10072020_PriceList_1.1

190-NSP

• OPTIONAL EQUIPMENT (CONTINUED)

• CONSTANT AND VARIABLE SPEEDS Constant–Within 30 to 120 FPM..............................No Charge Variable Speed........................See AC Variable Speed Drives • DRIVE COMPONENT DEDUCTS Less Motor Drive, Motor Mount, Sprockets and Guards, but with Drive Shaft ...................................................................... ........................................................Deduct.................504.80 Less Motor Only (1/2 HP-208/230/460/575 V-3 Ph.-60 Hz.)...................................................Deduct.................187.80 Less Reducer.....................................Deduct.................223.50 (Chain Guard and Sprockets Not Supplied) • O-RING DRIVE CHAIN Speeds up to 120 FPM (#50 Chain).......................................... ........................................................Add-On............... 186.30 Speeds up to 120 FPM (#60 Chain).......................................... ........................................................Add-On............... 266.00 • CROSSOVER Chain Speeds up to 120 FPM......................Add-On................546.20

• GUARD RAILS NOTE : Available in 5’and 10’lengths only . Contact factory for other lengths.

• FLOOR SUPPORTS Not Included in Base Price. Use Chart Below for Required Elevation. "MS" SUPPORT Model No. Adjustment to Top of Roller Price Each

Adjustable Universal Channel Guard Rail Both Sides................................. per foot.......................... 9.90 One Side.................................... per foot...........................5.00

*MSL-1 *MSL-2 *MSL-3 *MS-1 *MS-1.2 *MS-1.4 *MS-2 *MS-3

11 3/4" to 12 3/4" 12 3/4" to 14 1/2" 14 1/2" to 17 1/8" 16 3/4" to 18 1/2" 17 3/4" to 19 1/2" 18 3/4" to 20 1/2" 19 3/4" to 22 3/4" 22 3/8" to 25 3/8" 25 3/8" to 31 3/8" 29 3/8" to 35 3/8" 33 3/8" to 45 3/8" 43 3/8" to 55 3/8" 55 3/8" to 67 3/8" 67 3/8" to 79 3/8" 79 3/8" to 91 3/8" 89 3/8" to 101 3/8" 101 3/8" to 113 3/8"

38.30 38.30 38.30 38.30 38.30 38.30 39.50 43.50 50.10 52.30 57.70 85.20 97.30

Angle Type Types“A”or“B”available (specify). Prices are for both sides.

Type“A” 1 1/2”x 1 1/2”x 12 Ga.................... per foot...........................5.00 Type“B”(See NOTE ) 1 1/2”x 1 1/2”x 12 Ga.................... per foot...........................5.00

MS-4 MS-5 MS-6 MS-7 MS-8 MS-9

106.60 121.50 134.40

MS-10 MS-11 MS-12

Fixed Channel Type Prices are for both sides.

140.60 *Less than 24”top of roller elevation - Low Elevation Drive Required

3 1/2”x 1 1/2”x 12 Ga.................... per foot.........................14.90 6 1/2”x 1 1/2”x 12 Ga.................... per foot.........................17.70 10”x 1 1/2”x 12 Ga...................... per foot.........................25.00 13”x 1 1/2”x 12 Ga...................... per foot.........................30.20

#50 O-Ring Chain Speeds up to 120 FPM......................Add-On............... 761.10

NOTE : MS-7 to MS-12: Knee Braces included in price.

NOTE : If product comes in contact with guard rails, product flow will be affected.

• PACKAGE STOPS Angle End Stop

Extra Knee Braces ....... per pair.......................................19.00

• O-RING TRANSFER- See O-Ring Transfer

1 1/2”x 1 1/2”x 12 Ga. Steel 13”to 25”Between Rail Width........................................20.20 27”to 39”Between Rail Width........................................32.20

• CEILING HANGERS -See Ceiling Hangers

• TRAFFIC COP- See Conveyor Accessories.

• POLY-TIER SUPPORTS- See Poly-Tier Support Pricing.

• TURNING WHEEL- See Conveyor Accessories.

Raised Roller End Stop 2 1/8”Dia. Roller

• POSITIVE DRIVE ................................ Add on per foot..............................19.00 • OPTIONAL DRIVES Drive Type OVERALL FRAMEWIDTH 20" to 24" 26”to 42” Low Elevation* 177.30 221.60 16”to 24” 26”to 42” Side Mounted C-Face 177.30 221.60 Underside Drive Timing Belt 695.30 695.30 Side Mounted Timing Belt 872.80 917.00 * NOTE : 11 1/4”minimum elevation Requires Eurodrive Gearmotor (See Motor Chart)

• ELECTRICAL CONTROLS- See Electrical Controls.

13”to 25”Between Rail Width........................................51.50 27”to 39”Between Rail Width........................................63.60

• GALVANIZING- Contact Factory

Hand Operated Stop (Blade or Roller Types, specify)

13”to 23”Between Rail Width......................................342.60 25”to 39”Between Rail Width......................................376.60

Air Operated Linear Thruster Stop (Pin, Roller or Blade Types, specify) 13”to 39”Between Rail Width....................................1082.00 NOTE : Filter Regulator Unit not supplied as standard. Stops are supplied in NORMALLY DOWN position with SINGLE SOLENOID VALVE. Can be supplied in NORMALLY UP position. Can also be supplied with DOUBLE SOLENOID VALVE. Contact Factory.

PRICELIST | 07112019