10072020_PriceList_1.1

SBI

• OPTIONAL EQUIPMENT (CONTINUED)

• MOTORS Extra Motor Price for OTHER THAN: 1 HP–208/230/460/575 V–3 Ph.–60 Hz.–Totally Enclosed. Speed affects horsepower requirements.

Holding Brake 208/230/460/575 V

Holding Brake 115 / 230 V 1 Ph. - 60 Hz.

Cycling Brake 208/230/460 V 3 Ph.- 60 Hz.

Cycling Brake

Cycling Brake

H.P. REQ

575 V

208/230/460/575 V

3 Ph.- 60 Hz.

3 Ph.- 60 Hz.

3 Ph.- 60 Hz.

1 2

N/C

110.00 1378.20

637.00 897.70

637.00 897.70

1827.30 2013.60

385.80

• FLOOR SUPPORTS Not Included in Base Price. Use Chart Below for Required Elevation. "MS" SUPPORT Model No. Adjustment to Top of Belt

• CONSTANT AND VARIABLE SPEEDS Constant C-Face–Within 17-135 FPM.......................No Charge Constant V-Belt–Minimum of 7 FPM with a 1 HP motor requires 5A Reducer and V-Belt Drive....................................... Add On............................................. ...........................410.00 Constant Speeds Below Those Listed Above.....Contact Factory • DRIVE COMPONENT DEDUCTS Less Motor Drive, Motor Mount and Guards, but with Shaft Extension.......................................... Deduct............... 729.10 Less Brake Motor (1 HP-208/230/460/575V-3 Ph.-60 Hz.)....... ......................................................... Deduct................393.30 Less Reducer*.................................... Deduct................223.40 *Less V-Belt Guard, Chain Guard, sheaves and sprockets when V-Belt drive is supplied. Less chain guard and sprockets when C-Face drive is supplied.

• VARIABLE SPEED BRAKE MOTOR DRIVES WITH HIGH CYCLE BRAKE MOTOR (SPROCKET DRIVEN) AC VARIABLE SPEED DRIVES (ALL MOTORS ARE ENERGY EFFICIENT 3 PHASE) SINGLE PHASE CONTROLLER INPUT H.P. ADD ON PRICE 115 VOLT ADD ON PRICE 208 VOLT ADD ON PRICE 230 VOLT 1 VSC-11 1998.10 VSC-13 1790.10 VSC-13 1790.10 2 N/A VSC-14 2209.80 VSC-14 2209.80 THREE PHASE CONTROLLER INPUT H.P. ADD ON PRICE 208 VOLT ADD ON PRICE 230 VOLT ADD ON PRICE 460 VOLT 1 VSC-16 1909.60 VSC-16 1843.90 VSC-19 2099.70 2 VSC-17 2327.90 VSC-17 2391.60 VSC-20 2447.70 • VARIABLE SPEED BRAKE MOTOR DRIVES WITH HIGH CYCLE BRAKE MOTOR (TIMING BELT DRIVEN) AC VARIABLE SPEED DRIVES (ALL MOTORS ARE ENERGY EFFICIENT 3 PHASE) SINGLE PHASE CONTROLLER INPUT H.P. ADD ON PRICE 115 VOLT ADD ON PRICE 208 VOLT ADD ON PRICE 230 VOLT 1 VSC-11 3203.60 VSC-13 3036.90 VSC-13 3036.90 2 N/A VSC-14 3432.50 VSC-14 3560.10 THREE PHASE CONTROLLER INPUT H.P. ADD ON PRICE 208 VOLT ADD ON PRICE 230 VOLT ADD ON PRICE 460 VOLT 1 VSC-16 3107.80 VSC-16 3107.80 VSC-19 3107.80 2 VSC-17 3560.10 VSC-17 3689.70 VSC-20 3689.70 Mount andWire Controller....................................................... ........................................Add-on.................................246.10 NOTE #1: All above V/S Drive Kits include NEMA 1 / IP30 Junction Box, Controller, EA-068A Brake Control Kit and Brake Motor, and either #60 Chain with Taper Lock Sprockets OR Timing Belt, Sprockets and Belt. NOTE #2: Good for cycle rates of up to 15 cycles per minute, at 1/2 second ramp time, with a maximum speed of 250 FPM.

