10072020_PriceList_1.1

PSB & PSBC

• OPTIONAL EQUIPMENT (CONTINUED)

• MOTORS Extra Motor Price for OTHER THAN: 1/2 HP–208/230/460/575 V–3 Ph.–60 Hz.–Totally Enclosed. Speed affects horsepower requirements.

TOTALLY ENCLOSED

PREMIUM ENERGY EFFICIENT

BRAKE MOTORS

Holding 208/230/ 460/575 V 3 Ph.- 60 Hz.

200 / 208 / 230 / 460 / 575 V 3 Ph. - 60 Hz.

Cycling 208/230/460 3 Ph.- 60 Hz.

Cycling 575 V 3 Ph.- 60 Hz.

Cycling 208/230/460 3 Ph.- 60 Hz.

Cycling 575 V 3 Ph.- 60 Hz.

Holding 115/230 V 1 Ph.- 60 Hz.

H.P. REQ

115 / 230 V 1 Ph.- 60 Hz.

230/460 V 3 Ph.- 60 Hz.

575 V 3 Ph.- 60 Hz.

1/2

N/C N/A N/A

25.70 93.80

262.60 326.30 636.90

262.60 326.30 636.90

N/A

N/A

N/A

N/A

N/A

N/A

1 2

688.70 1074.20

1238.90* 1586.30*

1238.90* 1586.30*

2390.00** 2554.80**

2390.00**

798.80

790.60

2554.80** 2066.60

* NOTE : "Cycling Brakemotors" are used for indexing and are rated for 30 cycles per minute. Add-On Prices Include 5AC Reducer, Heavy Duty Motor Base Plate, and #60 Chain and Sprockets with Taper Bushed Hubs. ** NOTE : "Cycling Brakemotor" Add-On Prices Include 5AC Reducer, Heavy Duty Motor Base Plate and Timing Belt Drive. NOTE : Holding Brake Motors are NOT rated for cycling. • FLOOR SUPPORTS (PSB & PSBC) Not Included in Base Price. Use Chart Below for Required Elevation. "MS" SUPPORT Model No. Adjustment to Top of Belt Price Each • OPTIONAL DRIVES (PSB) Drive Type Over All BedWidth 12" - 20" 22" - 30" 32" - 42" End Drive (V-Belt) 161.40 161.40 161.40

• GUARD RAILS (PSBC ONLY) Adjustable Universal Channel Guard Rail 45º and 90º

Both Sides.....................................................................147.00 Outside Only....................................................................99.10 Inside Only......................................................................65.20 180º Both Sides.....................................................................294.10 Outside Only..................................................................198.00 Inside Only....................................................................130.30

Side Mounted (C-Face) Side Mounted (V-Belt)

MSL-1* MSL-2* MSL-3* MS-1* MS-1.2* MS-1.4*

9 3/4" to 10 3/4" 10 3/4" to 12 1/2" 12 1/2" to 15 1/8" 14 3/4" to 16 1/2" 15 3/4" to 17 1/2" 16 3/4" to 18 1/2" 17 3/4" to 20 3/4" 20 3/8" to 23 3/8" 23 3/8" to 29 3/8" 27 3/8" to 33 3/8" 31 3/8" to 43 3/8" 41 3/8" to 53 3/8" 53 3/8" to 65 3/8" 65 3/8" to 77 3/8" 77 3/8" to 89 3/8" 87 3/8" to 99 3/8" 99 3/8" to 111 3/8"

38.30 38.30 38.30 38.30 38.30 38.30 39.50 43.50 50.10 52.30 57.70 85.20 97.30

243.10

280.20

315.80

404.50

441.60

477.10

Center (C-Face) Center (V-Belt) Overhead (C-Face) Overhead (V-Belt)

886.90 1108.60 1330.50

MS-2 MS-3 MS-4 MS-5 MS-6 MS-7 MS-8 MS-9

1048.30 1269.90 1491.90

Type“A” 1 1/2”x 1 1/2”x 12 Ga. 45º and 90º

361.90

411.60

461.30

523.30

573.00

622.60

Both Sides.......................................................................60.10 Outside Only ...................................................................37.20 Inside Only......................................................................22.10 180º Both Sides.....................................................................119.00 Outside Only ...................................................................74.40 Inside Only......................................................................44.30

106.60 121.50 134.40 140.60

MS-10 MS-11 MS-12

#50 O-Ring Drive Chain........Add..................................186.30

• CONSTANT AND VARIABLE SPEEDS Constant C-Face–Within 15-70 FPM........................No Charge Constant V-Belt–Minimum of 4 FPM....................................... .........................................................Use V-Belt Drive Add-On • DRIVE COMPONENT DEDUCTS Less Motor Drive, Motor Mount and Guards, but with Shaft Extension and Sprocket.......Deduct............................ 504.80 Less Motor Only (1/2 HP-208/230/460/575 V-3 Ph.-60 Hz.)...... ...........................................Deduct.............................187.80 Less Reducer*......................Deduct.............................223.50 *Less V-Belt Guard, Chain Guard, sheaves and sprockets when V-Belt drive is supplied. Less chain guard and sprockets when C-Face drive is supplied. • CENTER BEARING SUPPORT (END DRIVE) (Drive and Tail) ..................Add On.............................442.90

* Less than 19 15/16”top of belt elevation– .

Side Mounted Drive Required.

NOTE : MS-7 to MS-12: Knee Braces included in price. Extra Knee Braces ....... per pair.......................................19.00 Single Center Leg (MSC-6 and below) each................... 39.50 Single Center Leg (MSC-7 and above) each.................... 49.20

Type“B” 1 1/2”x 1 1/2”x 12 Ga.3 1/2”x 1 1/2”x 12 Ga 45º and 90º

• CEILING HANGERS- See Ceiling Hangers

Both Sides.......................................................................89.80 Outside Only ...................................................................57.00 Inside Only......................................................................33.10 180º Both Sides.....................................................................180.10 Outside Only .................................................................113.80 Inside Only......................................................................65.90

• POLY-TIER SUPPORTS- See Poly-Tier Support Pricing

• GUARD RAILS* Adjustable Universal Channel Guard Rail

Both Sides......................................... per foot...................9.90 One Side............................................ per foot...................5.00

Angle Type Types“A”or“B”available (specify). Prices are for both sides.

• ELECTRICAL CONTROLS- See Electrical Controls.

Fixed Channel Type 3 1/2”x 1 1/2”x 12 Ga. 45º and 90º

• GALVANIZING (PSB ONLY)- Contact Factory

Type“A” 1 1/2”x 1 1/2”x 12 Ga............................ per foot...................5.00 Type“B”(See NOTE ) 1 1/2”x 1 1/2”x 12 Ga............................ per foot...................5.00 Fixed Channel Type (Prices are for both sides.) 3 1/2”x 1 1/2”x 12 Ga............................ per foot.................14.80

Both Sides.....................................................................143.50 Outside Only ...................................................................90.60 Inside Only......................................................................53.60 180º Both Sides.....................................................................286.80 Outside Only .................................................................180.80 Inside Only....................................................................107.30

* NOTE : If product comes in contact with guard rails, product flow will be affected.

PRICELIST | 01022019