10072020_PriceList_1.1

TL

• OPTIONAL EQUIPMENT (CONTINUED)

• OPTIONAL DRIVES Unified Drives: (Shaft Mounted) Unified Drives:

• COUPLING HARDWARE *Gravity Conveyor Bracket w/ Pop-Out Roller* ....................... ................................ per end ........................................ 57.00 *Butt Couplings with Pop-Out Roller ...................................... ................................ per end ........................................ 53.00 **System End Roller Assembly** ............................................ ................................ per end ...................................... 146.10 *24”Wide Belt Only. ** NOTE : Center drive required if nose rollers used on each end Tail Pulley - 2 1/4”Dia ................................................................ ................................ per end ...................................... 138.40 *Through 24”Wide Belt Only. **NOTE : When System End is supplied on both ends, Center Drive is required. See“Optional Drive Chart”for Center Drive Price. • GUARD RAILS NOTE : Available in 5’and 10’lengths only. Contact factory for other lengths. Adjustable Universal Channel Guard Rail Both Sides ............... per foot ......................................... 9.90 One Side .................. per foot.......................................... 5.00 HEIGHT (Both Sides-Per Foot) TYPE Solid Side PC Style 2" 20.50 N/A 3 1/2" N/A 24.20 4" 21.20 N/A 6" 22.70 22.70 9" 26.40 26.40 12" 29.40 29.40 (PC Type Guards Only - 5 ft. and 10 ft. Lengths available two weeks from factory. Other Lengths available. Contact factory for lead time.) NOTE : Solid Side Guards mount vertically on outside of conveyor bed, PC Type Guards mount on top of bed. • FILLER PLATES For Solid Side Guards (NOT AVAILABLE on 2”High Guards) ...... ................................ per joint ...................................... 47.30 • ELECTRICAL CONTROLS -See Electrical Controls. • TROUGHING ATTACHMENT -See Conveyor Accessories. • GALVANIZING -Contact Factory • ELECTRICAL CONTROLS -See Electrical Controls. • TRANSFERS (Belt Over Belt Type)-See Conveyor Accessories. • TROUGHING ATTACHMENT -See Conveyor Accessories. • GALVANIZING -Contact Factory

• FLOOR SUPPORTS Not Included in Base Price. Use Chart Below for Required Elevation. "MS" INTERMEDIATE & TAIL SUPPORT Model No. Adjustment to Top of Belt Price Each

30”to 42” 48” 54”to 58”

End Drive 8”Drive Pulley 177.40 177.40 177.40 Center Drive 8”Drive Pulley with 075 Reducer 1007.70 1144.50 1144.50 Center Drive 8”Drive Pulley with 090 Reducer 1131.00 1268.00 1268.00 8”Drive Pulley Speed FPM 65 78 97 130 156 195 260 389 Max HP 1 1,2* 1 2 2 2 2 2** * Reducer size increases with 2 HP. **Contact Factory. Drive Type BEDWIDTHS 30" to 42" 48" 477.10 551.60 551.60 Stacked End Drive (C-Face)** 168.40 195.20 195.20 Stacked End Drive (V-Belt)** 329.80 356.60 356.60 Center (C-Face) 830.30 967.10 967.10 Center (V-Belt) 991.60 1128.30 1128.30 Side Mounted Center (C-Face) 1145.80 1357.10 1357.10 Side Mounted Center (V-Belt) 1221.90 1419.10 1419.10 Center w/ Ext.Take-Up C-Face 1084.90 1158.20 1158.20 Center w/ Ext. Take-Up V-Belt 1118.80 1319.60 1319.60 High Perf. Center C-Face 1536.10 1874.80 1874.80 Heavy Duty Center C-Face 921.90 1088.50 1088.50 #50 O-Ring Drive Chain .............. Add ......................... 186.30 #60 O-Ring Drive Chain .............. Add ......................... 266.00 **Contact factory for minimum elevations. • UNDERSIDE TAKE-UP Provides 16”of Belt Take-Up on Long Units. Required on Incline Units with Powered Feeders and End Drives. BedWidths Price 30" 583.70 36" 583.70 42" 583.70 48" 1217.70 54”to 58" 1435.60 • CONSTANT AND VARIABLE SPEEDS Constant C-Face–Within 26-135 FPM ..................................... ............................... End Drive Only ...................... No Charge NOTE : When a 2 HP motor is required, 26 FPM is minimum speed, and a V-Belt Drive is required. Constant V-Belt– Minimum of 8 FPM ................................................................. ........................................................ Use V-Belt Drive Add-On Constant Speeds Below Those Listed Above ............................ ...................................................................... Contact Factory Variable Speed .......................... See AC Variable Speed Drives • DRIVE COMPONENT DEDUCTS Less Motor Drive, Motor Mount and Guards, but with Shaft Extension ................ Deduct ...................................... 565.00 Less Motor Only (1 HP-208/230/460/575V-3 Ph.-60 Hz........... ............................... Deduct ...................................... 205.60 *Less Reducer ......... Deduct ...................................... 223.50 *Less V-Belt Guard, Chain Guard, sheaves and sprockets when V-Belt drive is supplied. Less chain guard and sprockets when C-Face drive is supplied. • POWERED FEEDER Prices for Powered Feeder Include: Black Ultimate 140 BBS Belt, Bed, Drive & Tail Pulleys NOTE : Adjustable Floor Supports Not Included In Base Price NOTE : (2) Adjustable Floor Supports Required. Gravity Conveyor Bracket with “Pop-Out” Roller on Tail End (24”Wide Belt Only) NOTE : NO DEDUCT for Feeders less than minimum lengths. Shorter lengths COULD CAUSE IMPROPER BELT TRACKING. NOTE : With System End Roller Assembly Add 4” to OAL. Underside Take-Up required on Incline Units with Power Feeders and End Drives. CHAIN DRIVENTYPE BELTWIDTHS 24" 30" 36" 42" 48" 52" Min. Length Overall 63 1/2" 75 1/2" 87 1/2" 105 1/2" 120 1/2" 129 1/2" Price 1853.70 2258.20 2634.10 3010.40 3388.10 3658.40 Price Per Foot 110.00 135.90 147.10 166.80 188.20 193.80 54”to 58” End Drive (V-Belt) Side Mounted End (C-Face) Side Mounted End (V-Belt) 161.40 161.40 161.40 315.80 390.40 390.40

