10072020_PriceList_1.1

25-CREZD

• OPTIONAL EQUIPMENT

IMPORTANT NOTES

• OTHER LENGTHS For lengths shorter than 5’-0”price as 5’-0”OAL. For fractional lengths, round up to nearest foot. Use per foot price of width x OAL + zone price x total number of zones, plus base price. NOTE : OAL must be divisible by zone length. Zone length must be divisible by roller centers. • OTHER WIDTHS For“IN-BETWEENWIDTHS”, use next width plus 10%. For widths wider than above and up to 74 1/4”OAW, interpolate plus 10%. For widths above 74 1/4”OAW, contact factory for lead time. All non-standard widths contact factory for lead time.

• FLOOR SUPPORTS Floor Supports are not included in base price. There are two (2) stationary floor supports required for the first bed section and one (1) support required per bed section thereafter.

NOTE : Longer zones may require an additional floor support depending on product load.

• LONGER ZONES - 575 VOLT 30”- 60”................... Add Per Zone................................397.50

• FLOOR SUPPORTS Not Included in Base Price. Use Chart Below for Required Elevation. "HSN" SUPPORT Model No. Adjustment to Top of Roller Price Up To 73 1/4”OAW

• OPTIONAL DRIVES Drive Type

OVERALL FRAMEWIDTH 34 1/4" to 70 1/4"

64”- 90” 3’-0”Connector Cable ...........................................Add Per Zone....................598.40 100”- 120” 6’-0”Connector Cable ...........................................Add Per Zone....................598.40

Underside MountedWith Hytrol Reducer

N/C

Price Above 74 1/4”OAW

• CONSTANT AND VARIABLE SPEEDS Constant Speed—22, 28, 37, 45, or 56 FPM

HSN-01 HSN-02 HSN-3* HSN-4* HSN-5* HSN-6* HSN-7* HSN-8* HSN-9* HSN-10* HSN-11* HSN-12*

10 1/2”to 12” 12" to 15" 15" to 18" 18" to 21" 21" to 24" 24" to 30" 30" to 36" 36" to 48" 48" to 60" 60" to 72" 72" to 84" 84" to 96"

61.10 61.50 82.40 84.30 87.20 98.40 124.40 138.80 170.40 182.50 213.70 225.10

61.10 61.50 89.30 94.90 97.60 108.70 149.00 163.10 207.20 218.60 262.60 273.90

• DRIVE COMPONENT DEDUCTS Less Gearmotor Only (1/2 HP-230/460V-3 Ph.-60 Hz.).......................... (Per Zone)...........Deduct............. 305.20 • EZDRIVE TM SYSTEM Variable Frequency*.............Add PerZone ....................633.20 (*FOR LONGER THAN 60”ZONES, ADD“LONGER ZONE”PRICING LISTED BELOW.) • LONGER ZONES 64”- 90” 3’-0”Connector Cable ...........................................Add Per Zone....................201.10 100”- 120” 6’-0”Connector Cable ...........................................Add Per Zone....................201.10

• EZLOGIC®- See EZLogic® Component Page

• DIFFUSE ZONE CONTROLLERS Add Per Zone..................................................................19.10 • GUARD RAILS Angle Type“A” 2”x 1 5/8”x 1/4” One Side................... Per Foot.......................................... 7.40

*Knee Braces (Included in support price) Extra Knee Braces..........................Add Per Pair.............. 46.20 • OPTIONAL FRAME 4” x 5.4 lbs. Structural Channel on Side Opposite Chain Guard and 6” x 8.2 lbs. Structural Channel on Chain Guard Side.......................................Add on Per Foot................ 18.30 • OPTIONAL ROLLERS Use the following Add-On prices for optional roller sizes and bearings.

