10072020_PriceList_1.1

RB

• OPTIONAL EQUIPMENT (CONTINUED)

• FLOOR SUPPORTS Not Included in Base Price. Use Chart Below for Required Elevation. "MS" SUPPORT Model No. Adjustment to Top of Belt Price Each

• UNDERSIDE TAKE-UP Provides 16”of Belt Take-Up on Long Units. BedWidths

• GUARD RAILS NOTE : Available in 5’and 10’lengths only. Contact factory for other lengths.

Price

16" to 28" 30" to 42"

489.60 583.70 1217.70

*MS-1 *MS-1.2 *MS-1.4 *MS-2

13 7/8" to 15 5/8" 14 7/8" to 16 5/8" 15 7/8" to 17 5/8" 16 7/8" to 19 7/8" 19 1/2" to 22 1/2" 22 1/2" to 28 1/2" 26 1/2" to 32 1/2" 30 1/2" to 42 1/2" 40 1/2" to 52 1/2" 52 1/2" to 64 1/2" 64 1/2" to 76 1/2" 76 1/2" to 88 1/2" 86 1/2" to 98 1/2" 98 1/2" to 110 1/2"

38.30 38.30 38.30 39.50 43.50 50.10 52.30 57.70 85.20 97.30

48"

Adjustable Universal Channel Guard Rail Both Sides................ per foot............................................9.90 One Side................... per foot............................................5.00

54”to 60" 1435.60 Required on units over 100’. Contact Factory with Application. • CONSTANT AND VARIABLE SPEEDS Constant C-Face–Within 17-135 FPM...................................... ...............................................................................No Charge Constant V-Belt–Minimum of 4 FPM....................................... ........................................................Use V-Belt Drive Add-On Constant Speeds Below Those Listed Above............................. .......................................................................Contact Factory Variable Speed............................See AC Variable Speed Drives • DRIVE COMPONENT DEDUCTS Less Motor Drive, Motor Mount and Guards, but with Shaft Extension.........Deduct................................................ 504.80 Less Motor Only (1/2 HP-208/230/460/575V-3 Ph.-60 Hz.)....... ............................... Deduct.........................................187.80 Less Reducer*.......... Deduct.........................................223.50 *Less V-Belt Guard, Chain Guard, sheaves and sprockets when V-Belt drive is supplied. Less chain guard and sprockets when C-Face drive is supplied. • LARGER TAIL PULLEY 6” dia. Tail Pulley in place of 4” dia. when not furnished as standard.......................................................................235.90

MS-3 MS-4 MS-5 MS-6 MS-7 MS-8 MS-9

Angle Type Type“A”or“B”available (Specify). Prices are for Both Sides.

106.60 121.50 134.40 140.60

Type“A” 1 1/2”x 1 1/2”x 12 Ga....per foot...........................................5.00

MS-10 MS-11 MS-12

Type“B” 1 1/2”x 1 1/2”x 12 Ga.....per foot..........................................5.00

* Less than 17 3/4”top of belt elevation– Side Mounted Center Drive Required (With 8”dia. Drive Pulley).

Fixed Channel Type Prices are for Both Sides.

NOTE : MS-7 to MS-12: Knee Braces included in price.

3 1/2”x 1 1/2”x 12 Ga.....per foot........................................14.90 6 1/2”x 1 1/2”x 12 Ga.....per foot........................................17.70 10”x 1 1/2”x 12 Ga...........per foot....................................25.00 13”x 1 1/2”x 12 Ga...........per foot....................................30.20

Extra Knee Braces ....... per pair.......................................19.00

• CASTERS -See Casters

• BAG FLATTENER

• CEILING HANGERS -See Ceiling Hangers

Mounting Assembly Only 16 in. - 28 in. OAW.......................................................1651.50 30 in. - 42 in. OAW.......................................................2343.10 Above 42 in. OAW.............................................Contact Factory NOTE : Roller Bed Only. Upper and lower bed sections priced separately. Top unit: 5’bed RB with 4”dia. drive and tail pulley with round ends. (Price as standard RB.) Lower unit: 10’ bed RB.

• POLY-TIER SUPPORTS -See Poly-Tier Support Pricing.

• OPTIONAL DRIVES Unified Drives: (Shaft Mounted) Unified Drives:

16”to 28” 30”to 42” 48” 54”to 58” Center Drive 8”Drive Pulley with 075 Reducer 177.40 177.40 177.40 177.40 Center Drive 8”Drive Pulley with 090 Reducer 301.00 301.00 301.00 301.00 8”Drive Pulley

• ELECTRICAL CONTROLS -See Electrical Controls.

Speed FPM 65 78 97 130 156 195 260 389 Max HP 1 1,2* 1 2 2 2 2 2** * Reducer size increases with 2 HP. **Contact Factory. Drive Type Low Elevation Side Mounted Center (C-Face) Low Elevation Side Mounted Center (V-Belt) Center Drive with Extended Take-Up C-Face Center Drive with Extended Take-Up V-Belt High Performance Center Drive (C-Face) Heavy Duty Center Drive (C-Face) Side Mounted End C-FaceWith Underside Take-Up Side Mounted End V-Belt With Underside Take-Up NOTE: Underside Take-Up Required on lengths longer than 22”-0’with End Drive. #50 O-Ring Drive Chain..........Add.................................186.30 #60 O-Ring Drive Chain..........Add.................................266.00 Center Drive (V-Belt) End Drive (C-Face) End Drive (V-Belt)

• GALVANIZING -Contact Factory

OVERALL FRAMEWIDTH

16" to 28"

30" to 42"

48"

54”to 60"

161.40 250.30 411.60 127.40 288.70 499.20 241.40 161.40 177.40 337.10 N/C

161.40 325.20 486.50 191.00 352.40 611.40 258.30 161.40 198.70 346.00 N/C

161.40 401.90 563.30 254.60 415.90 703.10 337.00 161.40 204.00 354.80 N/C

161.40 401.90 563.30 254.60 415.90 703.10 337.00 161.40 204.00 354.80 N/C

PRICELIST | 06182019