10072020_PriceList_1.1

NBEZA

Live Roller Conveyor (Zero Pressure Accumulating Type)

PRICES FOR COMPLETE CONVEYOR INCLUDE: • 1.9” Dia. x 16 Ga. Galvanized Roller (Roller on 3” Centers) in an 8 ½” x 12 Ga. Channel Frame • Accumulation Zones with EZLogic® Accumulation System • 1 HP 230/460/575/3 Shaft Mounted Hollow Bore Gearmotor • IOP Power Supply for EZLogic®. 27VDC, 100 Watt Power Supply (Requires 120 VAC or 230 VAC), Single Phase Input

• End Guards • Less Motor Controls • Less Floor Supports

• Filter/Regulator for Main Air Supply Line • Power Transmission TPU Aramid Belt

Conveyor shown with optional floor supports

U.S. Patent Numbers 5,862,907 • 7,243,781 • 7,591,366 Other Patents Pending.

Between Rail Width Overall FrameWidth

15" 18" 104 136 3020

21" 24" 113 146 3080

27" 30" 119 154 190 3200

33" 36" 125 162 3290

39" 42" 131 170 3380

Base Price

3”Per Foot Price 2”Per Foot Price Per Zone Price

NOTE : Section lengths are limited to the following zone multiples ONLY: 24”Zones – 2’, 4’, 6’, 8’, 10’, & 12’ 36”Zones – 3’, 6’, 9’, & 12’

NOTE : Total specification of product is required; product is recommended for testing. Product footprint may affect drive capacity.

PRICING EXAMPLE: 12’-0”OAL x 18”OAWWith 3”Roller Centers And (6) 24” Long Zones With MS-5 Supports BASE 12’-0”Price .....................................................3020.00 (6) Zones x 180.00...................................................1140.00 (2) MS-5 Supports......................................................104.60 Full Zone Brake Discharge...........................................150.00 12’-0”x 104.00.........................................................1248.00 ................................................................................5662.60

IMPORTANT NOTES

• OTHER LENGTHS For lengths longer add per foot price of width x additional length to base price + zone price x total number of zones.

• OTHER WIDTHS For“IN-BETWEENWIDTHS”, contact factory for lead time and pricing.

• FLOOR SUPPORTS Floor Supports are not included in base price.There are two (2) stationary floor supports required for the first bed section and one (1) support per bed section thereafter.

NOTE : OAL must be divisible by zone length. Zone length must be divisible by roller centers.

NOTE : Speeds above 120 FPM will affect product accumulation, and product drift may occur. Contact factory for speed above 120 FPM.

PRICELIST | 10012019