10072020_PriceList_1.1

190-E24

24 Volt DC Live Roller

PRICES FOR COMPLETE CONVEYOR INCLUDE:

• 1.9” Dia. x 16 Ga. Galvanized Roller (Rollers on 3” Centers) in a 6 1/2 ” x 12 Ga. Channel Frame • 25-254 FPM, set on Integrated Motor Controller • 24 Volt DC motors with integrated motor control card mounted on the inside of the BR • 3/16 in. Dia. Polyurethane O-Rings Slave-Drive

Tread Rollers from Motor • 40 AMP DC Power Supply, 28 Volt Fixed Output. Maximum of 40 Motors per Power Supply. Requires 120 or 230 single phase voltage, 24 AMP Input. Mounted Near Center of Conveyor • Less Floor Supports

190-E24 and 190-E24C shown together, less supports.

3 in. Roller Centers

Between Rail Width

Section Length

9”

11”

13”

15”

17”

19”

21”

23”

25”

27”

31”

33”

37”

39”

Overall FrameWidth

12”

14”

16”

18”

20”

22”

24”

26”

28”

30”

34”

36”

40”

42”

10’-0”OAL Base Price

3970

3992

4014

4036

4058

4079

4102

4124

4146

4168

4212

4235

4279

4300

Per Foot Price 195.90 198.10 200.30 202.60 204.80 206.90 209.00 211.20 213.40 215.70 220.10 222.20 226.60 228.80

NOTE :

• Base Price Includes 40 amp DC power supply for motors.

2 in. Roller Centers

Between Rail Width

Section Length

9”

11”

13”

15”

17”

19”

21”

23”

25”

27”

31”

33”

37”

39”

Overall FrameWidth

12”

14”

16”

18”

20”

22”

24”

26”

28”

30”

34”

36”

40”

42”

10’-0”OAL Base Price

4766

4802

4837

4872

4907

4942

4977

5012

5048

5083

5153

5188

5258

5294

Per Foot Price 275.00 278.60 282.10 285.60 289.10 292.60 296.10 299.60 303.20 306.70 313.70 317.20 342.20 327.80

NOTE :

• Base Price Includes 40 amp DC power supply for motors.

IMPORTANT NOTES

• OTHER WIDTHS For“IN-BETWEENWIDTHS”, use next width plus 10%. For widths above 42”OAW, contact factory for lead time. • FLOOR SUPPORTS Floor Supports are not included in base price. There are two (2) stationary floor supports required for the first bed section and one (1) support per bed section thereafter.

• OTHER LENGTHS For lengths longer than 10’-0”add per foot price of width x additional length to base price.

NOTE : OAL must be divisible by roller centers. NOTE : Contact factory for speeds above 125 FPM.

190-E24C

24 Volt DC Live Roller Curve

PRICES FOR COMPLETE CONVEYOR INCLUDE:

30º. Driven from 190-E24 Power Supply. • 25-254 FPM, set on Integrated Motor Controller • Motors mounted on inside of channel • Power Supply Not Included • Less Floor Supports

• 2 1/2 ” Dia. Galvanized Tapered to 1 11/16 ” Dia. x 14 Ga Roller in 6 1/2 ” x 12 Ga. Channel • (2) 24 Volt DC motors with integrated motor control card in 90º and 60º; (1) 24 Volt DC motor with integrated control card in 45º and

Between Rail Width

9”

11”

13”

15”

17”

19”

21”

23”

25”

27”

31”

33”

37”

39”

Section

Overall FrameWidth

12”

14”

16”

18”

20”

22”

24”

26”

28”

30”

34”

36”

40”

42”

90º 60º 45º 30º

1435 1435 774 774

1463 1463 788 788

1491 1491 803 803

1519 1519 818 818

1547 1547 832 832

1575 1575 847 847

1603 1603 861 861

1631 1631 876 876

1659 1659 891 891

1687 1687 905 905

2159 2159 1171 1171

2239 2239 1207 1207

2401 2401 1280 1280

2482 2482 1316 1316

NOTE:

• PRICE DOES NOT INCLUDE POWER SUPPLY • Total specification of product is required; product is recommended for testing. Product footprint may affect drive capacity. • 9’’BR has an outside mounted motor and uses Hytrol’s 3.0 card.

