10072020_PriceList_1.1
PLOWS—30-MP (MANUAL) & 30-AP (PNEUMATIC) 30° Plows are used to divert product from main conveyor line to spur line. Mounts to underside of bed on“Powered belt”or “Live Roller”type conveyors. Pneumatic Only • Air Cylinder–2 in. bore double acting 6 in. stroke (10 in. to 18 in. OAW conveyors), 10 in. stroke (20 in. to 42 in. OAW conveyors)
Manual & Pneumatic • 2 in. x 2 in. x 14 ga. plow arm • 30° plow angle
• Air Requirements–Minimum Pressure 60 P.S.I.–Maximum 100 P.S.I. free air consumption per cycle–6 in. stroke at 60 P.S.I. (.105 cu. ft.), at 100 P.S.I. (.162 cu. ft.)–10 in. stroke at 60 P.S.I. (.176 cu. ft.), at 100 P.S.I. (.270 cu. ft.). • Valve–Single solenoid 4-way valve–1/4 in.–20 NPT valve ports. Electrical requirements: 120V.–1 Ph.–60 Hz.–current draw, .09 amps. • MP-30 Manual Plow 13”to 25” ..........Between Rail Width..........................468.20 27”to 39”........... Between Rail Width.........................549.80 • AP-30 Pneumatic Plow 13”to 25” ..........Between Rail Width........................1768.50 27”to 39”........... Between Rail Width.......................2105.60
INSTALLATION NOTE : To eliminate contaminants in air supply line, a filter, regulator should be installed prior to valve.
TC-250 TRAFFIC COP
The Traffic Cop controls product flow from one conveyor onto another. It allows products from one line of traffic to flow freely, without interference from another converging line of traffic. This eliminates collision of products which may cause damage and disrupt product flow. Specify model, width and degree.
• 7 arm widths, aluminum • Available in 30°, 45°, 60°, 90° & 180° applications. Includes mounting hardware. * 180° application–10”minimum required between lines • 5 lbs. Minimum PackageWeight at 65 FPM Required to Actuate Arm. • 250 lbs. Maximum Accumulated Capacity
190-NSPS & NSPSS 190-ACC, LRS, & LRSS, 190-ACZ Overall FrameWidth
138-ACC, LRS, & LRSS
Overall FrameWidth
12" to 15" 1215.00
18" to 24" 1339.30
16" to 28" 1339.30
30" to 42" 1429.90
Price Each
Price Each
TURNING WHEEL
TurningWheels are used in converging 30° and 45° spur applications. Also used at 90° (right angle) transfers where Traffic Cops, Package Stops and other product flow controlling devices are used. Wheel is mounted on adjustable bracket to insure proper package orientation through transfer. Can be mounted to slider bed or side channels of powered and gravity conveyors–specify model where applicable.
6"
2"
2"
"A" "A"
MOUNTING BRACKET
B-05568 - TurningWheel Assembly with 6”diameter wheel & mounting hardware .........................................78.30 Note: To be used on roller beds & gravity models with 90° transfer. Please specify what model the assembly will be used on.
B-10739 - TurningWheel Assembly with 6”diameter wheel & mounting hardware .........................................78.30 Note: To be used on slider beds & spur models. Please specify what model the assembly will be used on.
PRICELIST | 01022019
Made with FlippingBook Ebook Creator