10072020_PriceList_1.1

SB

• OPTIONAL EQUIPMENT (CONTINUED)

• FLOOR SUPPORTS Not Included in Base Price. Use Chart Below for Required Elevation. "MS" SUPPORT Model No. Adjustment to Top of Belt Price Each

• UNDERSIDE TAKE-UP Provides 16”of Belt Take-Up on Long Units. BedWidths

• GUARD RAILS NOTE : Available in 5’and 10’lengths only from Stockyard. Contact factory for other lengths. Adjustable Universal Channel Guard Rail Both Sides ..................................... per foot ..................... 9.90 One Side ........................................ per foot ..................... 5.00 Angle Type Type“A”or“B”available (Specify). Prices are for Both Sides. Type“A” 1 1/2”x 1 1/2”x 12 Ga ........................ per foot ..................... 5.00 Type“B” 1 1/2”x 1 1/2”x 12 Ga ....................... per foot ..................... 5.00

Price

16" to 28" 30" to 42"

489.60 583.70 1217.70 1435.60

48"

*MS-1 *MS-1.2 *MS-1.4 *MS-2

13 7/8" to 15 5/8" 14 7/8" to 16 5/8" 15 7/8" to 17 5/8" 16 7/8" to 19 7/8" 19 1/2" to 22 1/2" 22 1/2" to 28 1/2" 26 1/2" to 32 1/2" 30 1/2" to 42 1/2" 40 1/2" to 52 1/2" 52 1/2" to 64 1/2" 64 1/2" to 76 1/2" 76 1/2" to 88 1/2" 86 1/2" to 98 1/2" 98 1/2" to 110 1/2"

38.30 38.30 38.30 39.50 43.50 50.10 52.30 57.70 85.20 97.30 106.60 121.50 134.40 140.60

54" to 60"

• CONSTANT AND VARIABLE SPEEDS Constant C-Face–Within 17-135 FPM .................... No Charge Constant V-Belt–Minimum of 4 FPM ...................................... ........................................................ Use V-Belt Drive Add-On Constant Speeds Below Those Listed Above ............................ ...................................................................... Contact Factory Variable Speed .......................... See AC Variable Speed Drives • DRIVE COMPONENT DEDUCTS Less Motor Drive, Motor Mount and Guards, but with Shaft Extension ------------------------- Deduct ------------- 565.00 Less Motor Only (1 HP-208/230/460/575V-3 Ph.-60 Hz. ............................... Deduct ...................................... 205.60 Less Reducer* ......... Deduct ...................................... 223.50 *Less V-Belt Guard, Chain Guard, sheaves and sprockets when V-Belt drive is supplied. Less chain guard and sprockets when C-Face drive is supplied. • LARGER TAIL PULLEY 6” dia. tail pulley IN PLACE OF 4” dia. when not furnished as standard ..................................................................... 235.90

MS-3 MS-4 MS-5 MS-6 MS-7 MS-8 MS-9

MS-10 MS-11 MS-12

Fixed Channel Type Prices are for Both Sides.

* Less than 19 1/2”top of belt elevation– Side Mounted Drive Required. (With 8”dia. Pulley NOTE : MS-7 to MS-12: Knee Braces included in price.

3 1/2”x 1 1/2”x 12 Ga. ....................... per foot ................... 14.90 6 1/2”x 1 1/2”x 12 Ga. ....................... per foot ................... 17.70 10”x 1 1/2”x 12 Ga. ......................... per foot ................... 25.00 13”x 1 1/2”x 12 Ga. ......................... per foot ................... 30.20

Extra Knee Braces ... per pair ....................................... 19.00

• ELECTRICAL CONTROLS -See Electrical Controls.

• CASTERS -See Casters

• GALVANIZING -Contact Factory

• CEILING HANGERS -See Ceiling Hangers

• POLY-TIER SUPPORTS -See Poly-Tier Support Pricing.

• OPTIONAL DRIVES Unified Drives: (Shaft Mounted) Unified Drives:

16”to 28” 30”to 42” 48” 54”to 58” Center Drive 8”Drive Pulley with 075 Reducer 177.40 177.40 177.40 177.40 Center Drive 8”Drive Pulley with 090 Reducer 301.00 301.00 301.00 301.00 8”Drive Pulley

Speed FPM 65 78 97 130 156 195 260 389 Max HP 1 1,2* 1 2 2 2 2 2** * Reducer size increases with 2 HP. **Contact Factory.

Drive Type

OVERALL FRAMEWIDTH

16" to 28"

30" to 42"

48"

54”to 60"

Center Drive (V-Belt)

161.40 250.30 411.60 127.40 288.70 499.20 241.40 161.40 177.40 337.10 N/C

161.40 325.20 486.50 191.00 352.40 611.40 258.30 161.40 198.70 346.00 N/C

161.40 401.90 563.30 254.60 415.90 703.10 337.00 161.40 204.00 354.80 N/C

161.40 401.90 563.30 254.60 415.90 703.10 337.00 161.40 204.00 354.80 N/C

Low Elevation Side Mounted Center (C-Face) Low Elevation Side Mounted Center (V-Belt) Center Drive with Extended Take-Up C-Face Center Drive with Extended Take-Up V-Belt High Performance Center Drive (C-Face)

Heavy Duty Center C-Face End DriveWith (C-Face) End DriveWith (V-Belt) Side Mounted End C-Face Side Mounted End V-Belt

NOTE: Underside Take-Up Required on lengths longer than 22”-0’with End Drive. #50 O-Ring Drive Chain ....... Add..................................186.30 #60 O-Ring Drive Chain ....... Add..................................266.00

PRICELIST | 06182019