10072020_PriceList_1.1

TA

• OPTIONAL EQUIPMENT (CONTINUED)

• FLOOR SUPPORTS Not Included in Base Price. Use Chart Below for Required Elevation. "MS" SUPPORT Model No. Adjustment to Top of Belt Price Each *MS-1 11 1/8" to 12 7/8" 38.30 *MS-1.2 12 1/8" to 13 7/8" 38.30 *MS-1.4 13 1/8" to 14 7/8" 38.30 *MS-2 14 1/8" to 17 1/8" 39.50 **MS-3 16 3/4" to 19 3/4" 43.50 MS-4 19 3/4" to 25 3/4" 50.10 MS-5 23 3/4" to 29 3/4" 52.30 MS-6 27 3/4" to 39 3/4" 57.70 MS-7 37 3/4" to 49 3/4" 85.20 MS-8 49 3/4" to 61 3/4" 97.30 MS-9 61 3/4" to 73 3/4" 106.60 MS-10 73 3/4" to 85 3/4" 121.50 MS-11 83 3/4" to 95 3/4" 134.40 MS-12 95 3/4" to 107 3/4" 140.60 * Less than 16”top of roller elevation – Shaft Mounted Drive or Side Mounted Drive required. **Less than 19 1/2”top of belt elevation–Side Mounted Drive Required (With 8”dia. Drive Pulley). NOTE : MS-7 to MS-12: Knee Braces included in price. NOTE : Knee Braces are required on incline or decline units with MS-3 or higher supports. Extra Knee Braces .... per pair........................................ 19.00 • NOSEOVER Adjustable type. Support not included in base price. DOES NOT include bed length. Single ...................... (0° to 15°) ..................................223.60 Double* ................... (0° to 30°) ................................. 315.80 * Standard location is 2’2”from discharge end Contact factory for other locations. NOTE : Brakemotor required on Incline or Decline Units greater than 10°. • OPTIONAL DRIVES Unified Drives: (Shaft Mounted) Unified Drives: 10”to 14” 16”to 20” 22”to 28” 30”to 34” End Drive 4”Drive Pulley N/C N/C N/C N/C End Drive 8”Drive Pulley 583.80 658.20 712.10 784.10 Center Drive 4”Drive Pulley 691.80 830.30 830.30 830.30 Center Drive 8”Drive Pulley 1275.60 1349.90 1543.30 1614.50 Provides 4 7/8”min. elevation 4”Drive Pulley Speed FPM 34 41 52 68 82 103 138 206 274 412 Max HP 1/2 1/2 1/2 1 1 1 1 1 1 1 8”Drive Pulley NOTE : MS Support adjustment is for 4”drive, intermediate, and tail sections only. With 8”End Drive, specify elevation desired.

• CASTERS -See Casters • CEILING HANGERS -See Ceiling Hangers • POLY-TIER SUPPORTS -See Poly-Tier Support Pricing. • UNDERSIDE TAKE-UP Provides 16”of Belt Take-Up on Long Units. Required on Incline Units with Powered Feeders and End Drives. BedWidths Price 10" to 18" 489.60 20" to 24" 535.70 28" 583.70 • OUTRIGGED UNDERSIDE TAKE-UP Provides 16”of Belt Take-Up on Long Units. Required on Incline Units with Powered Feeders and End Drives. BedWidths Price 10" to 18" 489.60 20" to 24" 535.70 28" 583.70 • CONSTANT AND VARIABLE SPEEDS Constant C-Face–Within 17-135 FPM ..................................... ............................... End Drive Only ...................... No Charge Constant V-Belt–Minimum of 3.5 FPM ................................... .............................................. When a 2 HP motor is required, 8 FPM is minimum speed, and a V-Belt Drive is required. ............................... Use V-Belt Drive Add-On Constant Speeds Below Those Listed Above ........................... ...................................................................... Contact Factory Variable Speed .......................... See AC Variable Speed Drives • DRIVE COMPONENT DEDUCTS Less Motor Drive, Motor Mount and Guards, but with Shaft Extension ................ Deduct ...................................... 504.80 Less Motor Only ( HP-208/230/460/575V-3 Ph.-60 Hz.) ...... .............................. Deduct ........................................187.80 Less Reducer* ............................. Deduct ................... 223.50 *Less V-Belt Guard, Chain Guard, sheaves and sprockets when V-Belt drive is supplied. Less chain guard and sprockets when C-Face drive is supplied. • LARGER DRIVE OR TAIL PULLEY • POWERED FEEDER Prices for Powered Feeder Include Black Ultimate 140 BBS Belt, Bed, Drive & Tail Pulleys NOTE : Adjustable Floor Supports Not Included In Base Price NOTE : Overall length of 29 1/2” requires 1 support. Overall length of 44 1/2”or more requires 2 supports. Gravity Conveyor Bracket with “Pop-Out” Roller on Tail End (Through 24”Wide Belt Only) NOTE : NO DEDUCT for Feeders less than minimum lengths. Shorter lengths COULD CAUSE IMPROPER BELT TRACKING. NOTE : With System End Roller Assembly Add 6” to OAL. Underside Take-Up required on Incline Units with Power Feeders and End Drives. CHAIN DRIVEN TYPE BELTWIDTHS 6" 8" 10" 12" 14" BedWidths 8" Dia. Drive Pulley in Lieu of 4" Dia. 6" Dia. Tail Pulley in Lieu of 4" Dia. 10" 12" 14" 16" 18" 20" 22" 24" 28" 406.30 480.80 534.60 606.60 235.90 30”34” 235.90

