-06 DC3S-07 DC3S-08 DC3S-09 DC3S-10 DC3S-11 DC3S-12 DC3S-13 DC3S-14 DC3S-15 DC3S-16 DC3S-17

14" to 15" 15" to 17" 17" to 19" 19" to 21" 21" to 23" 23" to 25" 25" to 27" 27" to 29" 29" to 31" 31" to 33" 33" to 35" 35" to 37" 37”to 39” 39”to 41” 41”to 43” 43”to 45”

199.50 207.80 212.90 218.40 223.50 231.70 239.20 247.30 255.50 262.60 271.50 279.30 287.10 295.30 303.20 311.10

24" 27" 30" 33" 36" 39" 42" 45" 48" 51”

11417.40 11799.00 12197.70 12400.00 12947.70 13330.10 13713.60 14097.60 14481.30

14865.20 Conveyor to Conveyor Design and Extended Design.....Contact Application Team

• GALVANIZING -Contact Factory

PRICELIST | 01022019

DCEZD-62

Heavy Duty Accumulating Conveyor (Zero Pressure)

PRICES FOR COMPLETE CONVEYOR INCLUDE: • (2) Strands of #60 single pitch chains. • Hardened #60 drive sprockets with 1 7/16” dia. shaft. • UHMW polyethylene chain guides. • 11 1/8” x 7 ga. powder painted formed steel frame. • Accumulation Zones with EZLogic® (Retro Reflective) Accumulation System NEMA 1, 2, IP 62. UL Approved.

• 27 VDC 100 Watt Power Supply for Zone Controllers (Requires 120 VAC or 230 VAC Single Phase Input) • 3/4 HP 208/230/460/575/3/60 Gearmotor. • 30 FPM constant speed. • Less Supports

U.S. Patent Numbers 5,862,907 • 7,243,781 • 7,591,366 Other Patents Pending.

NOTE : Pushbutton Programmer or Programming Kit for PC NOT INCLUDED in listed price. See EZLogic® Components pages for information and pricing.

2-Strand Design

FRAMEWIDTH 19 7/8"

22 7/8"

25 7/8"

28 7/8"

31 7/8"

34 7/8"

37 7/8"

40 7/8"

43 7/8"

46 7/8"

49 7/8"

STRAND CENTERS 48" BASE LENGTH 10'-0" 6204 6218 6231 6244 6257 6270 6283 6297 6310 6323 6336 Add for Each Accumulation Zone 2395 Per Foot 123 126 130 133 137 141 145 147 151 155 159 NOTE : Maximum product length is 6”less than zone length. Total specification of product is required; product is recommended for testing. Product footprint may affect drive capacity. 18" 21" 24" 27" 30" 33" 36" 39" 42" 45"

IMPORTANT NOTE

Add-on for Dual Drive Controller

Operating DCEZD-62 in slug mode is not recommended.

230 VOLT

460 VOLT

575 VOLT

1-4 Zones Single Output

5-8 Zones Dual Output

1-8 Zones Single Output

9-16 Zones Dual Output

1-8 Zones Single Output

9-16 Zones Dual Output

N/C

502.80

N/C

502.80

290.00

1081.60

NOTE : Base Price includes (2)zones with 230/3 Single Output Drive Controllers.

• OPTIONAL EQUIPMENT IMPORTANT NOTES

• HORSEPOWER For larger horsepower requirements, contact factory for lead time.

• OTHER LENGTHS For lengths longer than 10’-0”OAL, add per foot price of width for additional length + additional zone price. OAL must be divisible by zone length.

• FLOOR SUPPORTS Floor Supports are not included in base price.There are two (2) stationary floor supports required for the first bed section and one (1) support required per bed section thereafter.

• ZONE LENGTHS

66”, 60”, 54”, and 48”

• PNEUMATICALLY OPERATED ROLLER TRANSFER (2 STRAND DESIGN ONLY) (Tail & Intermediate)

• EZLOGIC® -See EZLogic® Component Page • ELECTRICAL CONTROLS -See Electrical Controls. Intermediate Support Model No. Adjustment to Top of Chain Price Each DCS-01 12" to 13" 129.50 DCS-02 13" to 15" 134.90 DCS-03 15" to 17" 138.40 DCS-04 17" to 19" 141.80 DCS-05 19" to 21" 145.60 DCS-06 21" to 23" 149.10 DCS-07 23" to 25" 154.30 DCS-08 25" to 27" 159.70 DCS-09 27" to 29" 164.90 DCS-10 29" to 31" 170.30 DCS-11 31" to 33" 175.50 DCS-12 33" to 35" 180.90 DCS-13 35" to 37" 185.90 DCS-14 37" to 39" 189.90 DCS-15 39" to 41" 195.20 DCS-16 41" to 43" 200.50 DCS-17 43" to 45" 205.70