Price Each 38.30 38.30 38.30 38.30 38.30 38.30 39.50 62.70 69.30 71.40 76.80 85.20 97.30

MSL-1 MSL-2 MSL-3 MS-1 MS-1.2 MS-1.4 MS-2 MS-3 MS-4 MS-5 MS-6 MS-7 MS-8 MS-9 MS-10 MS-11 MS-12

9 1/16" to 10 1/16" 10 1/16" to 11 13/16" 11 13/16" to 14 7/16" 14 1/16" to 15 13/16" 15 1/16" to 16 13/16" 16 1/16" to 17 13/16" 17 1/16" to 20 1/16" 19 11/16" to 22 11/16" 22 11/16" to 28 11/16" 26 11/16" to 32 11/16" 30 11/16" to 42 11/16" 40 11/16" to 52 11/16" 52 11/16" to 64 11/16" 64 11/16" to 76 11/16" 76 11/16" to 88 11/16" 86 11/16" to 98 11/16" 98 11/16" to 110 11/16"

106.60 121.50 134.40

• GUARD RAILS Adjustable Universal Channel Type Guard Rail

140.60 NOTE : MS-3 to MS-12: Knee Braces included in price. Knee Braces......................Add On Per Pair.......................19.00

Both Sides......................................... per foot...................9.90 One Side............................................ per foot...................5.00

Overlapping Fixed Channel Type (One Direction) Prices are for Both Sides.

• CEILING HANGERS- See Ceiling Hangers

3 1/2”x 1 1/2”x 12 Ga............................ per foot.................16.80 6 1/2”x 1 1/2”x 12 Ga............................ per foot.................21.30 10”x 1 1/2”x 12 Ga.............................. per foot.................28.30 13”x 1 1/2”x 12 Ga.............................. per foot.................33.70 Non-Overlapping Fixed Channel Type (Bi-Directional) Prices are for Both Sides. 3 1/2”x 1 1/2”x 12 Ga............................ per foot.................14.80 6 1/2”x 1 1/2”x 12 Ga............................ per foot.................17.70 10”x 1 1/2”x 12 Ga.............................. per foot.................25.00 13”x 1 1/2”x 12 Ga.............................. per foot.................30.20 • LARGER TAIL PULLEY 6”dia. Tail Pulley in place of 4”dia. when not furnished as standard....................................................................... 235.90

• UNDERTRUSSING (MAX. 30” OAW) Undertrussing Kit Assembly (A)....................Each..........188.00 Undertrussing Kit Assembly (B)....................Each..........188.00 Undertrussing Kit Assembly (C)....................Each..........188.00 NOTE : Specify quantity each. NOTE : Undertrussing not recommended for units over 40’ bed length, floor supports required.

• ELECTRICAL CONTROLS- See Electrical Controls.

• GALVANIZING- Contact Factory

• POWERED FEEDER (DEDUCTS) Ultimate 140 BBS

NOTE : Overall length of 35 1/2”requires one support. Overall length of 50 1/2”or more requires two supports. Supports not included in base price.

Chain Driven Feeder

Belt Widths

10"

12"

14"

16"

18"

20"

22"

24"

28"

30"

34"

36"

Min. Length Overall

35 1/2" 70.90

35 1/2" 71.30

50 1/2" 81.90

50 1/2" 86.80

50 1/2" 94.00

50 1/2" 99.50

50 1/2" 104.80

67 1/2" 110.00

79 1/2" 120.50

79 1/2" 126.00

91 1/2" 140.20

91 1/2" 147.10

Price Per Foot

* Less Feeder Deduct

1048.40 1103.40 1278.90 1337.50 1396.10 1454.50 1665.60 1853.70 2048.10 2258.20 2428.50 2725.30

* Will be supplied with rounded end in lieu of feeder

PRICELIST | 01022019