10072020_PriceList_1.1

25-PVE24EZ

• OPTIONAL EQUIPMENT

IMPORTANT NOTES

• OTHER LENGTHS Use per foot price of width x OAL + zone price x total number of zones, plus base price. NOTE : OAL must be divisible by zone length. Zone length must be divisible by roller centers.

• FLOOR SUPPORTS Floor Supports are not included in base price. There are two (2) stationary floor supports required for the first bed section and one (1) support required per bed section thereafter.

NOTE : Longer zones may require an additional floor support depending on product load.

• OTHER WIDTHS All non-standard widths contact factory for pricing and lead time.

• FLOOR SUPPORTS Not Included in Base Price. Use Chart Below for Required Elevation. "HSN" SUPPORT Model No. Adjustment to Top of Roller Price Up To 73 1/4”OAW

Price Above 74 1/4”OAW

HSN-1** HSN-2** HSN-3** HSN-4* HSN-5* HSN-6* HSN-7* HSN-8* HSN-9* HSN-10* HSN-11* HSN-12*

10 1/2" to 12" 12”to 15” 15" to 18" 18" to 21" 21" to 24" 24" to 30" 30" to 36" 36" to 48" 48" to 60" 60" to 72" 72" to 84" 84" to 96"

61.10 61.50 82.40 84.30 87.20 98.40 124.40 138.80 170.40 182.50 213.70 225.10

61.10 61.50 89.30 94.90 97.60 108.70 149.00 163.10 207.20 218.60 262.60 273.90

*Knee Braces (Included in support price) Extra Knee Braces..........................Add Per Pair...............46.20

• CONSTANT AND VARIABLE SPEEDS Constant Speed—Up to 24 FPM, For faster speeds, contact factory. • LONGER ZONES 64”- 90” 3’-0”Connector Cable...........Add Per Zone....................201.10 100”- 120” 6’-0”Connector Cable...........Add Per Zone....................201.10 • DIFFUSE ZONE CONTROLLERS Add Per Zone..................................................................19.10 • GUARD RAILS Angle Type“A” 2”x 1 5/8”x 1/4” One Side................... Per Foot.......................................... 7.40 • EZLOGIC®- See EZLogic® Component Page

• GALVANIZING- Contact Factory

PRICELIST | 01022019