• COUPLING HARDWARE Gravity Conveyor Bracket w/ Pop-Out Roller* ......................... ................................ per end ........................................ 57.00 Butt Couplings with Pop-Out Roller ........................................ ................................ per end ........................................ 53.00 System End Roller Assembly** ............................................... ................................ per end ...................................... 146.10 Nose Roller Assembly - 1 1/8”Dia .............................................. ................................ per end ...................................... 363.90 NOTE : Center drive required if nose rollers used on each end Tail Pulley - 2 1/4”Dia ................................................................ ................................ per end ...................................... 138.40 *Through 24”Wide Belt Only. **NOTE : Belt is 2”less than standard. When System End is supplied on both ends, Center Drive is required. See“Optional Drive Chart”for Center Drive Price. • GUARD RAILS NOTE : Available in 5’and 10’lengths only. Contact factory for other lengths. Adjustable Universal Channel Guard Rail Both Sides ............... per foot ......................................... 9.90 One Side .................. per foot ......................................... 5.00 HEIGHT (Both Sides-Per Foot) TYPE Solid Side PC Style 2" 20.50 N/A 3 1/2" N/A 21.20 4" 21.10 N/A 6" 22.70 22.70 9" 26.40 26.40 12" 29.40 29.40 (PC Type Guards Only - 5 ft. and 10 ft. Lengths available two weeks from factory. Other Lengths available. Contact factory for lead time.) NOTE : Solid Side Guards mount vertically on outside of conveyor bed, PC Type Guards mount on top of bed. • FILLER PLATES For Solid Side Guards (NOT AVAILABLE on 2”High Guards) ...... ................................ per joint ...................................... 47.30 • ELECTRICAL CONTROLS -See Electrical Controls. • TROUGHING ATTACHMENT -See Conveyor Accessories. • SIDE TABLES —Bed Lengths Only (5 ft. and 10 ft. Lengths available 2 weeks from factory. Other Lengths available. Contact factory for lead time.) NOTE : When ordering, specify if for One or Both Sides, and R.H. or L.H. Side. See chart below. TableWidth Width From Belt Per Foot-Per Side Price 10" 12" 17.70 16" 18" 22.40 22" 24" 34.20 • GALVANIZING -Contact Factory

Speed FPM 65 78 97 130 156 195 260 389 Max HP 1 1 1 2 2 2 2 2* *Contact Factory. Drive Type BEDWIDTHS

10" to 24" 28" 30" to 34” 161.40 161.40 161.40 95.70 127.40 127.40 243.00 315.80 315.80

End Drive (V-Belt)

End Drive High Cycle (C-Face) Side Mounted End (C-Face) Side Mounted End (V-Belt)

404.50 477.10 477.10 Stacked End Drive (C-Face)** 141.80 168.40 168.40 Stacked End Drive (V-Belt)** 303.50 329.80 329.80 Center (C-Face) 691.80 830.30 830.30 Center (V-Belt) 853.40 991.70 991.70 Side Mounted Center (C-Face) 934.90 1145.90 1145.90 Side Mounted Center (V-Belt) 1096.20 1307.50 1307.50 Center w/ Ext.Take-Up C-Face 1225.50 1564.40 1564.40 Center w/ Ext. Take-Up V-Belt 1369.60 853.50 853.50 High Perf. Center C-Face 1536.10 1874.80 1874.80 Heavy Duty Center C-Face 1227.60 1493.90 1493.90 #50 O-Ring Drive Chain ...... Add ................................. 186.30 **Minimum elevation 28 1/16 ”withV-belt Drive, 33 1/16 ”with C-face drive.

16"

18"

20"

24"

30”

34”

Min. Length Overall

29 1/2" 29 1/2" 29 1/2" 29 1/2" 44 1/2" 44 1/2" 44 1/2" 44 1/2" 59 1/2" 71 1/2” 71 1/2” 938.40 993.50 1048.40 1103.40 1278.90 1337.50 1396.10 1454.50 1853.70 2258.20 2258.20 60.20 65.60 70.90 76.40 81.80 86.80 94.00 99.50 110.00 125.80 125.80

Price

Price Per Foot

#50 O-Ring Chain on Slave Connection - Add -- 133.20

PRICELIST | 07012019