Includes supports for 13”elevation 3 1/2”rollers mounted on 6”centers Strand Centers Price Each

18" 21" 24" 27" 30" 33" 36" 39" 42" 45" 48"

9009.70 9229.80 9449.40 9667.60 9885.90 10105.00 10324.00 10543.10 10762.20 10982.10

11202.10 Conveyor to Conveyor Design and Extended Design.....Contact Application Team

• GALVANIZING- Contact Factory

PRICELIST | 01022019

DCEZD-63

Heavy Duty Accumulating Conveyor (Zero Pressure)

PRICES FOR COMPLETE CONVEYOR INCLUDE: • (3) Strands of #60 single pitch chains. • Hardened #60 drive sprockets with 1 7/16 ” dia. shaft. • UHMW polyethylene chain guides. • 11 1/8 ” x 7 ga. powder painted formed steel frame. • Accumulation Zones with EZLogic® (Retro- Reflective) Accumulation System NEMA 1, 2, IP62. UL Approved.

• 27 VDC 100 Watt Power Supply for Zone Controllers (Requires 120 VAC or 230 VAC Single Phase Input) • 3/4 HP 208/230/460/575/3/60 Gearmotor. • 30 FPM constant speed. • Less Supports

U.S. Patent Numbers 5,862,907 • 7,243,781 • 7,591,366 Other Patents Pending.

NOTE : Pushbutton Programmer or Programming Kit for PC NOT INCLUDED in listed price. See EZLogic® Components pages for information and pricing.

3-Strand Design

FRAMEWIDTH STRAND CENTERS BASE LENGTH 10'-0" Add for Each Accumulation Zone

37 7/8" 43 7/8" 49 7/8" 55 7/8" 61 7/8" 67 7/8" 73 7/8" 79 7/8" 85 7/8" 91 7/8" 97 7/8

18"

21"

24"

27"

30"

33"

36"

39"

42"

45"

48"

7381 7412 7442 7471 7501 7531 7560 7590 7620 7649 7680

2782

Per Foot 307 NOTE : Maximum product length is 6”less than zone length. Total specification of product is required; product is recommended for testing. Product footprint may affect drive capacity. 244 250 256 263 269 276 282 289 295 302

IMPORTANT NOTE

Add-on for Dual Drive Controller

Operating DCEZD-63 in slug mode is not recommended.

230 VOLT

460 VOLT

575 VOLT

1-4 Zones Single Output

5-8 Zones Dual Output

1-8 Zones Single Output

9-16 Zones Dual Output

1-8 Zones Single Output

9-16 Zones Dual Output

N/C

502.80

N/C

502.80

290.00

1081.60

NOTE : Base Price includes (2)zones with 230/3 Single Output Drive Controllers.

• OPTIONAL EQUIPMENT IMPORTANT NOTES

• HORSEPOWER For larger horsepower requirements, contact factory for lead time.

• OTHER LENGTHS For lengths longer than 10’-0”OAL, add per foot price of width for additional length + additional zone price. OAL must be divisible by zone length.

• FLOOR SUPPORTS Floor Supports are not included in base price.There are two (2) stationary floor supports required for the first bed section and one (1) support required per bed section thereafter.

• ZONE LENGTHS

66”, 60”, 54”, and 48”

• PNEUMATICALLY OPERATED ROLLER TRANSFER (3 STRAND DESIGN ONLY) (Tail & Intermediate)

• EZLOGIC®- See EZLogic® Component Page

• ELECTRICAL CONTROLS- See Electrical Controls.

Includes supports for 13”elevation 3 1/2”rollers mounted on 6”centers Strand Centers Price Each

Intermediate Support Adjustment to Top of Chain

Model No.

