10072020_PriceList_1.1

199-CREZD

• OPTIONAL EQUIPMENT

IMPORTANT NOTES

• OTHER LENGTHS For lengths shorter than 5’-0” price as 5’-0” OAL. For fractional lengths, round up to nearest foot. Use per foot price of width x OAL + zone price x total number of zones, plus base price. NOTE : OAL must be divisible by zone length. Zone length must be divisible by roller centers. • OTHER WIDTHS For “IN-BETWEEN WIDTHS”, use next width plus 10%. For widths above 42” OAW and up to 63”OAW, interpolate plus 10%. For widths above 63”OAW, contact factory for lead time. All non-standard widths contact factory for lead time.

• FLOOR SUPPORTS Floor Supports are not included in base price. There are two (2) stationary floor supports required for the first bed section and one (1) support required per bed section thereafter.

NOTE : Longer zones may require an additional floor support depending on product load.

• CONSTANT AND VARIABLE SPEEDS Constant Speed—35 or 58 FPM. For other speeds, contact factory for lead time. • DRIVE COMPONENT DEDUCTS Less Gearmotor Only (1/3 HP-230/460V-3 Ph.-60 Hz.) Per Zone................... Deduct........................................ 304.90

• EZDRIVE TM SYSTEM Variable Frequency*.............Add PerZone ....................633.20 (*FOR LONGER THAN 60”ZONES, ADD“LONGER ZONE”PRICING LISTED BELOW.) • LONGER ZONES - 230/460 VOLT 64”- 90” 3’-0”Connector Cable ...........................................Add Per Zone....................201.10 100”- 120” 6’-0”Connector Cable ...........................................Add Per Zone....................201.10

• FLOOR SUPPORTS Not Included in Base Price. Use Chart Below for Required Elevation. "MSN" SUPPORT Model No. Adjustment to Top of Roller

Price Each 38.30 38.30 38.30 39.50 43.50 50.10 52.30 57.70 85.20 97.30

MSN-1 MSN-1.2 MSN-1.4 MSN-2 MSN-3 MSN-4 MSN-5 MSN-6 MSN-7 MSN-8 MSN-9 MSN-10 MSN-11 MSN-12

10 3/4" to 12 1/2" 11 3/4" to 13 1/2" 12 3/4" to 14 1/2" 13 3/4" to 16 3/4" 16 11/16" to 19 11/16" 19 11/16" to 25 11/16" 23 11/16" to 29 11/16" 27 11/16" to 39 11/16" 37 11/16" to 49 11/16" 49 11/16" to 61 11/16" 61 11/16" to 73 11/16" 73 11/16" to 85 11/16" 83 11/16" to 95 11/16" 95 11/16" to 107 11/16"

• LONGER ZONES - 575 VOLT

106.60 121.50 134.40

30”- 60”................... Add Per Zone................................397.50

140.60 NOTE : MSN-7 to MSN-12: Knee Braces included in price.

64”- 90” 3’-0”Connector Cable ...........................................Add Per Zone....................598.40 100”- 120” 6’-0”Connector Cable ...........................................Add Per Zone....................598.40

Extra Knee Braces ....... per pair...................................... 19.00

• CEILING HANGERS- See Ceiling Hangers

• EZLOGIC®- See EZLogic® Component Page

• POLY-TIER SUPPORTS- See Poly-Tier Support Pricing

• DIFFUSE ZONE CONTROLLERS Add Per Zone..................................................................19.10

• GUARD RAILS Angle Type“A”

1 1/2”x 1 1/2”x 12 Ga. One Side................... per foot............................................2.50

Fixed Channel Type 3 1/2”x 1 1/2”x 12 Ga. (Opposite Chain Guard) One Side................... per foot........................................... 7.30

• GALVANIZING- Contact Factory

PRICELIST | 01022019