10072020_PriceList_1.1

• BELT LACING

• DIVIDER (CENTER TYPE) Single 6”High............Add-On Per Foot Of Conveyor......32.10 Recommended for Light to Medium Duty Conveyors.

• BRAKE ROLLERS Pneumatic Friction Type (3’long) for 1 3/8”Gravity 1 1/2”and 3” Roller Centers..............................................................381.40 Pneumatic Friction Type (3’long) for 1.9”Gravity 3”Roller Centers........................................................................381.40 Pneumatic Friction Type (3’long) for NSP.............................................................................381.40 Pneumatic Friction Type (2’and 3’only) for 190-ACC......................................................................691.80 Pneumatic Friction Type (3’maximum length) for 25SR......... ....................................................................................798.30 Geared Brake Rollers on 4 1/2”centers at point of Brake.......... ....................................................................................238.40 NOTE : Above Prices Do Not Include Filter Regulator. • BEARING COVERS For 3- and 4-Bolt Flange Bearings on 4”, 6”, and 8”Pulleys..... ...................................Add Per Pulley............................65.80 • BED COVERS Underside (Slider Beds, RB, LR, ACZ, NSP, ACC)....................... ...................................Per Foot......................................19.40 Fixed Channel Guard Rails Required NOT INCLUDED In Above Price.

Belt Width Clipper SS Clipper Endless Splice 4 11.20 18.50 25.40 6 16.70 27.70 38.00 8 22.30 36.90 50.60 10 27.90 46.30 63.40 11.5 33.50 55.40 76.00 12 33.50 55.40 76.00 14 39.10 64.60 88.80 16 44.60 74.00 101.40 17.5 50.20 82.70 114.60 18 50.20 82.70 114.60 20 55.80 94.40 126.80 22 61.40 101.60 139.40 23.5 67.00 110.90 152.10 24 67.00 110.90 152.10 26 72.60 120.00 164.70 28 77.30 129.30 177.40 29.5 83.80 138.60 190.10 30 83.80 138.60 190.10 32 85.70 147.80 202.80 34 95.00 157.00 215.50 35.5 100.50 166.30 228.00 36 100.50 166.30 228.00 38 106.10 175.50 240.80 40 111.70 184.70 253.50 41.5 117.30 194.00 266.20 42 117.30 194.00 266.20 44 122.90 203.20 278.90 46 128.40 212.50 291.50 47.5 134.00 221.70 304.20 48 134.00 221.70 304.20 50 139.60 230.90 316.90 52 145.30 240.20 329.50 53.5 148.90 249.40 342.30 54 148.90 249.40 342.30 56 156.40 258.60 354.90 58 161.50 267.90 367.50 60 167.60 277.00 380.20 62 173.20 286.40 392.90 64 178.70 295.60 405.70 66 183.20 304.80 418.40 68 189.90 314.10 430.90 70 195.50 323.30 443.60 72 201.10 332.50 456.30 • BELT SCRAPER Belt or Brush (Specify)...................................................... 16”- 42”................................................................204.00 44”- 60”................................................................234.20 Mounted under discharge end.

NOTE : Specify clearance from belt to top of mounting bracket.

COMMON DRIVE (No Add-On or Deduct) Several parallel conveyors may be driven from one Common Drive as shown in drawing below. There is NO ADD-ON OR DEDUCT for this drive arrangement. Drive horsepower should be calculated based on total of common driven conveyors.

•

LANE DIVIDER

MOUNTING BRACKET

BELT

SPECIFY (4" MINIMUM)

BED SECTION

CHAIN COUPLING

DRIVE

• CHUTE Model TR Type Bed Sections (2 1/2”high sides includes 5’ Straight Section, Noseover and Noseunder) are used for Chutes.

BETWEEN SIDE GUARDWIDTHS

8" 32" 984 1,012 1,039 1,067 1,095 1,123 1,151 1,179 1,234 1,318 10" 12" 14" 16" 18" 20" 22" 26"

* LIST PRICE

PER FOOT

22

24

26

28

30

31

33

34

39

43

5' RADIUS 38.30 MS-2 10 5/8" to 13 5/8" 39.50 MS-3 13 1/8" to 16 1/8" 43.50 MS-4 16 1/8" to 22 1/8" 50.10 MS-5 20 1/8" to 26 1/8" 52.30 MS-6 24 1/8" to 36 1/8" 57.70 MS-7 34 1/8" to 46 1/8" 85.20 MS-8 46 1/8" to 58 1/8" 97.30 MS-9 58 1/8" to 70 1/8" 106.60 MS-10 70 1/8" to 82 1/8" 121.50 MS-11 80 1/8" to 92 1/8" 134.40 MS-12 92 1/8" to 104 1/8" 140.60 NOTE : MS-3 to MS-12: Knee Braces included in price. Knee Braces..............Per pair .................................................19.00 30˚ NOSEOVER * NO DEDUCT FOR LESS THAN 5’-0”STRAIGHT SECTION. * Prices DO NOT include supports. SEE CHART BELOW FOR PRICING. TR CHUTE SUPPORTS Model No. Adjustment Price Each MS-1 7 5/8" to 9 3/8" MS-1.2 8 5/8" to 10 3/8" MS-1.4 9 5/8" to 11 3/8" 38.30 38.30

Less Noseover....................................Deduct........................................229.80 Less Noseunder..................................Deduct........................................229.80

5' RADIUS

30˚

5'-0"

2-1/2" HIGH SIDES

5‘ STRAIGHT SECTION

NOSEUNDER

• BRACKETS “K”Attachment Type . . . . . .Per Pair...............................19.50

• HIGHER SIDES

Sides Higher than 2 1/2”per foot both sides: 4”High..........................................................................13.00 6”High..........................................................................15.30 9”HIgh..........................................................................18.70 12”High........................................................................22.90 Note: When pricing higher sides, use 3’0”for length of Noseover and/or Noseunder.

PRICELIST | 12202019