Price Each

DC3S-01 DC3S-02 DC3S-03 DC3S-04 DC3S-05 DC3S-06 DC3S-07 DC3S-08 DC3S-09 DC3S-10 DC3S-11 DC3S-12 DC3S-13 DC3S-14 DC3S-15 DC3S-16 DC3S-17

12" to 13" 13" to 15" 15" to 17" 17" to 19" 19" to 21" 21" to 23" 23" to 25" 25" to 27" 27" to 29" 29" to 31" 31" to 33" 33" to 35" 35" to 37" 37”to 39” 39”to 41” 41”to 43” 43”to 45”

193.60 199.50 207.80 212.90 218.40 223.50 231.70 239.20 247.30 255.50 262.60 271.50 279.30 287.10 295.30 303.20 311.10

18" 21" 24" 27" 30" 33" 36" 39" 42" 45" 48"

10648.30 11033.60 11417.40 11799.60 12197.70 12399.90 12947.70 13330.10 13713.60 14097.60

14481.30 Conveyor to Conveyor Design and Extended Design.....Contact Application Team

• GALVANIZING -Contact Factory

PRICELIST | 01022019

DCEZD-82

Heavy Duty Accumulating Conveyor (Zero Pressure)

PRICES FOR COMPLETE CONVEYOR INCLUDE: • (2) Strands of #80 single pitch chains. • Hardened #80 drive sprockets with 1 11/16” dia. shaft. • UHMW polyethylene chain guides. • 12” x 4 ga. powder painted formed steel frame. • Accumulation Zones with EZLogic® (Retro Reflective) Accumulation System NEMA 1, 2, IP 62. UL Approved.

• 27 VDC 100 Watt Power Supply for Zone Controllers (Requires 120 VAC or 230 VAC Single Phase Input) • 1 HP 208/230/460/575/3/60 Gearmotor. • 30 FPM constant speed. • Less Supports

U.S. Patent Numbers 5,862,907 • 7,243,781 • 7,591,366 Other Patents Pending.

NOTE : Pushbutton Programmer or Programming Kit for PC NOT INCLUDED in listed price. See EZLogic® Components pages for information and pricing.

2-Strand Design

FRAMEWIDTH 26 1/2"

29 1/2”

32 1/2”

35 1/2”

38 1/2”

41 1/2”

44 1/2”

47 1/2”

50 1/2”

53 1/2”

STRAND CENTERS 51" BASE LENGTH 10'-0" 10557 10598 10640 10682 10722 10764 10806 10847 10889 10931 Add for Each Accumulation Zone 2863 Per Foot 286 306 327 347 368 388 408 428 448 468 NOTE : Maximum product length is 6”less than zone length. Total specification of product is required; product is recommended for testing. Product footprint may affect drive capacity. 24" 27" 30" 33" 36" 39" 42" 45" 48"

IMPORTANT NOTE

Add-on for Dual Drive Controller

Operating DCEZD-62 in slug mode is not recommended.

230 VOLT

460 VOLT

575 VOLT

1-3 Zones Single Output

4-6 Zones Dual Output

1-6 Zones Single Output

7-12 Zones Dual Output

1-6 Zones Single Output

7-12 Zones Dual Output

N/C

502.80

N/C

502.80

290.00

1081.60

NOTE : Base Price includes (2)zones with 230/3 Single Output Drive Controllers.

• OPTIONAL EQUIPMENT IMPORTANT NOTES

• HORSEPOWER For larger horsepower requirements, contact factory for lead time.

• OTHER LENGTHS For lengths longer than 10’-0”OAL, add per foot price of width for additional length + additional zone price. OAL must be divisible by zone length.

• FLOOR SUPPORTS Floor Supports are not included in base price.There are two (2) stationary floor supports required for the first bed section and one (1) support required per bed section thereafter.

• ZONE LENGTHS

66”, 60”, 54”, and 48”

• PNEUMATICALLY OPERATED ROLLER TRANSFER (2 STRAND DESIGN ONLY) (Tail & Intermediate)

• EZLOGIC® -See EZLogic® Component Page • ELECTRICAL CONTROLS -See Electrical Controls. Intermediate Support Model No. Adjustment to Top of Chain Price Each DC82S-01 12" to 13" 129.50 DC82S-02 13" to 15" 134.90 DC82S-03 15" to 17" 138.40 DC82S-04 17" to 19" 141.80 DC82S-05 19" to 21" 145.60 DC82S-06 21" to 23" 149.10 DC82S-07 23" to 25" 154.30 DC82S-08 25" to 27" 159.70 DC82S-09 27" to 29" 164.90 DC82S-10 29" to 31" 170.30 DC82S-11 31" to 33" 175.50 DC82S-12 33" to 35" 180.90 DC82S-13 35" to 37" 185.90 DC82S-14 37" to 39" 189.90 DC82S-15 39" to 41" 195.20 DC82S-16 41" to 43" 200.50 DC82S-17 43" to 45" 205.70

