10072020_PriceList_1.1

190-ACZ

• OPTIONAL EQUIPMENT (CONTINUED)

• CONSTANT AND VARIABLE SPEEDS Constant C-Face–Within 17-135 FPM......................No Charge Variable Speed............................See AC Variable Speed Drives • DRIVE COMPONENT DEDUCTS Less Motor Drive, Motor Mount and Guards, but with Shaft ExtensionDeduct.................................................504.80 Less Motor Only (1/2 HP-208/230/460/575 V-3 Ph.-60 Hz.).......................... Deduct.........................................187.80 Less Reducer*.......... Deduct.........................................223.50 *Less V-Belt Guard, Chain Guard, sheaves and sprockets when V-Belt drive is supplied. Less chain guard and sprockets when C-Face drive is supplied. • SLAVE CONNECTION KIT For Slave Driving existing curves...................................148.20 (Please Provide Sketch)

• GUARD RAILS NOTE : Available in 5’and 10’lengths only. Contact factory for other lengths. Adjustable Universal Channel Guard Rail Both Sides................ per foot........................................... 9.90 One Side................... per foot........................................... 5.00 Angle Type“A” 1 1/2”x 1 1/2”12 Ga..................................................................... ................................ both sides per foot...........................5.60 Angle Type“B”Integral 1 1/2”x 1 1/2”x 12 Ga with Pop-Out Roller Feature...................... both sides per foot............................................................7.10 NOTE : Available with 3”and 4”roller centers only.

• FLOOR SUPPORTS Not Included in Base Price. Use Chart Below for Required Elevation. "MS" SUPPORT Model No. Adjustment to Top of Roller Price Each

MS-1* MS-1.2* MS-1.4* MS-2*

13 3/4" to 15 1/2" 14 3/4" to 16 1/2" 15 3/4" to 17 1/2" 16 3/4" to 19 3/4" 19 3/8" to 22 3/8" 22 3/8" to 28 3/8" 26 3/8" to 32 3/8" 30 3/8" to 42 3/8" 40 3/8" to 52 3/8" 52 3/8" to 64 3/8" 64 3/8" to 76 3/8" 76 3/8" to 88 3/8" 86 3/8" to 98 3/8" 98 3/8" to 110 3/8"

38.30 38.30 38.30 39.50 43.50 50.10 52.30 57.70 85.20 97.30

MS-3 MS-4 MS-5 MS-6 MS-7 MS-8 MS-9

106.60 121.50 134.40 140.60

MS-10 MS-11 MS-12

Fixed Channel Type - Non-Overlapping (Reversing) (Prices are for both sides.)

• PACKAGE STOPS Angle End Stop

* Less than 17 1/2”top of roller elevation–

3 1/2”x 1 1/2”x 12 Ga..............................per foot................14.80 6 1/2”x 1 1/2”x 12 Ga..............................per foot................17.70 10”x 1 1/2”x 12 Ga................................per foot................25.00 13”x 1 1/2”x 12 Ga................................per foot................30.20

Low Elevation Side Mounted Center Drive Required (16”Minimum Elevation). NOTE : MS-7 to MS-12: Knee Braces included in price.

1 1/2”x 1 1/2”x 12 Ga. Steel 13”to 25”Between Rail Width........................................20.20 27”to 39”Between Rail Width........................................32.20

Extra Knee Braces ....... per pair.......................................19.00 • CEILING HANGERS- See Ceiling Hangers • POLY-TIER SUPPORTS- See Poly-Tier Support Pricing. • OPTIONAL DRIVES Unified Drives: (Shaft Mounted) Unified Drives: 16”to 28” 30”to 42” Center Drive 8”Drive Pulley with 075 Reducer 177.40 177.40 Center Drive 8”Drive Pulley with 090 Reducer 301.00 301.00 8”Drive Pulley

Raised Roller End Stop 2 1/8”Dia. Roller

Fixed Channel Type - Overlapping (One Direction) (Prices are for both sides.)

13”to 25”Between Rail Width........................................51.50 27”to 39”Between Rail Width........................................63.60

3 1/2”x 1 1/2”x 12 Ga..............................per foot................16.80 6 1/2”x 1 1/2”x 12 Ga..............................per foot................21.30 10”x 1 1/2”x 12 Ga................................per foot................28.30 13”x 1 1/2”x 12 Ga................................per foot................33.70 NOTE : Angle Type A and Fixed Channel Guard Rails are raised with spacer.

Hand Operated Stop (Blade or Roller Types, specify)

13”to 23”Between Rail Width......................................342.60 25”to 39”Between Rail Width......................................376.60

NOTE : If product comes in contact with guard rails, product flow will be affected.

Air Operated Linear Thruster Stop (Pin, Roller or Blade Type. Specify) 13”to 39”Between Rail Width................................... 1082.00 NOTE : Filter Regulator Unit not supplied as standard. Stops are supplied in NORMALLY DOWN position with SINGLE SOLENOID VALVE. Can be supplied in NORMALLY UP position. Can also be supplied with DOUBLE SOLENOID VALVE. Contact Factory.

Speed FPM 65 78 97 130 156 195 260 389 Max HP 1 1,2* 1 2 2 2 2 2** * Reducer size increases with 2 HP. **Contact Factory. Drive Type

• TRAFFIC COP- See Conveyor Accessories.

OVERALL FRAMEWIDTH 16" to 28" 30" to 42"

• ELECTRICAL CONTROLS- See Electrical Controls.

Center Drive (V-Belt) Low Elevation Side Mounted Center (C-Face) Low Elevation Side Mounted Center (V-Belt) Center Drive with Extended Take- Up C-Face Center Drive with Extended Take- Up V-Belt High Performance Center Drive (C-Face) Heavy Duty Center Drive (C-Face) Side Mounted End C-FaceWith Underside Take-Up Side Mounted End V-Belt With Underside Take-Up

161.40 243.00

161.40 315.80

• GALVANIZING- Contact Factory

404.50

477.00

127.40

191.00

288.70

352.40

499.20 241.40 177.40

611.40 258.30 198.70

338.00

360.10

#50 O-Ring Drive Chain........................ Add................. 186.30 #60 O-Ring Drive Chain........................ Add................. 266.00

PRICELIST | 06182019