10072020_PriceList_1.1
26-CRR
• FLOOR SUPPORTS Not Included in Base Price. Use Chart Below for Required Elevation. "HSN" SUPPORT Model No. Adjustment to Top of Roller Price Up To 73 1/4”OAW • OPTIONAL EQUIPMENT
• CONSTANT AND VARIABLE SPEEDS Constant C-Face–Within 16-75 FPM.....
• CHAIN CROSSOVER Off-Set Style“C”or“D”...................................................665.20
....................... (#60 Chain).....................................No Charge Constant C-Face–Within 14-75 FPM........................................ (#40 and #50 Chain)...............................................No Charge Constant V-Belt–Within 4-12 FPM.........UseV-BeltDriveAdd-On • DRIVE COMPONENT DEDUCTS Less Complete Motor Drive and Drive Shell (For Slave Driving)...............................Deduct.............................714.10 Less Motor Only (1 HP-208/230/460/575 V-3 Ph.-60 Hz.)......................................Deduct.............................205.50 Less Reducer* (4A or 4AC) Deduct................................223.50 *Less V-Belt Guard, Chain Guard, sheaves and sprockets when V-Belt drive is supplied. Less chain guard and sprockets when C-Face drive is supplied. • OPTIONAL FRAME 6”x 1 5/8”x 4 Ga. Formed Channel Set Low............................... ...........................................add on per foot.................... 3.70 4”x 5.4 lbs. Structural Channel (Welded)................................. ...........................................add on per foot.....................8.90 5”x 6.7 lbs. Structural Channel Set Low (Welded)................... ...........................................add on per foot...................11.30 6”x 8.2 lbs. Structural Channel Set Low (Welded)................... ...........................................add on per foot...................21.30 Note: 4, 5, and 6”Roller Center only
Price Above 74 1/4”OAW
HSN-1** 10 1/2" to 12"
61.10 61.50 82.40 84.30 87.00 98.40 124.40 138.60 170.50 182.50 213.70 225.10
61.10 61.50 89.30 94.90 97.60 108.90 148.90 163.10 207.00 218.60 262.60 273.90
HSN-2** HSN-3** HSN-4* HSN-5* HSN-6* HSN-7* HSN-8* HSN-9* HSN-10* HSN-11* HSN-12*
12”to 15” 15" to 18" 18" to 21" 21" to 24" 24" to 30" 30" to 36" 36" to 48" 48" to 60" 60" to 72" 72" to 84" 84" to 96"
Style“C”
* Knee Braces (Included in support price) Extra Braces.............. Add per pair...................................46.20 **Less than 18 1/2”top of roller elevation– . Top Side Mounted Drive Required. 6 1/8”Min Elevation • OPTIONAL DRIVES
OVERALLWIDTHS
22 1/4" to 34 1/4"
36 1/4" to 54 1/4"
Drive Type
58 1/4" to 70 1/4"
Top Side Mounted C-Face Top Side Mounted V-Belt
338.70
408.00
477.10
• HEAVY DUTY END STOP (SET HIGH ONLY) 6”x 8.2 lbs. structural channel
Style“D”
500.20
569.30
638.60
• GUARD RAILS Angle Type“A” 2”x 1 5/8”x 1/4” Side Opposite Chain Guard................ per foot...................7.40
19”- 43”BR.....................................................................65.60 45”- 67”BR.....................................................................96.00
#50 O-Ring Drive Chain........Add..................................186.30 #60 O-Ring Drive Chain........Add..................................266.00 Under 5’-0”OAL use Short Top Side Mounted or V-Belt Drive. 3’-0”and under use V-Belt Drive ONLY. • OPTIONAL ROLLERS Use the following Add-On prices for optional roller centers and bearings. Regreasable Bearings with Grease Fittings 3”Roller Centers........................Add-on per foot.............85.90 3 3/4”Roller Centers....................Add-on per foot.............68.80 4”Roller Centers........................Add-on per foot.............64.40 5”Roller Centers........................Add-on per foot.............51.60 6”Roller Centers........................Add-on per foot.............43.00 7 1/2”Roller Centers....................Add-on per foot.............34.30
• HEAVY DUTY END STOP (SET LOW ONLY) 7”x 9.8 lbs. structural channel
• ELECTRICAL CONTROLS- See Electrical Controls.
19”- 43”BR.....................................................................96.00 45”- 67”BR...................................................................145.80
• GALVANIZING- Contact Factory
• ANGLE END STOP 2”x 2”x 4 Ga.
19”- 23”BR.....................................................................39.50 25”- 39”BR.....................................................................63.90 43”- 67”BR.....................................................................79.40
2 5/8”x .219Wall with 013.1059 Heavy Duty Bearings Conveying Surface 15 3/4" 17 3/4" 19 3/4" 21 3/4" 23 3/4" 27 3/4" 29 3/4" 33 3/4" 35 3/4" 39 3/4" 43 3/4" 47 3/4" 51 3/4" 57 3/4" 63 3/4" 3" Centers Add On Per Foot 255.80 263.70 271.10 278.60 286.00 301.20 308.70 319.20 331.10 346.20 361.20 376.40 391.40 413.80 434.30 3 3/4" Centers Add On Per Foot 204.60 210.80 216.80 222.80 228.90 240.90 246.90 257.20 264.80 277.00 289.00 301.10 313.10 331.00 348.10 4" Centers Add On Per Foot 191.90 197.60 203.40 208.00 214.60 225.90 231.60 241.00 248.20 259.70 270.90 282.30 293.50 310.20 325.70 5" Centers Add On Per Foot 153.70 158.10 162.70 167.10 171.60 180.70 185.10 192.90 198.60 207.80 216.60 225.90 234.80 248.20 260.60 6" Centers Add On Per Foot 127.80 131.90 135.50 139.30 143.00 150.50 154.30 160.60 165.60 173.20 180.60 188.20 195.60 206.80 217.00 7 1/2" Centers Add On Per Foot 102.40 105.50 108.50 111.40 114.30 120.50 123.50 128.50 132.50 138.50 144.50 150.50 156.60 165.60 173.70
PRICELIST | 04012019
Made with FlippingBook Ebook Creator