10072020_PriceList_1.1

SL

Conveyor shown with optional floor supports

Heavy Duty Horizontal Slat Conveyor

PRICES FOR COMPLETE CONVEYOR INCLUDE: • Steel Slat Bed in 17” Deep x 10 Ga. Formed Steel Channel Frame • “C” Face Speed Reducer–Sealed Worm Gear • 2 HP–230/460V–3 Ph.–60 Hz. “C” Face Premium Energy Efficient Motor (Specify Exact Voltage) and VSC AC Variable Speed Controller with Soft Start Capability (not mounted or wired).

• Totally Enclosed Chain Guard • 3-30 FPM Variable Conveying Speed (Speeds Other Than 30 FPM, contact Factory) • Less Supports

Slat Width

28” 33”

31" 36"

37" 42"

43" 48"

49" 54"

Overall BedWidth

9'-0" OAL

12616

12688

12833

12978

13123

Per Foot Price

341

351

372

392

413

• OPTIONAL EQUIPMENT

• NON-ADJUSTABLE FLOOR SUPPORTS DRIVE SUPPORTS

IMPORTANT NOTES

INTERMEDIATE /TAIL SUPPORTS NON-ADJUSTABLE ELEVATION

NON-ADJUSTABLE ELEVATION

• MINIMUM OVERALL LENGTH Including Drive & Tail is 9 ft.

Model No.

Adjustment to Top of Slat

Price Each 63.30 65.70 68.20 70.60 73.00 75.30 77.70 80.10 82.50 84.80 87.30 89.60 92.00 92.60 96.80 99.40

Model No. SLS-25 SLS-26 SLS-27 SLS-28 SLS-29 SLS-30 SLS-31 SLS-32 SLS-33 SLS-34 SLS-35 SLS-36 SLS-37 SLS-38 SLS-39 SLS-40 SLS-41 SLS-42

Adjustment to Top of Slat

Price Each 63.30 65.70 68.20 70.60 73.00 75.30 77.70 80.10 82.50 84.80 87.30 89.60 92.00 92.60 96.80 99.40

SLSD-25 SLSD-26 SLSD-27 SLSD-28 SLSD-29 SLSD-30 SLSD-31 SLSD-32 SLSD-33 SLSD-34 SLSD-35 SLSD-36 SLSD-37 SLSD-38 SLSD-39 SLSD-40 SLSD-41 SLSD-42

25" 26" 27" 28" 29" 30" 31" 32" 33" 34" 35" 36" 37" 38" 39" 40" 41" 42"

25" 26" 27" 28" 29" 30" 31" 32" 33" 34" 35" 36" 37" 38" 39" 40" 41" 42"

• LENGTHS OVER 79 FT.

Contact factory for lead time.

• OTHER WIDTHS For “IN-BETWEEN WIDTHS”, use next width plus 10%. For widths over 54”OAW, contact factory for lead time.

• NON-STANDARD WIDTHS Contact factory for lead time.

• INTERMEDIATE BEDS Use per foot price of width x required length, supports not included. • FLOOR SUPPORTS Floor Supports are not included in base price.There are two (2) stationary floor supports required for the first bed section and one (1) support required per bed section thereafter.

101.60 104.20

101.60 104.20

• MOTORS 3 HP-208/230/460/575 V-3 Ph.-60 Hz. motor, controller, and reducer in place of standard ............................... Add-on......................................2332.60

• DRIVE COMPONENT DEDUCTS Less Complete Drive, but with Drive Shaft Extension and Sprocket ................................ Deduct.......................................2680.60 Less Motor and Controller Only................................................. ................................ Deduct.......................................1534.00 Less Controller Only.................................................................. ................................ Deduct.......................................1003.20 Mount andWire Controller....................................................... ................................ Add-on........................................246.10

NOTE : IF SUPPLIED LESS CONTROLLER, CUSTOMER TO SUPPLY SOFT START MECHANISM AND ASSUME RESPONSIBILITY FOR APPLICATION.

PRICELIST | 01022019