10072020_PriceList_1.1

190-LRC, 190-LRS, & 190-LRSS

• OPTIONAL EQUIPMENT (CONTINUED)

• GUARD RAILS Adjustable Universal Channel Guard Rail 90°, 60°, 45°, & 30°

• FLOOR SUPPORTS Not Included in Base Price. Use Chart Below for Required Elevation. "MS" SUPPORT Model No. Adjustment to Top of Roller Price Each

• MOTORS Extra Motor Price for OTHER THAN: 1/2 HP–208/230/460/575 V–3 Ph.–60 Hz.–Totally Enclosed. SPEED AFFECTS HORSEPOWER REQUIREMENTS.

Both Sides.....................................................................147.00 Outside Only....................................................................99.10 Inside Only......................................................................65.20

PREMIUM ENERGY EFFICIENT

TOTALLY ENCLOSED

MS-1* MS-1.2* MS-1.4* MS-2*

13 3/4" to 15 1/2" 14 3/4" to 16 1/2" 15 3/4" to 17 1/2" 16 3/4" to 19 3/4" 19 3/8" to 22 3/8" 22 3/8" to 28 3/8" 26 3/8" to 32 3/8" 30 3/8" to 42 3/8" 40 3/8" to 52 3/8" 52 3/8" to 64 3/8" 64 3/8" to 76 3/8" 76 3/8" to 88 3/8" 86 3/8" to 98 3/8" 98 3/8" to 110 3/8"

38.30 38.30 38.30 39.50 43.50 50.10 52.30 57.70 85.20 97.30

Angle Type“A” 1 1/2”x 1 1/2”x 12 Ga. 90°, 60°, 45°, & 30°

115 / 230 V 1 Ph. - 60 Hz.

H.P. REQ.

200 / 208 V 3 Ph.- 60 Hz.

230/460/575 V 3 Ph.- 60 Hz.

230/460/575 V 3 Ph.- 60 Hz.

MS-3 MS-4 MS-5 MS-6 MS-7 MS-8 MS-9

1/2 N/C

N/C N/A

25.70 93.80

262.60 326.30

Both Sides.......................................................................60.10 Outside Only....................................................................37.20 Inside Only......................................................................22.10

1

N/A

• CONSTANT AND VARIABLE SPEEDS Constant–Within 25 to 120 FPM..............................No Charge Variable Speed........................... See AC Variable Speed Drives • DRIVE COMPONENT DEDUCTS Less Motor Drive, Motor Mount and Guards, but with Drive Shaft........................ Deduct........................................ 504.80 Less Motor Only (1/2 HP-208/230/460/575 V-3 Ph.-60 Hz.).......................... Deduct.........................................187.80 Less Reducer*.......... Deduct.........................................223.50 *Less V-Belt Guard, Chain Guard, sheaves and sprockets when V-Belt drive is supplied. Less chain guard and sprockets when C-Face drive is supplied. • SLAVE DRIVEN The 190-LRC, 190-LRS, & 190-LRSS may be slave driven from straight 190-ACC, 190-ACZ, ABLR, 190-LR, or ABEZ ..............................................Deduct...................356.60 LRC Slave Connection on Inside Radius. Includes slave kit. Please provide sketch. • SLAVE DRIVE FROM SLIDER BED ............................... Deduct.........................................299.60 NOTE : Drive deduct includes slave connection. Belt 6” less than BedWidth. System ends required on slider bed. • TANGENTS (ADD-ON TO CURVE) Special Length Tangents for 190-LRC & 190-LRS curves up to 4’ long. with 3”roller centers OAL Tangent* 190-LRC & 190-LRS 9", 12", 15", 18", & 21" 287.20 24", 27", 30" 33", & 36" 574.80 39", 42", 45", & 48" 766.20 * “OAL Tangent”includes a 6 1/4”long tangent on 90° and an 18” long tangent on a 30°,45°, & 60°. Tangent lengths increase in 3”increments only. NOTE : 30°,45°, & 60° minimum 18 in. Long tangent on both ends. All curves, no more than 48 in. Long tangent on one end. For Tangents over 18”long on either or both ends, add one additional floor support per end. Combined Tangent lengths cannot exceed 54 1/4”. 180° Curve has maximum 6 1/4” long tangent each end with no middle tangent. Contact factory for additional tangent combinations.