• GALVANIZING- Contact Factory

2 5/8”Dia. x 7 Ga. Rollers (Standard Bearings) Conveying Surface

27 3/4" 29 3/4" 31 3/4" 33 3/4" 35 3/4" 37 3/4" 39 3/4" 41 3/4" 43 3/4" 45 3/4" 47 3/4" 49 3/4" 51 3/4" 53 3/4" 55 3/4" 57 3/4" 59 3/4" 61 3/4" 63 3/4" 6" Centers Add On Per Foot 21.00 22.30 23.40 25.10 26.40 27.70 29.10 30.30 31.90 33.10 34.30 35.80 37.10 38.40 39.80 41.10 42.60 43.90 44.90 5" Centers Add On Per Foot 25.40 26.90 28.20 29.90 31.90 32.80 34.80 36.00 38.10 39.00 41.20 42.30 44.30 46.20 47.90 48.50 51.00 52.50 54.30 4" Centers Add On Per Foot 31.40 33.60 35.50 37.70 39.50 41.60 43.50 45.30 47.50 49.50 51.60 53.60 55.60 57.80 59.90 61.80 63.60 65.80 67.90 3" Centers Add On Per Foot 41.90 44.60 47.10 50.00 52.90 55.60 58.00 61.00 63.40 66.20 68.80 71.60 74.10 76.80 79.60 82.60 85.10 87.90 90.50 2 1/2”Dia. x 7 Ga. Rollers with 013.1059 Heavy Duty Bearings Conveying Surface 27 3/4" 29 3/4" 31 3/4" 33 3/4" 35 3/4" 37 3/4" 39 3/4" 41 3/4" 43 3/4" 45 3/4" 47 3/4" 49 3/4" 51 3/4" 53 3/4" 55 3/4" 57 3/4" 59 3/4" 61 3/4" 63 3/4" 6" Centers Add On Per Foot 112.60 114.10 115.90 116.80 117.80 119.40 121.50 122.50 123.80 125.00 126.50 127.50 128.80 130.60 132.40 133.60 134.90 135.50 136.10 5" Centers Add On Per Foot 135.00 136.20 139.20 140.40 141.10 142.90 144.90 146.80 148.90 150.20 151.60 153.10 154.60 156.70 158.90 160.40 161.90 162.70 163.40 4" Centers Add On Per Foot 168.60 171.00 173.70 175.10 176.40 179.30 182.00 183.80 185.70 187.60 189.40 191.20 193.30 195.10 197.90 200.10 202.30 203.20 204.30 3" Centers Add On Per Foot 224.90 228.60 231.80 233.60 235.30 238.60 241.50 242.40 243.60 250.50 252.70 255.20 257.40 261.20 264.70 267.30 269.50 271.30 272.70 2 5/8”Dia. x .219Wall Rollers with 013.1059 Heavy Duty Bearings Conveying Surface 27 3/4" 29 3/4" 31 3/4" 33 3/4" 35 3/4" 37 3/4" 39 3/4" 41 3/4" 43 3/4" 45 3/4" 47 3/4" 49 3/4" 51 3/4" 53 3/4" 55 3/4" 57 3/4" 59 3/4" 613/4" 63 3/4" 6" Centers Add On Per Foot 150.50 154.50 158.10 161.70 165.50 169.30 173.20 176.60 180.60 184.50 188.40 191.80 195.60 201.30 202.30 208.70 210.80 214.00 217.10 5" Centers Add On Per Foot 180.70 185.00 189.70 194.10 198.50 203.10 207.80 213.00 216.60 221.20 225.90 230.40 235.00 238.80 243.10 247.80 252.80 256.80 260.60 4" Centers Add On Per Foot 225.90 231.50 237.10 242.60 248.20 253.90 259.60 265.30 271.00 276.40 282.20 287.70 293.50 298.80 304.90 310.50 316.10 321.80 325.70 3" Centers Add On Per Foot 301.30 307.90 316.10 323.30 330.90 338.30 346.20 353.70 361.10 368.80 376.30 384.40 391.60 398.10 404.70 413.20 421.60 427.80 435.50

PRICELIST | 01022019