10072020_PriceList_1.1

• OPTIONAL EQUIPMENT (CONTINUED)

138-LRC, 138-LRS, & 138-LRSS

• MOTORS Extra Motor Price for OTHER THAN: 1/2 HP–208/230/460/575 V–3 Ph.–60 Hz.–Totally Enclosed. SPEED AFFECTS HORSEPOWER REQUIREMENTS. TOTALLY ENCLOSED

• FLOOR SUPPORTS Not Included in Base Price. Use Chart Below for Required Elevation. "LS" SUPPORT Model No. Adjustment to Top of Roller

Price Each 38.30 38.30 38.30 38.30 38.30 38.30 39.50 43.50 50.10 52.30 57.70 85.20 97.30

PREMIUM ENERGY EFFICIENT

H.P. REQ.

200 / 208 V 3 Ph.- 60 Hz.

230/460/575 V 3 Ph.- 60 Hz.

115 / 230 V 1 Ph. - 60 Hz.

230/460/575 V 3 Ph.- 60 Hz.

LSL-1* LSL-2* LSL-3* LS-1* LS-1.2* LS-1.4* LS-2*

8 3/4" to 9 3/4" 9 3/4" to 11 1/2" 11 1/2" to 14 1/8" 14 1/16" to 15 13/16" 15 1/16" to 16 13/16" 16 1/16" to 17 13/16" 17 1/16" to 20 1/16" 19 11/16" to 22 11/16" 22 11/16" to 28 11/16" 26 11/16" to 32 11/16" 30 11/16" to 42 11/16" 40 11/16" to 52 11/16" 52 11/16" to 64 11/16" 64 11/16" to 76 11/16" 76 11/16" to 88 11/16" 86 11/16" to 98 11/16" 98 11/16" to 110 11/16"

1/2

N/C

N/C

25.70 93.80

262.60 326.30

1

42.60

326.30

• CONSTANT AND VARIABLE SPEEDS Constant–Within 25 to 120 FPM..............................No Charge Variable Speed............................See AC Variable Speed Drives NOTE : Speeds above 90 FPM NOT RECOMMENDED. • DRIVE COMPONENT DEDUCTS Less Motor Drive, Motor Mount and Guards, but with Drive Shaft........................ Deduct.........................................504.80 Less Motor Only (1/2 HP-208/230/460/575 V-3 Ph.-60 Hz.).......................... Deduct.........................................187.80 Less Reducer*.......... Deduct.........................................223.50 *Less V-Belt Guard, Chain Guard, sheaves and sprockets when V-Belt drive is supplied. Less chain guard and sprockets when C-Face drive is supplied. • SLAVE DRIVEN The “138-LRC”, “138-LRS”, & “138-LRSS” may be slave driven from straight“138-ACC”........................................................... ............................... Deduct.........................................356.60 LRC Slave Connection on Inside Radius. Includes Slave Kit. Please provide sketch. • SLAVE DRIVE FROM SLIDER BED (FROM TA ONLY) ............................... Deduct.........................................299.60 NOTE : Drive deduct includes slave connection. Belt 6” less than BedWidth. System ends required on slider bed.

• GUARD RAILS Adjustable Universal Channel Guard Rail...90°, 60°, 45°, & 30° Both Sides.................................................................... 147.00 Outside Only................................................................... 99.10 Inside Only..................................................................... 65.20

LS-3 LS-4 LS-5 LS-6 LS-7 LS-8 LS-9

Angle Type“A” 1”x 1”x 12 Ga. 90°, 60°, 45°, & 30°

106.60 121.50 134.40 140.60

LS-10 LS-11 LS-12

Both Sides...................................................................... 60.10 Outside Only................................................................... 37.20 Inside Only..................................................................... 22.10

*Less than 18 1/2”top of roller elevation

Side Mounted Drive Required.

Angle Type“B” 1”x 1”x 12 Ga. 90°, 60°, 45°, & 30°

NOTE : LS-7 to LS-12: Knee Braces included in price.

Extra Knee Braces ....... per pair.......................................19.00 Single Center Leg (LSC-6 and below) each..................... 39.50 Single Center Leg (LSC-7 and above) each..................... 49.20 • LOW ELEVATION Low Elevation Sheave Retainer Brackets and Low Elevation Take-Up to provide 111/16”elevation. (Side mounted drive required. See Optional Drives.) Add-on for LRC & LRS.................................................... 283.90 Add-on for LRSS............................................................ 218.30

Both Sides...................................................................... 89.80 Outside Only................................................................... 57.00 Inside Only..................................................................... 33.10

Fixed Channel Type 2 1/2”x 1”x 12 Ga. 90°, 60°, 45°, & 30°

Both Sides.................................................................... 134.80 Outside Only................................................................... 70.90 Inside Only..................................................................... 41.60

• CEILING HANGERS- See Ceiling Hangers

• TANGENTS (ADD-ON TO CURVE) *OAL Tangent

**138-LRC & 138-LRS

• PACKAGE STOPS Angle End Stop

• POLY-TIER SUPPORTS -See Poly-Tier Support Pricing.

9", 12", 15", 18", & 21" 24", 27", 30" 33", & 36" 39", 42", 45", & 48"

205.80 344.10

503.70 *“ OAL Tangent”includes a 6 1/4”long tangent on 90° and an 18” long tangent on a 30°,45°, & 60°. Tangent lengths increase in 3”increments only. For Tangents over 18”long on either or both ends, add one additional floor support per end. Combined Tangent lengths cannot exceed 54 1/4”. ** NOTE : 30°,45°, & 60° minimum 18 in. Long tangent on both ends. All curves, no more than 48 in. Long tangent on one end. For Tangents over 18”long on either or both ends, add one additional floor support per end. Combined Tangent lengths cannot exceed 54 1/4”.

1 1/2”x 1 1/2”x 12 Ga. Steel 10”to 22”Between Rail Width........................................20.20

• OPTIONAL DRIVES Drive Type

OVERALL FRAMEWIDTH 12" to 24"

Side Mounted*

243.00

*11 1/16”minimum elevation

SPUR FLOW (Specify) LRS

SPUR FLOW (Specify) LRSS

• TRAFFIC COP- See Conveyor Accessories.

• TURNING WHEEL- See Conveyor Accessories.

LEFT HAND

RIGHT HAND

RIGHT HAND

LEFT HAND

• ELECTRICAL CONTROLS- See Electrical Controls.

IMPORTANT NOTES

• GALVANIZING- Contact Factory

• WHEN ORDERING –Live Roller Spurs, please specify, Right or Left Hand unit. See illustration. • ATTACHMENT BRACKETS –Please specify conveyor to which spur is to be attached so proper attachment brackets are supplied. • LIMITATIONS –For Slave-Driving limitations, refer to HYTROL Conveyor Technical Manual. • APPLICATIONS –If a curve is driven from a straight“ACC”conveyor, sketch should be provided noting Right or Left Hand applications.

PRICELIST | 01022019