10072020_PriceList_1.1

190-E24 & 190-E24C

• OPTIONAL EQUIPMENT • AVAILABLE SPEEDS

• GUARD RAILS - 190-E24 Adjustable Universal Channel Guard Rail

• FLOOR SUPPORTS Not Included in Base Price. Use Chart Below for Required Elevation.

Speed, FPM

DIP SWITCH SETTINGS

RPM Out

Both Sides......................................per foot..................... 9.90 One Side.........................................per foot..................... 5.00

STD SPOOL

SPEED UP SPOOL

SW3 SW4 SW5 SW6

"MS" SUPPORT Adjustment to Top of Roller 13 3/4" to 15 1/2" 14 3/4" to 16 1/2" 15 3/4" to 17 1/2" 16 3/4" to 19 3/4" 19 3/8" to 22 3/8" 22 3/8" to 28 3/8" 26 3/8" to 32 3/8" 30 3/8" to 42 3/8" 40 3/8" to 52 3/8" 52 3/8" to 64 3/8" 64 3/8" to 76 3/8" 76 3/8" to 88 3/8" 86 3/8" to 98 3/8" 98 3/8" to 110 3/8"

350 330 310 290 270 250 230 210 190 170 150 130 110

174 164 154 144 134 124 114 104

254 240 225 211 196 182 167 153 138 123 109

OFF OFF OFF OFF ON OFF OFF OFF OFF ON OFF OFF ON ON OFF OFF OFF OFF ON OFF ON OFF ON OFF OFF ON ON OFF ON ON ON OFF OFF OFF OFF ON ON OFF OFF ON OFF ON OFF ON ON ON OFF ON OFF OFF ON ON ON OFF ON ON OFF ON ON ON ON ON ON ON

Angle Type Types“A”or“B”available (specify). Prices are for both sides.

Model No.

Price Each 38.30 38.30 38.30 39.50 43.50 50.10 52.30 57.70 85.20 97.30

MS-1 MS-1.2 MS-1.4 MS-2 MS-3 MS-4 MS-5 MS-6 MS-7 MS-8 MS-9 MS-10 MS-11 MS-12

Type“A” 1 1/2”x 1 1/2”x 12 Ga.........................per foot..................... 5.00 Type“B”(See NOTE ) 1 1/2”x 1 1/2”x 12 Ga.........................per foot..................... 5.00 • ROLLERS SET LOW- 190-E24C Both sides.....................................Each........................ 22.40

106.60 121.50 134.40

95 85 75 65 55 45 32 25

140.60 NOTE : MS-7 to MS-12: Knee Braces included in price. Extra Knee Braces ....... per pair....................................... 19.0 Single Center Leg (MSC-6 and below) ................................... each.............................................................................. 39.50 Single Center Leg (MSC-7 and above) ................................... each.............................................................................. 49.20

• GUARD RAILS - 190-E24C Adjustable Universal Channel Guard Rail

94 80 65 51 36

Both Sides................................................................... 147.00 Outside Only.................................................................. 99.10 Inside Only.................................................................... 65.20

90 70 50

Angle Type“A” 1 1/2”x 1 1/2”x 12 Ga.

Both Sides..................................................................... 60.10 Outside Only.................................................................. 37.20 Inside Only.................................................................... 22.10

• MOTOR AND SEPARATE CONTROL CARD Add-on per motor....................................................... 106.90 • 5 AMP POWER SUPPLY (190-E24 ONLY) 3 motors maximum (In lieu of standard 40 amp) Deduct........................................................................ 600.00 • 20 AMP POWER SUPPLY (190-E24 ONLY) 20 motors or less (In lieu of standard 40 amp) Deduct........................................................................ 295.30 • 40 AMP POWER SUPPLY (190-E24 ONLY) When two or more models share one power supply. Deduct...................................................................... 1564.80 • 5 AMP POWER SUPPLY 115/230/1 (190-E24C ONLY) 3 motors maximum.......................add on................. 1322.00 • 5 AMP POWER SUPPLY 460/3 (190-E24C ONLY) 3 motors maximum.......................add on................. 1322.00 • GLOBAL SPEED CONTROLLERS 2 speed controllers for 40 amp Power Supply...............280.70 1 speed controller for 40 amp Power Supply................140.40 1 speed controller with T-Cable for 20 amp Power Supply...... ................................................................................... 182.00 Note: Each Speed Controller rated for 20 motors only.

• CEILING HANGERS -See Ceiling Hangers

• POLY-TIER SUPPORTS -See Poly-Tier Support Pricing.

Angle Type“B” 1 1/2”x 1 1/2”x 12 Ga.

• ROLLERS SET LOW- 190-E24 Both sides.....................................Per foot..................... 2.30

Both Sides..................................................................... 89.80 Outside Only.................................................................. 57.00 Inside Only.................................................................... 33.10

• PRECISION ROLLER BEARINGS (Recommended for speeds above 150 FPM.)

