10072020_PriceList_1.1

PLEZD

• OPTIONAL EQUIPMENT

IMPORTANT NOTES

• FLOOR SUPPORTS Floor Supports are not included in base price. There are two (2) stationary floor supports required for the first bed section and one (1) support required per bed section thereafter.

• OTHER LENGTHS For fractional lengths, round up to nearest foot. Use per foot price of width x OAL + zone price x total number of zones, plus base price. For zone lengths less than 30”, contact factory for lead time. • OTHER WIDTHS For“IN-BETWEENWIDTHS”, use next width plus 10%. For widths wider than 76”OAW, contact factory for lead time. All non-standard widths contact factory for lead time.

NOTE : Longer zones may require an additional floor support depending on product load.

• CONSTANT AND VARIABLE SPEEDS Constant Speed—38 FPM

• EZLOGIC®- See EZLogic® Component Page

• FLOOR SUPPORTS Not Included in Base Price. Use Chart Below for Required Elevation. "HS" SUPPORT Model No. Adjustment to Top of Belt Price Up To 73 1/4”OAW

• GALVANIZING- Contact Factory

• DRIVE COMPONENT DEDUCTS Less Gearmotor Only (1/2 HP-230/460V-3 Ph.-60 Hz.).........(Per Zone)........................ Deduct................ ........................304.90 • EZDRIVETM SYSTEM Variable Frequency*.............Add PerZone ....................642.90 (*FOR LONGER THAN 60”ZONES, ADD“LONGER ZONE”PRICING LISTED BELOW.) • LONGER ZONES 64”- 90” 3’-0”Connector Cable ...........................................Add Per Zone....................201.10 100”- 120” 6’-0”Connector Cable ...........................................Add Per Zone....................201.10

Price Above 74 1/4”OAW

HSL-05 HS-01 HS-02

13" to 14 1/8" 14 1/8" to 15 5/8" 15 5/8" to 18 5/8"

61.10 61.10 61.50 82.40 84.30 87.20 98.40 124.40 138.80 170.40 182.50 213.70 225.10

61.10 61.10 82.40 89.30 94.90 97.60 108.70 149.00 163.10 207.20 218.60 262.60 273.90

HS-03* 18 5/8" to 21 5/8" HS-04* 21 5/8" to 24 5/8" HS-05* 24 5/8" to 27 5/8" HS-06* 27 5/8" to 33 5/8" HS-07* 33 5/8" to 39 5/8" HS-08* 39 5/8" to 51 5/8" HS-09* 51 5/8" to 63 5/8" HS-10* 63 5/8" to 75 5/8" HS-11* 75 5/8" to 87 5/8" HS-12* 87 5/8" to 99 5/8"

*Knee Braces (Included in support price) Extra Knee Braces..........................Add Per Pair.............. 46.20

• LONGER ZONES - 575 VOLT

• GEAR MOTORS Motor Price for OTHER THAN 1/2 HP-230/460V– 3 Ph.–60 Hz. (Add per zone.) H.P. REQ. TOTALLY ENCLOSED 230 / 460 V 3 Ph.- 60 Hz. 1/2 N/C 3/4 467.40 1 554.30 1 1/2 590.40

30”- 60”................... Add Per Zone................................397.50

64”- 90” 3’-0”Connector Cable ...........................................Add Per Zone....................598.40 100”- 120” 6’-0”Connector Cable ...........................................Add Per Zone....................598.40

GEAR BOX SIZE 63

GEAR BOX SIZE 90

LOAD PER ZONE

500 LBS.

1000 LBS.

1500 LBS.

2000 LBS.

MOTOR HP

1/2 HP GEARMOTOR CONTROLLER VOLTAGE

3/4 HP GEARMOTOR CONTROLLER VOLTAGE

1 HP GEARMOTOR

1 1/2 HP GEARMOTOR CONTROLLER VOLTAGE

CONTROLLER VOLTAGE

DISCONNECT PANEL

230 V

460 V

230 V

460 V

230 V

460 V

230 V

460 V

SINGLE CONTROL DUAL CONTROL

1-5 ZONES 6-10 ZONES

1-10 ZONES 11-20 ZONES

1-3 ZONES 4-6 ZONES

1-6 ZONES 7-12 ZONES

1-2 ZONES 3-4 ZONES

1-4 ZONES 5-10 ZONES

1-2 ZONES 3-4 ZONES

1-4 ZONES 5-8 ZONES

PRICELIST | 01022019

Made with FlippingBook Ebook Creator