10072020_PriceList_1.1

ABLR

• OPTIONAL EQUIPMENT (CONTINUED)

•

OPTIONAL DRIVES Unified Drives: (Shaft Mounted) Unified Drives:

16”to 28” 30”to 42” Center Drive 8”Drive Pulley with 075 Reducer 177.40 177.40 Center Drive 8”Drive Pulley with 090 Reducer 301.00 301.00 8”Drive Pulley Speed FPM 65 78 97 130 156 195 260 389 Max HP 1 1,2* 1 2 2 2 2 2** * Reducer size increases with 2 HP. **Contact Factory. Drive Type

OVERALL FRAMEWIDTH

16" to 28"

30" to 42"

Center Drive (V-Belt)

161.40 243.00 404.50 127.40 288.70 505.90 241.40

161.40 315.80 477.10 191.00 352.40 611.40

Low Elevation Side Mounted Center (C-Face) Low Elevation Side Mounted Center (V-Belt) Center Drive with Extended Take-Up C-Face Center Drive with Extended Take-Up V-Belt High Performance Center Drive (C-Face) Heavy Duty Center Drive (C - Face)

258.30 #50 O-Ring Drive Chain........................................ Add.......................................... 186.30 #60 O-Ring Drive Chain........................................ Add.......................................... 266.00

• DRIVE COMPONENT DEDUCTS Less Motor Drive, Motor Mount and Guards, but with Shaft Extension....................................Deduct...................... 504.80 Less Motor Only (1/2 HP-208/230/460/575 V-3 Ph.-60 Hz.)...... ..................................................Deduct...................... 187.80 Less Reducer*.............................Deduct...................... 223.50 *Less V-Belt Guard, Chain Guard, sheaves and sprockets when V-Belt drive is supplied. Less chain guard and sprockets when C-Face drive is supplied. • SLAVE CONNECTION KIT For Slave Driving existing curves...................................148.20 (Please Provide Sketch)

• GUARD RAILS Adjustable Universal Channel Guard Rail

• FLOOR SUPPORTS Not Included in Base Price. Use Chart Below for Required Elevation. "MS" SUPPORT Model Adjustment to Price No. Top of Roller Each *MSL-1 8 3/4" to 9 3/4" 38.30 *MSL-2 9 3/4" to 11 1/2" 38.30 *MSL-3 11 1/2" to 14 1/8" 38.30 * MS-1 13 3/4" to 15 1/2" 38.30 *MS-1.2 14 3/4" to 16 1/2" 38.30 * MS-1.4 15 3/4" to 17 1/2" 38.30 * MS-2 16 3/4" to 19 3/4" 39.50 MS-3 19 3/8" to 22 3/8" 43.50 MS-4 22 3/8" to 28 3/8" 50.10 MS-5 26 3/8" to 32 3/8" 52.30 MS-6 30 3/8" to 42 3/8" 57.70 MS-7 40 3/8" to 52 3/8" 85.20 MS-8 52 3/8" to 64 3/8" 97.30 MS-9 64 3/8" to 76 3/8" 106.60 MS-10 76 3/8" to 88 3/8" 121.50 MS-11 86 3/8" to 98 3/8" 134.40 MS-12 98 3/8" to 110 3/8" 140.60 *Less than 21 3/4”top of roller elevation– Low Elevation-Side Mounted Center Drive Required.

Both Sides................ per foot........................................... 9.90 One Side................... per foot............................................5.00 NOTE : For Diffuse or Retro-Reflective.

Fixed Channel Type - Overlapping (One Direction) (Prices are for both sides.)

3 1/2”x 1 1/2”x 12 Ga.per foot............................................16.90 6 1/2”x 1 1/2”x 12 Ga.per foot............................................21.30 10”x 1 1/2”x 12 Ga.per foot..............................................28.20 13”x 1 1/2”x 12 Ga.per foot..............................................33.80 • Angle Type“A” 1 1/2”x 1 1/2”x 12 Ga................................................................... both sides per foot............................................................5.00

• PACKAGE STOPS Angle End Stop

1 1/2”x 1 1/2”x 12 Ga. Steel 13”to 25”Between Rail Width........................................20.20 27”to 39”Between Rail Width........................................32.20

NOTE : Fixed Channel Guard Rails are raised with 2”high spacer. 1”high spacers are available. Specify.

NOTE : If product comes in contact with guard rails, product flow will be affected.

Raised Roller End Stop 2 1/8”Dia. Roller

13”to 25”Between Rail Width........................................51.50 27”to 39”Between Rail Width........................................63.60

• AP-30 PNEUMATIC PLOW- See Conveyor Accessories.

NOTE : MS-7 to MS-12: Knee Braces included in price.

• MP-30 MANUAL PLOW- See Conveyor Accessories.

Hand Operated Stop (Blade or Roller Types, Specify).

Extra Knee Braces ....... per pair.......................................19.00

• TURNING WHEEL- See Conveyor Accessories.

13”to 23”Between Rail Width......................................342.60 25”to 39”Between Rail Width......................................376.60

• CEILING HANGERS -See Ceiling Hangers

• ELECTRICAL CONTROLS- See Electrical Controls.

• POLY-TIER SUPPORTS -See Poly-Tier Support Pricing.

Air Operated Linear Thruster Stop (Pin, Roller or Blade Type. Specify) 13”to 39”Between Rail Width................................... 1082.00 NOTE : Filter Regulator Unit not supplied as standard. Stops are supplied in NORMALLY DOWN position with SINGLE SOLENOID VALVE. Can be supplied in NORMALLY UP position. Can also be supplied with DOUBLE SOLENOID VALVE. Contact Factory.

• GALVANIZING- Contact Factory

• CONSTANT AND VARIABLE SPEEDS Constant C-Face–Within 17-120 FPM......................No Charge Constant V-Belt–Minimum of 4 FPM....................................... .........................................................Use V-Belt Drive Add-On Constant Speeds Below Those Listed Above............................. .......................................................................Contact Factory Variable Speed............................See AC Variable Speed Drives

PRICELIST | 01022019