Includes supports for 13”elevation 3 1/2”rollers mounted on 6”centers Strand Centers Price Each

24" 27" 30" 33" 36" 39" 42" 45" 48" 51”

9449.40 9667.60 9885.90 10105.00 10324.00 10543.10 10762.20 10982.10 11202.10

11429.40 Conveyor to Conveyor Design and Extended Design.....Contact Application Team

• GALVANIZING- Contact Factory

PRICELIST | 02262020

DCEZD-83

Heavy Duty Accumulating Conveyor (Zero Pressure)

PRICES FOR COMPLETE CONVEYOR INCLUDE: • (3) Strands of #80 single pitch chains • Hardened #80 drive sprockets with 1 11/16” dia. shaft. • UHMW polyethylene chain guides. • 12” x 4 ga. powder painted formed steel frame. • Accumulation Zones with EZLogic® (Retro- Reflective) Accumulation System NEMA 1, 2, IP62. UL Approved.

• 27 VDC 100 Watt Power Supply for Zone Controllers (Requires 120 VAC or 230 VAC Single Phase Input) • 1 HP 208/230/460/575/3/60 Gearmotor. • 30 FPM constant speed. • Less Supports

U.S. Patent Numbers 5,862,907 • 7,243,781 • 7,591,366 Other Patents Pending.

NOTE : Pushbutton Programmer or Programming Kit for PC NOT INCLUDED in listed price. See EZLogic® Components pages for information and pricing.

3-Strand Design

FRAMEWIDTH STRAND CENTERS BASE LENGTH 10'-0" Add for Each Accumulation Zone

50 1/2" 56 1/2" 62 1/2" 68 1/2" 74 1/2" 80 1/2" 86 1/2" 92 1/2" 98 1/2" 104 1/2"

24"

27"

30"

33"

36"

39"

42"

45"

48"

51"

11276 11385 11495 11604 11714 11823 11933 12043 12152 12261

3148

Per Foot 586 NOTE : Maximum product length is 6”less than zone length. Total specification of product is required; product is recommended for testing. Product footprint may affect drive capacity. 428 446 464 481 498 516 533 551 568

IMPORTANT NOTE

Add-on for Dual Drive Controller

Operating DCEZD-63 in slug mode is not recommended.

230 VOLT

460 VOLT

575 VOLT

1-3 Zones Single Output

4-6 Zones Dual Output

1-6 Zones Single Output

7-12 Zones Dual Output

1-6 Zones Single Output

7-12 Zones Dual Output

N/C

502.80

N/C

502.80

290.00

1081.60

NOTE : Base Price includes (2)zones with 230/3 Single Output Drive Controllers.

• OPTIONAL EQUIPMENT IMPORTANT NOTES

• HORSEPOWER For larger horsepower requirements, contact factory for lead time.

• OTHER LENGTHS For lengths longer than 10’-0”OAL, add per foot price of width for additional length + additional zone price. OAL must be divisible by zone length.

• FLOOR SUPPORTS Floor Supports are not included in base price.There are two (2) stationary floor supports required for the first bed section and one (1) support required per bed section thereafter.

• ZONE LENGTHS

66”, 60”, 54”, and 48”

• PNEUMATICALLY OPERATED ROLLER TRANSFER (3 STRAND DESIGN ONLY) (Tail & Intermediate)

• EZLOGIC®- See EZLogic® Component Page

• ELECTRICAL CONTROLS- See Electrical Controls.

Includes supports for 13”elevation 3 1/2”rollers mounted on 6”centers Strand Centers Price Each

Intermediate Support Adjustment to Top of Chain

Model No. DC83S-01 DC83S-02 DC83S-03 DC83S-04 DC83S-05 DC83S-06 DC83S-07 DC83S-08 DC83S-09 DC83S-10 DC83S-11 DC83S-12 DC83S-13 DC83S-14 DC83S-15 DC83S-16 DC83S-17

Price Each

12" to 13" 13" to 15" 15" to 17" 17" to 19" 19" to 21" 21" to 23" 23" to 25" 25" to 27" 27" to 29" 29" to 31" 31" to 33" 33" to 35" 35" to 37" 37”to 39” 39”to 41” 41”to 43” 43”to 45”

193.60 199.50 207.80 212.90 218.40 223.50 231.70 239.20 247.30 255.50 262.60 271.50 279.30 287.10 295.30 303.20 311.10

