10072020_PriceList_1.1

GAPPER-D/GAPPER-O • OPTIONAL EQUIPMENT (CONTINUED)

• DRIVE COMPONENT DEDUCTS (GAPPER ONLY) Less Motor Drive, Motor Mount and Guards, but with Shaft Extension.........Deduct.................................................565.00 Less Motor Only (1 HP-230/460/575V-3 Ph.-60 Hz.).......................... Deduct.........................................205.60 *Less Reducer.......... Deduct.........................................322.70 *Less V-Belt Guard, Chain Guard, sheaves and sprockets when V-Belt drive is supplied. Less chain guard and sprockets when C-Face drive is supplied. • ENCODER 10 Pulses per revolution ...............................................649.10 20 Pulses per revolution...............................................649.10 • TIMING BELT DRIVE ON DRIVE AND FEEDER CONNECTION Add on........................................................................2661.00

• FLOOR SUPPORTS Not Included in Base Price. Use Chart Below for Required Elevation. "MS" SUPPORT Model No. MIN MAX Price Each

• GUARD RAILS Adjustable Universal Channel Guard Rail

Both Sides......................................per foot....................... 9.90 One Side.........................................per foot....................... 5.00

MSL-1 MSL-2 MSL-3 MS-1 MS-1.2 MS-1.4 MS-2 MS-3 MS-4 MS-5 MS-6 MS-7 MS-8 MS-9 MS-10 MS-11 MS-12

19 20 24 25 26 27

20

38.30 38.30 38.30 38.30 38.30 38.30 39.50 43.50 50.10 52.30 57.70 85.20 97.30

Angle Type Type“A”or“B”available (Specify). Prices are for Both Sides.

21 3/4 24 3/8 25 3/4 26 3/4 27 3/4 32 5/8 38 5/8 42 5/8 52 5/8 62 5/8 74 5/8 86 5/8 98 5/8 108 5/8 120 5/8 30

21 3/4

Type“A” 1 1/2”x 1 1/2”x 12 Ga.........................per foot....................... 5.00

29 5/8 32 5/8 36 5/8 40 5/8 50 5/8 62 5/8 74 5/8 86 5/8 96 5/8 108 5/8

Type“B” 1 1/2”x 1 1/2”x 12 Ga........................per foot....................... 5.00

Overlapping Fixed Channel Type (One Direction) Prices are for Both Sides.

106.60 121.50 134.40

3 1/2”x 1 1/2”x 12 Ga.........................per foot..................... 16.90 6 1/2”x 1 1/2”x 12 Ga.........................per foot..................... 21.30 10”x 1 1/2”x 12 Ga...........................per foot..................... 28.20 13”x 1 1/2”x 12 Ga...........................per foot..................... 33.80

140.60 NOTE : MS-7 to MS-12: Knee Braces included in price.

• ELECTRICAL CONTROLS -See Electrical Controls.

Extra Knee Braces .... per pair ....................................... 19.00

• CEILING HANGERS -See Ceiling Hangers

• POLY-TIER SUPPORTS- See Poly-Tier Support Pricing.

LENGTH OF BOX

FINAL GAP

INITIAL GAP

• GAP LOGIX PACKAGE Add-On ............................................................Contact Factory NOTE : IF SUPPLIED LESS GAPLOGIX CONTROLS, CUSTOMER TO SUPPLY ELECTRICAL CONTROLS AND ASSUME RESPONSIBILITY FOR THE APPLICATION. • CONSTANT AND VARIABLE SPEEDS Constant C-Face–Up to 250 FPM.............................No Charge Variable Speed............................See AC Variable Speed Drives

FLOW

FORMULA

NOTE : As cartons pass from the infeed belt to the higher speed discharge belt, a gap is created between cartons according to the above formulas.

Length of Box + Final Gap ------------------------------- = Speed Gap Ratio (SGR) Length of Box + Initial Gap

Discharge Belt Speed Infeed Belt Speed = ----------------------- SGR

Discharge Belt Speed

Conveyor OAW 18 24 30 36 42 HP 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 5 3 3 3 5 5

65

100 150 200 250 300 350 400 450 500 550

SGR 1.25 1.50 1.75 2.00 2.25 2.50

PRICELIST | 06182019