10072020_PriceList_1.1
36-CREZD
• OPTIONAL EQUIPMENT
IMPORTANT NOTES
• OTHER LENGTHS For lengths shorter than 5’-0”price as 5’-0”OAL. For fractional lengths, round up to nearest foot. Use per foot price of width x OAL + zone price x total number of zones, plus base price. NOTE : OAL must be divisible by zone length. Zone length must be divisible by roller centers. • OTHER WIDTHS For“IN-BETWEENWIDTHS”, use next width plus 10%. For widths wider than 70 1/4”OAW, contact factory for lead time.
• FLOOR SUPPORTS Floor Supports are not included in base price. There are two (2) stationary floor supports required for the first bed section and one (1) support required per bed section thereafter.
NOTE : Longer zones may require an additional floor support depending on product load.
• CONSTANT AND VARIABLE SPEEDS Constant Speed—26.5 FPM
• FLOOR SUPPORTS Not Included in Base Price. Use Chart Below for Required Elevation. "HSF" SUPPORT Model No. Adjustment to Top of Roller Price Each
• EZLOGIC®- See EZLogic® Component Page
• DIFFUSE ZONE CONTROLLERS Add Per Zone..................................................................19.10
• DRIVE COMPONENT DEDUCTS Less Gearmotor Only (3/4 HP-230/460V-3 Ph.-60 Hz.).........(Per Zone)........................ Deduct................ ........................323.20 • GUARD RAILS Angle Type“A” 2”x 1 5/8”x 1/4” One Side................... Per Foot.......................................... 6.80 • EZDRIVE TM SYSTEM Variable Frequency*.............Add PerZone ....................633.20 (*FOR LONGER THAN 60”ZONES, ADD“LONGER ZONE”PRICING LISTED BELOW.) • LONGER ZONES 64”- 90” 3’-0”Connector Cable ...........................................Add Per Zone....................201.10 100”- 120” 6’-0”Connector Cable ...........................................Add Per Zone....................201.10 • LONGER ZONES - 575 VOLT 30”- 60”................... Add Per Zone................................397.50 64”- 90” 3’-0”Connector Cable ...........................................Add Per Zone....................598.40 100”- 120” 6’-0”Connector Cable ...........................................Add Per Zone....................598.40
• GALVANIZING- Contact Factory
HSF-9 HSF-10 HSF-11 HSF-12 HSF-13 HSF -14 HSF-15 HSF-16 HSF-17 HSF-18 HSF-19 HSF-20 HSF-21 HSF-22 HSF-23 HSF-24 HSF-25 HSF-26 HSF-27 HSF-28 HSF-29 HSF-30
10 1/8" 10 3/4" 11 3/4" 12 3/4" 13 3/4" 14 3/4" 15 3/4" 16 3/4" 17 3/4" 18 3/4" 19 3/4" 20 3/4" 21 3/4" 22 3/4" 23 3/4" 24 3/4" 25 3/4" 26 3/4" 27 3/4" 28 3/4" 29 3/4" 30 3/4"
86.30 88.10 89.70 91.40 93.10 94.90 96.60 98.00 99.90 101.50 103.10 105.00 106.60 108.20 110.20 126.00 127.60 129.00 130.50 132.10 132.30
134.90 Knee Braces (Included in support price) on HSF-11 through HSF-30 supports only. Extra Knee Braces..........................Add Per Pair.............. 46.20
PRICELIST | 01022019
Made with FlippingBook Ebook Creator