24" 27" 30" 33" 36" 39" 42" 45" 48" 51”

11417.40 11799.60 12197.70 12399.90 12947.70 13330.10 13713.60 14097.60 14481.30

14865.20 Conveyor to Conveyor Design and Extended Design.....Contact Application Team

• GALVANIZING -Contact Factory

PRICELIST | 01022019

TA

Horizontal Belt Conveyor

PRICES FOR COMPLETE CONVEYOR INCLUDE: • End Drive, Located on Left-hand Side at Discharge End of Conveyor, Chain Guard on Left Hand Side When Standing at Infeed Looking Toward Discharge

Conveyor shown with optional floor supports and standard left-hand drive. Optional right-hand drive available for one-week shipment.

• ½ HP–“C” Face Totally Enclosed Motor (Specify Exact Voltage) • Totally Enclosed Chain Guard • 65 FPM Belt Speed • Less Electrical Controls • Less Floor Supports

• Black Ultimate 140 BBS Belt • 4” Deep x 12 Ga. Slider Bed • “C” Face Speed Reducer–Sealed Worm Gear

IMPORTANT NOTES

Overall Length with Center Drive

Black Ultimate 140 BBS Belt Widths

SIZE TO ORDER Overall Length "A"

Bed Length "L"

Drive Pulley

• OTHER LENGTHS

6"

8"

10"

12"

14"

16"

18"

20"

22”

24"

26”

30”

Other lengths not listed in price chart are available. For “IN-BETWEEN SIZES”, use next larger Overall Length“A”price.

Overall BedWidths

10"

12"

14"

16"

18"

20"

22"

24"

26”

28"

30”

34”

1944 1994 2044 2095 2145 2195 2245 2295 2345 2395 2445 2851 2099 2176 2253 2330 2406 2483 2560 2636 2713 2790 2867 3382 2255 2358 2461 2565 2668 2771 2875 2978 3081 3185 3288 3914 2410 2540 2670 2800 2930 3060 3189 3319 3449 3579 3709 4445 2565 2722 2878 3035 3191 3348 3504 3661 3817 3974 4130 4977 2720 2903 3087 3270 3453 3636 3819 4002 4185 4369 4552 5508 2875 3085 3295 3505 3715 3924 4134 4344 4554 4763 4973 6040 3031 3267 3503 3740 3976 4213 4449 4685 4922 5158 5394 6571 3186 3449 3712 3975 4238 4501 4764 5027 5290 5553 5816 7103 3341 3631 3920 4210 4499 4789 5079 5368 5658 5947 6237 7634 3903 4219 4535 4926 5242 5558 5928 6244 6561 6877 7193 8764 4058 4401 4743 5161 5504 5846 6243 6586 6929 7271 7614 9296 4213 4582 4952 5396 5765 6135 6558 6927 7297 7666 8036 9827 4368 4764 5160 5631 6027 6423 6873 7269 7665 8061 8457 10359 4523 4946 5369 5866 6289 6711 7188 7610 8033 8455 8878 10890 4679 5128 5577 6101 6550 6999 7502 7952 8401 8850 9299 11422 4834 5310 5786 6336 6812 7288 7817 8293 8769 9245 9721 11953 4989 5492 5994 6571 7073 7576 8132 8635 9137 9640 10142 12485 5144 5673 6202 6806 7335 7864 8447 8976 9505 10034 10563 13016 5300 5855 6411 7041 7597 8152 8762 9318 9873 10429 10985 13547 31.00 36.40 41.80 47.00 52.20 57.60 63.00 68.20 73.60 79.00 84.40 106.20

6'

5'

6'

11' 16' 21' 26' 31' 36' 41' 46' 51'

10' 15' 20' 25' 30' 35' 40' 45' 50' 55' 60' 65' 70' 75' 80' 85' 90' 95'

11' 16' 21' 26' 31' 36' 41' 46' 51' 56' 61' 66' 71' 76' 81' 86' 91' 96'

• OTHER WIDTHS

For “IN-BETWEEN WIDTHS”, use next width plus 10%. Contact factory for lead time.

4" dia.

• STANDARD WIDTHS

Available in 16”, 18”, 24”, and 28”OAW in 5 ft. and 10 ft. bed lengths only. - 3 days.

56'-11" 61'-11" 66'-11" 71'-11" 76'-11" 81'-11" 86'-11" 91'-11" 96'-11" 101'-11"

All standard widths to be offered in 1 INCH length increments beginning at 6’ OAL - 2 weeks from factory.