Angle Type“B” 1 1/2”x 1 1/2”x 12 Ga. 90°, 60°,45°, & 30°

106.60 121.50 134.40 140.60

MS-10 MS-11 MS-12

Both Sides...................................................................... 89.80 Outside Only................................................................... 57.00 Inside Only..................................................................... 33.10

**Less than 18 1/2”top of roller elevation – Shaft Mounted Drive or Side Mounted Drive required. NOTE : MS-7 to MS-12: Knee Braces included in price. Extra Knee Braces ....... per pair.......................................19.00 Single Center Leg (MSC-6 and below) each................... 39.50 Single Center Leg (MSC-7 and above) each.................... 49.20 • LOW ELEVATION Low Elevation Sheave Retainer and Low Elevation Take-Up to provide 11 1/8”elevation for 190-LRC and 190-LRS. (Side Mounted Drive required – See Optional Drives.) Low Elevation Sheave Retainer to provide 8 3/4”elevation for 190-LRSS. (Shaft Mounted Drive required – See Optional Drives.) Low Elevation Sheave Retainer to provide 11 1/8”elevation for 190-LRSS. (Side Mounted Drive required – See Optional Drives.) Add-on for LRC & LRS................per bracket...................283.70 Add-on for LRSS........................per bracket...................218.30

Fixed Channel Type - 90°, 60°, 45°, & 30° 3 1/2”x 1 1/2”x 12 Ga.

Both Sides................................................................ 143.50 Outside Only............................................................... 90.70 Inside Only................................................................. 53.60 6 1/2”x 1 1/2”x 12 Ga. Both Sides.................................................................266.10 Outside Only..............................................................168.00 Inside Only..................................................................99.60 10”x 1 1/2”x 12 Ga. (1 ea. 3 ”and 6 ”stacked) Both Sides.................................................................409.70 Outside Only..............................................................259.50 Inside Only................................................................153.10 13”x 1 1/2”x 12 Ga. ( 2 - 6 ”stacked) Both Sides.................................................................532.40 Outside Only..............................................................336.00 Inside Only................................................................199.00 NOTE : For 180° curve, use the above prices x2. NOTE : If product comes in contact with guard rails, product flow will be affected.

• CEILING HANGERS- See Ceiling Hangers

• POLY-TIER SUPPORTS- See Poly-Tier Support Pricing.

• OPTIONAL DRIVES Unified Drives: (Shaft Mounted) Unified Drives:

16”to 28” 30”to 42”

• TRAFFIC COP -See Conveyor Accessories.

Shaft Mounted Drive 267.40 267.40 Speed FPM 43 52 64 86 103 129 172 257 343 Max HP 1 1 2 2 2 2 2 2 2 * Reducer size increases with 2 HP. **Contact Factory.

• TURNING WHEEL -See Conveyor Accessories.

• ELECTRICAL CONTROLS -See Electrical Controls.

OVERALL FRAMEWIDTH 16" to 24"

• GALVANIZING- Contact Factory

Drive Type

26" to 42"

Side Mounted

243.00

315.80

SPUR FLOW (Specify) LRS

IMPORTANT NOTES

LEFT HAND

• LIMITATIONS For Slave-Driving limitations, refer to the HYTROL General Catalog. • APPLICATIONS If a curve is driven from a straight“ACC”,“ACZ”, or“LR” conveyor, sketch should be provided noting Right or Left Hand applications.

RIGHT HAND

• WHEN ORDERING Live Roller Spurs, please specify, Right or Left Hand unit. See illustration. • ATTACHMENT BRACKETS Pleasespecifyconveyortowhichspuristobeattached so proper attachment brackets are supplied.

SPUR FLOW (Specify) LRSS

RIGHT HAND

LEFT HAND

PRICELIST | 01022019