10072020_PriceList_1.1

TR

• OPTIONAL EQUIPMENT (CONTINUED)

• CASTERS -See Casters • CEILING HANGERS -See Ceiling Hangers • POLY-TIER SUPPORTS -See Poly-Tier Support Pricing. • UNDERSIDE TAKE-UP Provides 16”of Belt Take-Up on Long Units. Required on Incline Units with Powered Feeders and End Drives. BedWidths Price 8" to 16" 489.60 18" to 22" 535.70 26" to 32" 583.70 • CONSTANT AND VARIABLE SPEEDS Constant C-Face–Within 17-135 FPM ..................................... ............................... End Drive Only ...................... No Charge Constant V-Belt–Minimum of 3.5 FPM ................................... When a 2 HP motor is required, 8 FPM is minimum speed, and a V-Belt Drive is required. ............................... - Use V-Belt Drive Add-On Constant Speeds Below Those Listed Above ............................ ...................................................................... Contact Factory Variable Speed .......................... See AC Variable Speed Drives • DRIVE COMPONENT DEDUCTS Less Motor Drive, Motor Mount and Guards, but with Shaft Extension ................ Deduct ...................................... 504.80 Less Motor Only ( HP-208/230/460/575V-3 Ph.-60 Hz.) ....... ................................................... Deduct ....................187.80 Less Reducer* ............................. Deduct ................... 223.50 *Less V-Belt Guard, Chain Guard, sheaves and sprockets when V-Belt drive is supplied. Less chain guard and sprockets when C-Face drive is supplied. • COUPLING HARDWARE * Gravity Conveyor Bracket w/ Pop-Out Roller* .......................... ................................ per end ........................................ 57.00 Butt Couplings with Pop-Out Roller ........................................ ................................ per end ........................................ 53.00 Nose Roller Assembly - 1 1/8”Dia .............................................. ................................ per end ...................................... 363.90 NOTE : Center drive required if nose rollers used on each end Tail Pulley - 2 1/4”Dia ................................................................ ................................ per end ...................................... 138.40 *Through 24”Wide Belt Only. Prices for Powered Feeder Include: Black Ultimate 140 BBS Belt, Bed, Drive & Tail Pulleys NOTE : Adjustable Floor Supports Not Included In Base Price NOTE : Overall length of 29 1/2” requires 1 support. Overall length of 44 1/2”or more requires 2 supports. Gravity Conveyor Bracket with “Pop-Out” Roller on Tail End (Through 24”Wide Belt Only) • POWERED FEEDER • LARGER DRIVE OR TAIL PULLEY BedWidths 8" Dia. Drive Pulley in Lieu of 4" Dia. 6" Dia. Tail Pulley in Lieu of 4" Dia. 8" 10" 12" 14" 16" 18" 20" 22" 26" 406.30 480.80 534.60 606.60 235.90 32"

• FLOOR SUPPORTS Not Included in Base Price. Use Chart Below for Required Elevation. "MS" SUPPORT Model No. Adjustment to Top of Belt Price Each

• HIGHER SIDES Sides Higher than 2 1/2”per foot both sides:

4”High .......................................................................... 13.00 6”High .......................................................................... 15.30 9”High .......................................................................... 18.70 12”High ........................................................................ 22.90 NOTE 1: For Higher Sides with Style“A”or Style“B”Design, add Higher Side Price to Special Side Price. NOTE 2: Special Sides Not Available with Side Mounted Center and Overhead Drive. • FILLER PLATES For 2 1/2”High Guards.........................................47.10 per joint For 4”to 12”High Guards...................................47.10 per joint • SPECIAL SIDES Style“A”One Side Per Foot ....................................................... ................................ PLUS Higher Side.............................3.80 Style“B”One Side Per Foot ...................................................... ................................ PLUS Higher Side.............................7.10 Both Styles Available in 1 ft. Increments. Other lengths, contact factory for lead time.

* MS-1 * MS-1.2 * MS-1.4 * MS-2

11 1/4" to 13" 12 1/4" to 14" 13 1/4" to 15" 14 1/4" to 17 1/4" 16 7/8" to 19 7/8" 19 7/8" to 25 7/8" 23 7/8" to 29 7/8" 27 7/8" to 39 7/8" 37 7/8" to 49 7/8" 49 7/8" to 61 7/8" 61 7/8" to 73 7/8" 73 7/8" to 85 7/8" 83 7/8" to 95 7/8" 95 7/8" to 107 7/8"

38.30 38.30 38.30 39.50 43.50 50.10 52.30 57.70 85.20 97.30 106.60 121.50 134.40 140.60

**MS-3

MS-4 MS-5 MS-6 MS-7 MS-8 MS-9 MS-10 MS-11 MS-12

* Less than 16”top of belt elevation– . **Less than 17”top of belt elevation– .