8" dia.

100'

101'

• INTERMEDIATE BEDS

Per Foot Price

Use per foot price of width x required length, supports not included. Available in 16”, 18”, 24”, and 28”OAW in 5 ft. and 10 ft. bed lengths only. - 3 days. FLOOR SUPPORTS ARE NOT INCLUDED IN BASE PRICE. There are two (2) stationary floor supports required for the first bed section and one (1) support required per bed section thereafter.

• OPTIONAL EQUIPMENT • OPTIONAL BELTS Extra Price Per Foot Conveyor Length“A”(in addition to Black Ultimate 140 BBS Belt regularly furnished). See chart below. BELT DESCRIPTION

PRICES PER FOOT OF CONVEYOR LENGTH "A"

Trackmate 120 Roughtop with PVC Cover (Black)

Polymate Roughtop Nitrile-COS (Brown)

Black Ultimate 140 BBS

Polymate 100 RMP-COS (White)

Pure Gum Rubber Roughtop

High Grip Longitudinally Grooved Belt

BELT WIDTH

• FLOOR SUPPORTS

Trackmate 533 COS-PVC (Black)

Tan Glidetop

6" 8"

-

16.80 22.20 27.50 32.80 38.10 43.30 48.60 54.00 59.20 64.60 69.90 75.20 80.30 86.00

4.20 5.30 6.30 7.40 8.70 9.80

2.20 3.40 4.40 5.20 6.20 7.10 7.90 9.00 9.80

11.40 15.00 19.40 22.90 26.70 30.20 33.80 37.70 41.20 44.90 48.80 52.50 56.40 67.90

0.70 0.80 1.00 1.10 1.30 1.50 1.70 1.80 2.00 2.20 2.50 2.70 3.00 3.40

22.00 29.30 36.50 43.90 51.40 58.40 65.90 73.40 80.40 88.00 94.80 102.40 110.00 116.60

2.20 3.40 4.40 5.20 6.20 7.10 7.90 9.00 9.80

3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00

10" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30” 32”

10.80 12.00 13.30 14.20 15.50 16.50 17.40 19.00

OTHER BELT WIDTHS —2”Wider on Same Bed. (AVAILABLE with Outrigged Center Drive or Outrigged Underside Take-Up) e.g., 12”Belt on 14”Bed.

10.80 11.60 12.20 13.70 16.70

10.80 11.60 12.20 13.70 16.70

•

MOTORS Extra Motor Price for OTHER THAN: 1/2 HP–208/230/460/575 V–3 Ph.–60 Hz.–Totally Enclosed. Speed affects horsepower requirements.

TOTALLY ENCLOSED

PREMIUM ENERGY EFFICIENT

BRAKE MOTORS

Holding Brake 208/230/ 460/575 V 3 Ph.- 60 Hz.

200 / 208 / 230 / 460 / 575 V 3 Ph. - 60 Hz.

Cycling Brake 208/230/460 3 Ph.- 60 Hz.

Cycling Brake 575 V 3 Ph.- 60 Hz.

Cycling Brake 208/230/460 3 Ph.- 60 Hz.

Cycling Brake 575 V 3 Ph.- 60 Hz.

Holding Brake 115/230 V 1 Ph.- 60 Hz.

115 / 230 V 1 Ph.- 60 Hz.

230/460 V 3 Ph.- 60 Hz.

575 V 3 Ph.- 60 Hz.

H.P. REQ

1/2

N/C N/A N/A

25.70 93.80

262.60 326.30 636.90

262.60 326.30 636.90

N/A

N/A

N/A

N/A

N/A

N/A

1 2

688.70 1074.20

1238.90* 1586.30*

1238.90* 1586.30*

2390.00** 2554.80**

2390.00** 2554.80**

798.80 2066.60

790.60

* NOTE : “Cycling Brakemotors”are used for indexing and are rated for 30 cycles per minute. Add-On Prices Include 5AC Reducer, Heavy Duty Motor Base Plate, and #50 Chain and Sprockets with Taper Bushed Hubs. ** NOTE : “Cycling Brakemotor”Add-On Prices Include 5AC Reducer, Heavy Duty Motor Base

Plate and Timing Belt Drive. NOTE : Holding Brake Motors are NOT rated for cycling. NOTE : “Cycling Brakemotors”require Heavy Duty End Drive or Center Drive.

PRICELIST | 06182019