10072020_PriceList_1.1

TH

• FLOOR SUPPORTS Not Included in Base Price. Use Chart Below for Required Elevation. • OPTIONAL EQUIPMENT

• TWO-PULLEY HITCH Integral Feeder Connection. 15”minimum elevation top of belt.

BedWidth

16"

22"

28"

34"

40"

46"

52"

58"

"MS" SUPPORT Adjustment to Top of Belt 21 3/8" to 27 3/8" 25 3/8" to 31 3/8" 29 3/8" to 41 3/8" 39 3/8" to 51 3/8" 51 3/8" to 63 3/8" 63 3/8" to 75 3/8" 75 3/8" to 87 3/8" 85 3/8" to 97 3/8" 97 3/8" to 109 3/8"

Price

746.80

814.20

883.50

950.80

1020.10 1087.30 1154.70 1222.40

Model No.

Price Each 50.10 52.30 57.70 85.20 97.30 106.60 121.50 134.40

Specify degree 5°, 10°, 12.5°, 15º, or 20°.

MS-4 MS-5 MS-6 MS-7 MS-8 MS-9

• HIGHER SIDES (Vertical) Sides Higher than 6”above belt. 12”High One Side.................. per foot............................................4.40 18”High One Side................... per foot............................................8.60 24”High One Side.................. per foot..........................................16.00 • HIGHER SIDES (Vertical Channel Flared 30º) 6”High One Side................... per foot............................................3.40 12”High One Side.................. per foot............................................7.50 18”High One Side................... per foot..........................................11.90 24”High One Side.................. per foot..........................................19.30

• UNDERSIDE TAKE-UP BedWidths

Manual 535.70 583.70 1435.60

Pneumatic 2128.50 2305.90 2660.70

16" to 28" 34" to 40" 46" to 58"

MS-10 MS-11 MS-12

140.60 NOTE : MS-7 to MS-12: Knee Braces included in price. NOTE : Knee Braces are required on incline or decline units with MS-4 or higher supports.

• CONSTANT AND VARIABLE SPEEDS Constant C-Face–Within 17-135 FPM...................................... ...............................................................................No Charge Constant Speeds Below Those Listed Above............................. .......................................................................Contact Factory Variable Speed............................See AC Variable Speed Drives • DRIVE COMPONENT DEDUCTS Less Motor Drive, Motor Mount and Guards, but with Shaft Extension.........Deduct.................................................565.00 Less Motor Only (1 HP-208/230/460/575V-3 Ph.-60 Hz.).......................... Deduct.........................................205.60 Less Reducer*.......... Deduct.........................................223.50 *Less V-Belt Guard, Chain Guard, sheaves and sprockets when V-Belt drive is supplied. Less chain guard and sprockets when C-Face drive is supplied. • LARGER TAIL PULLEY 6” dia. Tail Pulley in place of 4” dia. when not furnished as standard...................................................235.90

Extra Knee Braces ....... per pair.......................................19.00

• CEILING HANGERS -See Ceiling Hangers

• POLY-TIER SUPPORTS -See Poly-Tier Support Pricing.

• ELECTRICAL CONTROLS- See Electrical Controls.

• GALVANIZING -Contact Factory

• OPTIONAL DRIVES . Unified Drives: (Shaft Mounted) Unified Drives:

16”to 28” 30”to 42” 46”to 58” Center Drive 8”Drive Pulley with 075 Reducer 177.40 177.40 177.40 Center Drive 8”Drive Pulley with 090 Reducer 301.00 301.00 301.00 8”Drive Pulley

Speed FPM 65 78 97 130 156 195 260 389 Max HP 1 1,2* 1 2 2 2 2 2** * Reducer size increases with 2 HP. **Contact Factory. Drive Type Low Elevation Side Mounted Center Drive (C-Face) Low Elevation Side Mounted Center Drive (V-Belt) Center Drive with Extended Take-Up (C-Face) Center Drive with Extended Take-Up (V-Belt) High Performance Center Drive (C-Face) Heavy Duty Center Drive (C-Face) Center Drive (V-Belt)

BEDWIDTHS

16" to 28" 161.40 250.30 411.60 127.40 288.70 499.20 750.40

34 to 40" 161.40 325.20 486.50 191.00 352.40 611.40 1000.50 161.40 198.70 346.00 N/C

46”to 58” 161.40 401.90 563.30 254.60 415.90 703.10 1176.10 161.40 204.00 354.80 N/C

End Drive (C-Face) End Drive (V-Belt)

N/C

161.40 177.40 337.10

Side Mounted End Drive with Underside Takeup (C-Face) Side Mounted End Drive with Underside Takeup (V-Belt) NOTE : End drive assembly with 8”dia. drive pulley requires an Underside Take-Up on lengths longer than 22’-0”. • UNDERSIDE BED COVER Less Underside Bed Cover, but with snub roller guards. DEDUCT Per Foot of Conveyor Length. BedWidth Deduct 16" 22" 28" 34" • NOSEOVER Fixed Single Noseover for 5º, 10º, 12 1/2º, 15º, or 20º Inclines..................... Add-On........................................597.70 NOTE : Brakemotor required on Incline or Decline Units greater than 10°.

40" 58" 9.60 11.50 13.10 15.00 16.70 18.60 20.60 21.20 46" 52"

PRICELIST | 07082019