IMPORTANT NOTE

• OTHER WIDTHS

Contact factory for other widths.

IMPORTANT NOTE•OTHER WIDTHS Contact factory for otherwidths.3 in.Roler CentersSectionLengthBetwen RailWidth9”1”13”15”17”19”21”23”25”27”31”3”37”39”Overal Frame Width12”14”16”18”20”2”24”26”28”30”34”36”40”42”10’-0” OAL Base Price3970392401403640584079410241241464168421242354279430Per Fot Price195.90198.1020.30202.60204.80206.90209.021.20213.40215.7020.102.2026.6028.80 NOTE : • Base Price Includes 40 amp DC power suply formotors.SectionBetwen RailWidth9”1”13”15”17”19”21”23”25”27”31”3”37”39”Overal Frame Width12”14”16”18”20”2”24”26”28”30”34”36”40”42”90º136313914191471475150315315915872059213923012382960º1363139141914714751503153159158720592139230123829645º687037187327476176791805107107180121617230º6870371873274761767918051071071801216172 NOTE:• PRICE DOES NOT INCLUDE POWER SUPLY • Total specification of product is required; proct is recomme nded for testing.Prodct fotprintmay affect drive capacity.•9’BR has an outside mounted m torand uses Hytrol’s 3.0 card. 190-E24 24 Volt DC Live Roller 190-E24 and 190-E24C shown together , less supports. C 24ol Curve IMPORTANT NOTES•OTHER LENGTHS For lengths longer than 10’-0” ad per fot price ofwidth x aditional length to base price. NOTE :OAL must be divisible by roler centers. NOTE :Contact factory for speds above 125 FPM. •OTHER WIDTHS For “IN-BETWEN WIDTHS”,use nextwidth plus 10%. Forwidths above 42” OAW, contact factory foleadtime . •FLOR SUPORTS Flor Suports are not included in base price. There are two (2) stationary flor suports required for the first bed section and one (1) suport per bed section thereafter. PRICES FOR COMPLETE NVEYOR INCLUDE: -E24 & 190-E24C • OPTIONAL EQUIPMENT • AVAILABLE SPEDS • MOTOR AND SEPARATE CONTROL CARD Ad-on permotor.106.90• 5 AMP POWER SUPLY (190-E24 ONLY) 3 motorsmaximum(In lieu ofstandard40 amp)Deduct.60.0• 20AMP POWER SUPLY (190-E24 ONLY) 20 motors or les(n liu ostandrd40 amDeduct.295.30• 40AMP POWER SUPLY (190-E24 ONLY) When two ormore models share one power suply.Deduct.1564.80• 5 AMP POWER SUPLY 115/230/1 (190-E24C ONLY) 3 motorsmaximum.ad on.132.0• 5 AMP POWER SUPLY 46 3 (19-E24C ONLY) 3 motorsmaximum.ad on.132.0• GLOBAL SPED CONTROLERS 2 sped controlers for 40 amp Power Suply.280.701 sped controler for 40 amp Power Suply.140.401 sped controlerwith T-Cable for 20 amp Power Suply.182.0Note: Each Sped Controler rated for 20 motors only. •FLOR SUPORTS Not Included in Base Price.Use Chart Below for Required Elevation."MS" SUPPORTMode lNo.Adjustment toTop of RolerPriceEach MS-113 3/4" to 15 1/2"38.30 M-.214 3/4" to 16 1/2"38.30 M-.415 3/4" to 17 1/2"38.30 M-216 3/4" to 19 3/4"39.50 M-319 3/8" to 2 3/8"43.50 M-42 3/8" to 28 3/8"50.10 M-526 3/8" to 32 3/8"52.30 M-630 3/8" to 42 3/8"57.70 M-740 3/8" to 52 3/8"85.20 M-852 3/8" to 64 3/8"97.30 M-964 3/8" to 76 3/8"106.60 M-1076 3/8" to 8 3/8"121.50 M-186 3/8" to 98 3/8"134.40 M-298 3/8" to 10 3/8"140.60 NOTE :MS-7 to MS-12:Kne Braces included in price. Extra Kne Braces .per pair.19.0Single Center Leg (MSC-6 and below) .each.39.50Single Center Leg (MSC-7 and above) .each.49.20• CEILING HANGERS -Se Ceiln Hangers• POLY-TIER SUPORTS -e Poly-Tier Suppor t Pricin.