NOTE : If product comes in contact with guard rails, product flow will be affected.

190-E24C ABEC-1 Bearings with Plastic Housings 90º and 60º

• TANGENTS

Slaved Tangent OAL Tanget (Slaved from Curve with O-Rings) 3”, 6”............................................................................ 118.50 Powered Tangent OAL Tangent (Powered with (1) 24V DC Motor and Cables) 9”................................................................................ 628.00 12”.............................................................................. 628.00 15”.............................................................................. 658.60 18”.............................................................................. 687.90 21”.............................................................................. 717.20 NOTE : 12”- 21”OAL powered tangents include (1) 24 VDC motor, control card, and cables. The tangent motor can share power from either the power supply on the curve or an adjacent 190-E24 model. • PACKAGE STOPS - Air Operated Linear Thruster Type (Pin, Roller, or Blade) 13”to 39”Between Rail width.........1082.00 NOTE : Filter Regulator Unit not supplied as standard. Stops are supplied in NORMALLY DOWN position with SINGLE SOLENOID VALVE. Can be supplied in NORMALLY UP position. Can also be supplied with DOUBLE SOLENOID VALVE. Contact Factory.

18"-30”OAW............................................................... 230.20 34"-42”OAW............................................................... 343.80

45º and 30º 18”-30”OAW............................................................... 114.40 34”-42”OAW............................................................... 160.60

• LOW ELEVATION POWER SUPPLY MOUNTING KIT each............................................................................ 82.10