Side Mounted Drive Required.

Side Mounted Drive Required (With 8”dia. Drive Pulley). NOTE : MS Support adjustment is for 4”drive, intermediate, and tail sections only. With 8”End Drive, specify elevation desired. NOTE : MS-7 to MS-12: Knee Braces included in price. NOTE : Knee Braces are required on incline or decline units with MS-3 or higher supports. Extra Knee Braces .... per pair ........................................1 9 . 0 0 • NOSEOVER Adjustable type. Support not included in base price. DOES NOT include bed length. Single ...................... (0° to 15°) ................................. 223.60 Double* ................... (0° to 30°) ................................. 315.80 NOTE : Brakemotor required on Incline or Decline Units greater than 10°. • OPTIONAL DRIVES Unified Drives: (Shaft Mounted) Unified Drives: 10”to 14” 16”to 20” 22”to 28” 34” End Drive 4”Drive Pulley N/C N/C N/C N/C End Drive 8”Drive Pulley 583.80 658.20 712.10 784.10 Center Drive 4”Drive Pulley 691.80 830.30 830.30 830.30 Center Drive 8”Drive Pulley 1275.60 1349.90 1543.30 1614.50 Provides 4 7/8”min. elevation 4”Drive Pulley Speed FPM 34 41 52 68 82 103 138 206 274 412 Max HP 1/2 1/2 1/2 1 1 1 1 1 1 1 8”Drive Pulley

NOTE : NOT available with Side Mounted Drive

STYLE “A”

STYLE “B”

• ELECTRICAL CONTROLS -See Electrical Controls.

• TROUGHING ATTACHMENT -See Conveyor Accessories.

• GALVANIZING -Contact Factory

Speed FPM 65 78 97 130 156 195 260 389 Max HP 1 1 1 2 2 2 2 2* *Contact Factory. Drive Type BEDWIDTHS 8" to 22" 26"

32"

End Drive (V-Belt)

161.40 161.40 161.40 95.70 127.40 127.40 243.00 315.80 315.80

NOTE : NO DEDUCT for Feeders less than minimum lengths. Shorter lengths COULD CAUSE IMPROPER BELT TRACKING. NOTE : With System End Roller Assembly Add 6” to OAL. Underside Take-Up required on Incline Units with Power Feeders and End Drives.

End Drive High Cycle (C-Face) Side Mounted End (C-Face) Side Mounted End (V-Belt)

404.50 477.10 477.10 Stacked End Drive (C-Face)** 141.80 168.40 168.40 Stacked End Drive (V-Belt)** 303.50 329.80 329.80 Center (C-Face) 691.80 830.30 830.30 Center (V-Belt) 853.40 991.70 991.70 Side Mounted Center (C-Face) 934.90 1145.90 1145.90 Side Mounted Center (V-Belt) 1096.20 1307.50 1307.50 Center w/ Ext.Take-Up C-Face 1225.50 1564.40 1564.40 Center w/ Ext. Take-Up V-Belt 1369.60 1856.50 1856.50 High Perf. Center C-Face 1536.10 1874.80 1874.80 Heavy Duty Center C-Face 1227.60 1493.90 1493.90 #50 O-Ring Drive Chain ........ Add ................................186.30 **Minimum elevation 28 1/16”with V-belt Drive, 33 1/16”with C-face drive.

CHAIN DRIVEN TYPE

BELTWIDTHS 30" Min. Length Overall 29 1/2" 29 1/2" 29 1/2" 29 1/2" 44 1/2" 44 1/2" 44 1/2" 44 1/2" 59 1/2" 71 1/2" Price 938.40 993.50 1048.40 1103.40 1278.90 1337.50 1396.10 1454.50 1853.70 2258.20 Price Per Foot 60.20 65.60 71.00 76.40 81.80 86.80 94.00 99.40 110.00 135.90 #50 O-Ring Chain on Slave Connection ......... Add .................133.20 6" 8" 10" 12" 14" 16" 18" 20" 24"

PRICELIST | 0701019