• ROLERS SET LOW- 190-E24 Both sides.Per fot.2.30• PRECISION ROLER BEARINGS (Recommndd forspeds above 150 FPM.)190-E24CABEC-1 Bear ng with Plastic Housin s90º and 60º18"-30” OAW.230.2034"-42” OAW.343.8045º and 30º18”-30” OAW.14.4034”-42” OAW.160.60• LOW ELEVATION POWER SUPLY MOUNTING KIT each.82.10• GUARD RAILS - 190-E24 Adjustable Universal ChanelGuard RailBoth Sides.per foot .9.90One Side.prfo.5.0Angle TypeTypes “A” or “B” available (specify).Prices are for both sides.Type “A”1 1/2” x 1 1/2” x 12 Ga.prfo.5.0Type “B” (Se NOTE )1 1/2” x 1 1/2” x 12 Ga.prfo.5.0• ROLERS SET LOW- 190-E24C Both sides.Each.2.40• GUARD RAILS - 190-E24C Adjustable Universal ChanelGuard RailBoth Sides.147.0Outside Only.9.10Inside Only.65.20Angle Type “A”1 1/2” x 1 1/2” x 12 Ga.Both Sides.60.10Outside Only.37.20Inside Only.2.10Angle Type “B”1 1/2” x 1 1/2” x 12 Ga.Both Sides.89.80Outside Only.57.0Inside Only.3.10 NOTE : If product comes in contactwith guard rails,product flow willb affected.• TANGENTS laved TangtOAL Tanget (Slaved from Curve with O-Rings)3”, 6”.18.50Powered TangentOAL Tangent (Powered with (1) 24V DC Motor and Cables)9”.628.012”.628.015”.658.6018”.687.9021”.717.20 NOTE : 12” - 21” OAL powered tangents include (1) 24 VDC motor, control card, and cables. The tangetmorcan share power from either the power suply on the curve or an adjacent 190-E24 model.• PACKAGE STOPS - Air Operated LinearThrusterType (Pin, Rol ler, oBlad) 13” to 39” Betwen Rail width..1082.0 NOTE : Filter Regulator Unit not suplied as standard. Stops are suplied in NORMALY DOWN position with SINGLE SOLENOID VALVE. Can b suppl ied in NRMA LY UPpos ito . Can also be suplied with DOUBLE SOLENOID VALVE. Contact Factory.• GALVANIZING -Contact Factory •1.9” Dia. x 16 Ga. lvanized Roller (Roller on 3” Centers) in a 6 1/2 ” x 12 Ga. Channel Fr me •25-254 FPM, set on Integrated Motor C ntroller •24 Volt DC m s with in egrated m control card mounted on the inside of the BR • 3/16 in. Dia. Polyurethane O-Rings Slave-Drive Tread Rolers from Motor•40AMP DCPower Supply , 28Vol Fixed Output. Maximum of 40 Motors p r Power S. Requires 12 or 230 single phase voltage, 24 AM Input. Mounted Near Center of Conveyor •Less Floor Su orts •2 1/2 ” Dia. Galvanized Tapered to 1 1/16 ” x 14 Ga Roller in 6 1/2 ” x 12 G C a ne •(2) 2Volt Dm t rs wi h i egra m c nt ol ar in 90º and 60º; (1) 24 V o DC m r with integrated control card in 45º and 30º Driven from 190-E24 P wer Supply .•25- 54 FPM, set on Integrate MControl er •M s m unted o i side of channel •Power Sup ly N t I clud d •Less Fl or S o t RPM OutSped, FPMDIP SWIT CH SET TINGS STDPOOLEED UP OW345635017425OFF330164240ONF31154225ONF290144211ONF27013496ONF25012482ONFNF23011467ONF21010453ONF19095138ON17085123OFN1507109OFNFN1306594OFN115580OFN9456OFN703251OFN502536O 2 in.Roler CentersSectionLengthBetwen RailWidth9”1”13”15”17”19”21”23”25”27”31”3”37”39”Overal Frame Width12”14”16”18”20”2”24”26”28”30”34”36”40”42”10’-0” OAL