*MSL-2 *MSL-3 *MS-1 *MS-1.2 *MS-1.4 *MS-2 *MS-3

10" to 11 1/2" 11 1/2" to 14 1/8" 13 3/4" to 15 1/2" 14 3/4" to 16 1/2" 15 3/4" to 17 1/2" 16 3/4" to 19 3/4" 19 3/8" to 22 3/8" 22 3/8" to 28 3/8" 26 3/8" to 32 3/8" 30 3/8" to 42 3/8" 40 3/8" to 52 3/8" 52 3/8" to 64 3/8" 64 3/8" to 76 3/8" 76 3/8" to 88 3/8" 86 3/8" to 98 3/8" 98 3/8" to 110 3/8" Adjustment to Top of Belt 10" to 10" 11" to 11" 12" to 12" 13" to 13" 14" to 14" 15" to 15" 16" to 16" 16 9/16" to 18 5/16" 17 9/16" to 19 5/16" 18 9/16" to 20 5/16" 19 9/16" to 22 5/16" 22 1/16" to 25 1/16" 25 1/16" to 31 1/16" 29 1/16" to 35 1/16" 33 1/16" to 45 1/16" 43 1/16" to 55 1/16" 55 1/16" to 67 1/16" 67 1/16" to 79 1/16" 79 1/16" to 91 1/16" 89 1/16" to 101 1/16" 101 1/16" to 113 1/16"

38.30 38.30 38.30 38.30 38.30 39.50 43.50 50.10 52.30 57.70 85.20 97.30 Price Each 38.30 38.30 38.30 38.30 38.30 38.30 38.30 38.30 38.30 38.30 39.50 43.50 50.10 52.30 57.70 85.20 97.30 106.60 121.50 134.40 140.60 106.60 121.50 134.40

MS-4 MS-5 MS-6 MS-7 MS-8 MS-9

MS-10 MS-11 MS-12

"MSD" DRIVE SUPPORT

Model No.

*MSD-0-10 *MSD-0-11 *MSD-0-12 *MSD-0-13 *MSD-0-14 *MSD-0-15 *MSD-0-16

*MSD-1 MSD-1.2 MSD-1.4 MSD-2 MSD-3 MSD-4 MSD-5 MSD-6 MSD-7 MSD-8 MSD-9 MSD-10 MSD-11 MSD-12

140.60 * Less than 19 1/2”top of belt elevation....................................... .................................................. Side Mounted Drive Required NOTE : MS-7 to MS-12 and MSD-7 to MSD-12: Knee Braces included in price. NOTE : Knee Braces are required on incline or decline units with MS-3 or higher supports. Extra Knee Braces .... per pair ....................................... 19.00 • CASTERS -See Casters • UNDERTRUSSING (MAX. 30”OAW) Undertrussing Kit Assembly (A).......... Each ................ 188.00 Undertrussing Kit Assembly (B).......... Each .................188.00 Undertrussing Kit Assembly (C).......... Each .................188.00 NOTE : Specify quantity each. NOTE : Undertrussing not recommended for units over 40’ bed lengths; floor supports required. • CEILING HANGERS -See Ceiling Hangers • POLY-TIER SUPPORTS -See Poly-Tier Support Pricing. • NOSEOVER Adjustable type. Support not included in base price. DOES NOT include bed length. Single ...................... (0° to 15°) ................................. 223.60 Double ..................... (0° to 30°) ................................. 315.80 NOTE : Brakemotor required on Incline or Decline Units greater than 10°.

#50 O-Ring Chain on Slave Connection ..... Add 133.20 #60 O-Ring Chain on Slave Connection ..... Add 177.40

PRICELIST | 04022019