Base Price47648024837487249074942497501250485083515351852585294Per Fot Price275.0278.60282.10285.60289.10292.60296.1029.60303.20306.70313.70317.20342.20327.80 NOTE : • Base Price Includes 40 amp DC power suply formotors. IMPORTANT NOTE•OTHER WIDTHS Contact factory for otherwidths.3 in.Roler CentersSectionLengthBetwen RailWidth9”1”13”15”17”19”21”23”25”27”31”3”37”39”Overal Frame Width12”14”16”18”20”2”24”26”28”30”34”36”40”42”10’-0” OAL Base Price3970392401403640584079410241241464168421242354279430Per Fot Price195.90198.1020.30202.60204.80206.90209.021.20213.40215.7020.102.2026.6028.80 NOTE : • Base Price Includes 40 amp DC power suply formotors.SectionBetwen RailWidth9”1”13”15”17”19”21”23”25”27”31”3”37”39”Overal Frame Width12”14”16”18”20”2”24”26”28”30”34”36”40”42”90º136313914191471475150315315915872059213923012382960º1363139141914714751503153159158720592139230123829645º687037187327476176791805107107180121617230º6870371873274761767918051071071801216172 NOTE:• PRICE DOES NOT INCLUDE POWER SUPLY •Total specifiatio ofproduct is required; proct is recommndd fortesting.Prodct fotprntmay affect drive capacity.•9’Bhas an outside mounted m torand uses Hytrol’s 3.0 card. 24 ol L 19shown , lsupp 24ol IMPORTANT NOTES•OTHER LENGTHS For lengths longer than 10’-0” ad per fot price ofwidth x aditional length to base price. NOTE :OAL must be divisible by roler centers. NOTE :Contact factory for speds above 125 FPM. •OTHER WIDTHS For “IN-BETWEN WIDTHS”,use nextwidth plus 10%. Forwidths above 42” OAW, contact fctory foleadtime . •FLOR SUPORTS Flor Suports are not included in base price. There are two (2) stationary flor suports required for the first bed section and one (1) suport per bed section thereafter. P I S F RC M LET N YO I D •EQUI M •AVAILABLE SPEDS • MOTOR AND SEPARATE CONTROL CARD Ad-on permotor.106.90• 5 AMP POWER SUPLY (19-E24 ONLY) 3 motorsmaximum(In lieu ofstandard40 ampDeduct.60.0• 20AMP POWER SUPLY (190-E24 ONLY) 20 motors or les(n liu ostandrd40 amDeduct.295.30• 40AMP POWER SUPLY (190-E24 ONLY) When two ormore models share one power suply.Deduct.1564.80• 5 AMP POWER SUPLY 115 23 (190-E24C ONLY) 3 motorsmaximum.ad on.132.0• 5 AMP POWER SUPLY 46 3 (19-E24C ONLY) 3 motorsmaximum.ad on.132.0• GLOBAL SPED CONTROLERS 2 sped controlers for 40 amp Power Suply.280.701 sped controler for 40 amp Power Suply.140.401 sped controlerwith T-Cable for 20 amp Power Suply.182.0Note: Each Sped Controler rated for 20 motors only. •FLOR SUPORTS Not Included in Base Price.Use Chart Below for Required Elevation."SUPPORTMolNo.Adjustment toTop of RolerPriceEach MS-113 3/4" to 15 1/2"38.30 M-.214 3/4" to 16 1/2"38.30 M-.415 3/4" to 17 1/2"38.30 M-216 3/4" to 19 3/4"39.50 M-319 3/8" to 2 3/8"43.50 M-42 3/8" to 28 3/8"50.10 M-526 3/8" to 32 3/8"52.30 M-630 3/8" to 42 3/8"57.70 M-740 3/8" to 52 3/8"85.20 M-852 3/8" to 64 3/8"97.30 M-964 3/8" to 76 3/8"106.60 M-1076 3/8" to 8 3/8"121.50 M-186 3/8" to 98 3/8"134.40 M-298 3/8" to 10 3/8"140.60 NOTE :MS-7 to MS-12:Kne Braces included in price. Extra Kne Braces .per pair.19.0Single Center Leg (MSC-6 and below) .each.39.50Single Center Leg (MSC-7 and above) .each.49.20• CEILING HANGERS -Se Ceiln Hangers• POLY-TIER SUPORTS -e Poly-Tier Suppot Pricin.• ROLERS SET LOW- 190-E24 Both sides.Per fot.2.30• PRECISION ROLER BEARINGS (Rcommndd forspeds above 150 FPM.)190-E24CABC Bear n with Plastic Housin s90º and 60º18"-30” OAW.230.2034"-42” OAW.343.8045º and 30º18”-30” OAW.14.4034”-42” OAW.160.60• LOW ELEVATION POWER SUPLY MOUNTING KIT each.82.10• GUARD RAILS - 190-E24 Adjustable Universal ChanelGuard RailBoth Sides.per foo.9.90One Side.prfo.5.0Angle TypeTypes “A” or “B” available (specify).Prices are for both sides.Type “A”1 1/2” x 1 1/2” x 12 Ga.prfo.5.0Type “B” (Se NOTE )1 1/2” x 1 1/2” x 12 Ga.prfo.5.0• ROLERS SET LOW- 190-E24C Both sides.Each.2.40• GUARD RAILS - 190-E24C Adjustable Universal ChanelGuard RailBoth Sides.147.0Outside Only.9.10Inside Only.65.20Angle Type “A”1 1/2” x 1 1/2” x 12 Ga.Both Sides.60.10Outside Only.37.20Inside Only.2.10Angle Type “B”1 1/2” x 1 1/2” x 12 Ga.Both Sides.89.80Outside Only.57.0Inside Only.3.10 NOTE : If product comes in contactwith guard rails,product flw willb affected.• TANGENTS laved TangtOAL Tanget (Slaved from Curve with O-Rings)3”, 6”.18.50Powered TangentOAL Tangent (Powered with (1) 24V DC Motor and Cables)9”.628.012”.628.015”.658.6018”.687.9021”.717.20 NOTE : 12” - 21” OAL powered tangents include (1) 24 VDC motor, control card, and cables. The tangetmorcan share power from either the power suply on the curve or an adjacent 190-E24 model.• PACKAGE STOPS -Air Operated LiarThrusterType (Pin, Roler, oBlad) 13” to 39” Betwen Rail width..1082.0 NOTE : Filter Regulator Unit not suplied as standard. Stops are suplied in NORMALY DOWN position with SINGLE SOLENID VALV. Can b suppl ied in NRMAY UPpos ito . Can also be suplied with DOUBLE SOLENOID VALVE. Contact Factory.• GALVANIZING -Contact Factory •1.9”Dia. x 16 Ga. lvan z Roll r (R rs on 3 Ce ter in 1/2 ” x 12 G C Fr me •25- 4 FPMset on I te at M t C n r •24 Volt DCm s wit i egrated m control c m un e n • 316 in. D a o yu eth R e Tread Rolers from Motor•40AMP DCPower Sup ly , 28Vol Fixe Output. ax mum 0 M o pe S. Requires 1 or i voltage, AM Input e of Co e o •Less Floor Su o ts •2 1/2 ” Di . Gal Tapered t 1 1/16 ” x 14 Ga R l 1/2 ” x 12 G C a ne •(2 2Volt Dm t rs wi h i egra m c nt ol ar i o DCm w i gr on d 30º .•25- 54 FPM, set on Integ ate MControl er •M s m unted o i side of channel •Power Sup ly N t I clud d •Le s Fl or S o t ROutSped, FPMD T CTSTPE OW34563517425OF330164240ONF31154225ONF290144211ONF27013496ONF25012482ONFNF23011467ONF21010453ONF19095138ON17085123OFN1507109OFNFN1306594OFN115580OFN9456OFN703251OFN502536O 2 in.Roler CentersSectionLengthBetwen RailWidth9”1”13”15”17”19”21”23”25”27”31”3”37”39”Overal Frame Width12”14”16”18”20”2”24”26”28”30”34”36”40”42”10’-0” OAL Base Price47648024837487249074942497501250485083515351852585294Per Fot Price275.0278.60282.10285.60289.10292.60296.1029.60303.20306.70313.70317.20342.20327.80 NOTE : • Base Price Includes 40 amp DC power suply formotors.

PRICELIST | 01022019