• GALVANIZING -Contact Factory

PRICELIST | 05062019 IMPORTANT NOTE•OTHER WIDTHS Contact factory for otherwidths.3 in.Roler CentersSectionLengthBetwen RailWidth9”1”13”15”17”19”21”23”25”27”31”3”37”39”Overal Frame Width12”14”16”18”20”2”24”26”28”30”34”36”40”42”10’-0” OAL Base Price3970392401403640584079410241241464168421242354279430Per Fot Price195.90198.1020.30202.60204.80206.90209.021.20213.40215.7020.102.2026.6028.80 NOTE : • Base Price Includes 40 amp DC power suply formotors.SectionBetwen RailWidth9”1”13”15”17”19”21”23”25”27”31”3”37”39”Overal Frame Width12”14”16”18”20”2”24”26”28”30”34”36”40”42”90º136313914191471475150315315915872059213923012382960º1363139141914714751503153159158720592139230123829645º687037187327476176791805107107180121617230º6870371873274761767918051071071801216172 NOTE:• PRICE DOES NOT INCLUDE POWER SUPLY • Total specification of product is required; proct is recomme nded for testing.Prodct fotprintmay affect drive capacity.•9’BR has an outside mounted m torand uses Hytrol’s 3.0 card. 190-E24 24 Volt DC Live Roller 190-E24 and 190-E24C shown together , less supports. C 24ol Curve IMPORTANT NOTES•OTHER LENGTHS For lengths longer than 10’-0” ad per fot price ofwidth x aditional length to base price. NOTE :OAL must be divisible by roler centers. NOTE :Contact factory for speds above 125 FPM. •OTHER WIDTHS For “IN-BETWEN WIDTHS”,use nextwidth plus 10%. Forwidths above 42” OAW, contact factory foleadtime . •FLOR SUPORTS Flor Suports are not included in base price. There are two (2) stationary flor suports required for the first bed section and one (1) suport per bed section thereafter. PRICES FOR COMPLETE NVEYOR INCLUDE: -E24 & 190-E24C • OPTIONAL EQUIPMENT • AVAILABLE SPEDS • MOTOR AND SEPARATE CONTROL CARD Ad-on permotor.106.90• 5 AMP POWER SUPLY (190-E24 ONLY) 3 motorsmaximum(In lieu ofstandard40 amp)Deduct.60.0• 20AMP POWER SUPLY (190-E24 ONLY) 20 motors or les(n liu ostandrd40 amDeduct.295.30• 40AMP POWER SUPLY (190-E24 ONLY) When two ormore models share one power suply.Deduct.1564.80• 5 AMP POWER SUPLY 115/230/1 (190-E24C ONLY) 3 motorsmaximum.ad on.132.0• 5 AMP POWER SUPLY 46 3 (19-E24C ONLY) 3 motorsmaximum.ad on.132.0• GLOBAL SPED CONTROLERS 2 sped controlers for 40 amp Power Suply.280.701 sped controler for 40 amp Power Suply.140.401 sped controlerwith T-Cable for 20 amp Power Suply.182.0Note: Each Sped Controler rated for 20 motors only. •FLOR SUPORTS Not Included in Base Price.Use Chart Below for Required Elevation."MS" SUPPORTMode lNo.Adjustment toTop of RolerPriceEach MS-113 3/4" to 15 1/2"38.30 M-.214 3/4" to 16 1/2"38.30 M-.415 3/4" to 17 1/2"38.30 M-216 3/4" to 19 3/4"39.50 M-319 3/8" to 2 3/8"43.50 M-42 3/8" to 28 3/8"50.10 M-526 3/8" to 32 3/8"52.30 M-630 3/8" to 42 3/8"57.70 M-740 3/8" to 52 3/8"85.20 M-852 3/8" to 64 3/8"97.30 M-964 3/8" to 76 3/8"106.60 M-1076 3/8" to 8 3/8"121.50 M-186 3/8" to 98 3/8"134.40 M-298 3/8" to 10 3/8"140.60 NOTE :MS-7 to MS-12:Kne Braces included in price. Extra Kne Braces .per pair.19.0Single Center Leg (MSC-6 and below) .each.39.50Single Center Leg (MSC-7 and above) .each.49.20• CEILING HANGERS -Se Ceiln Hangers• POLY-TIER SUPORTS -e Poly-Tier Suppor t Pricin.• ROLERS SET LOW- 190-E24 Both sides.Per fot.2.30• PRECISION ROLER BEARINGS (Recommndd forspeds above 150 FPM.)190-E24CABEC-1 Bear ng with Plastic Housin s90º and 60º18"-30” OAW.230.2034"-42” OAW.343.8045º and 30º18”-30” OAW.14.4034”-42” OAW.160.60• LOW ELEVATION POWER SUPLY MOUNTING KIT each.82.10• GUARD RAILS - 190-E24 Adjustable Universal ChanelGuard RailBoth Sides.per foot .9.90One Side.prfo.5.0Angle TypeTypes “A” or “B” available (specify).Prices are for both sides.Type “A”1 1/2” x 1 1/2” x 12 Ga.prfo.5.0Type “B” (Se NOTE )1 1/2” x 1 1/2” x 12 Ga.prfo.5.0• ROLERS SET LOW- 190-E24C Both sides.Each.2.40• GUARD RAILS - 190-E24C Adjustable Universal ChanelGuard RailBoth Sides.147.0Outside Only.9.10Inside Only.65.20Angle Type “A”1 1/2” x 1 1/2” x 12 Ga.Both Sides.60.10Outside Only.37.20Inside Only.2.10Angle Type “B”1 1/2” x 1 1/2” x 12 Ga.Both Sides.89.80Outside Only.57.0Inside Only.3.10 NOTE : If product comes in contactwith guard rails,product flow willb affected.• TANGENTS laved TangtOAL Tanget (Slaved from Curve with O-Rings)3”, 6”.18.50Powered TangentOAL Tangent (Powered with (1) 24V DC Motor and Cables)9”.628.012”.628.015”.658.6018”.687.9021”.717.20 NOTE : 12” - 21” OAL powered tangents include (1) 24 VDC motor, control card, and cables. The tangetmorcan share power from either the power suply on the curve or an adjacent 190-E24 model.• PACKAGE STOPS - Air Operated LinearThrusterType (Pin, Rol ler, oBlad) 13” to 39” Betwen Rail width..1082.0 NOTE : Filter Regulator Unit not suplied as standard. Stops are suplied in NORMALY DOWN position with SINGLE SOLENOID VALVE. Can b suppl ied in NRMA LY UPpos ito . Can also be suplied with DOUBLE SOLENOID VALVE. Contact Factory.• GALVANIZING -Contact Factory •1.9” Dia. x 16 Ga. lvanized Roller (Roller on 3” Centers) in a 6 1/2 ” x 12 Ga. Channel Fr me •25-254 FPM, set on Integrated Motor C ntroller •24 Volt DC m s with in egrated m control card mounted on the inside of the BR • 3/16 in. Dia. Polyurethane O-Rings Slave-Drive Tread Rolers from Motor•40AMP DCPower Supply , 28Vol Fixed Output. Maximum of 40 Motors p r Power S. Requires 12 or 230 single phase voltage, 24 AM Input. Mounted Near Center of Conveyor •Less Floor Su orts •2 1/2 ” Dia. Galvanized Tapered to 1 1/16 ” x 14 Ga Roller in 6 1/2 ” x 12 G C a ne •(2) 2Volt Dm t rs wi h i egra m c nt ol ar in 90º and 60º; (1) 24 V o DC m r with integrated control card in 45º and 30º Driven from 190-E24 P wer Supply .•25- 54 FPM, set on Integrate MControl er •M s m unted o i side of channel •Power Sup ly N t I clud d •Less Fl or S o t RPM OutSped, FPMDIP SWIT CH SET TINGS STDPOOLEED UP OW345635017425OFF330164240ONF31154225ONF290144211ONF27013496ONF25012482ONFNF23011467ONF21010453ONF19095138ON17085123OFN1507109OFNFN1306594OFN115580OFN9456OFN703251OFN502536O 2 in.Roler CentersSectionLengthBetwen RailWidth9”1”13”15”17”19”21”23”25”27”31”3”37”39”Overal Frame Width12”14”16”18”20”2”24”26”28”30”34”36”40”42”10’-0” OAL Base Price47648024837487249074942497501250485083515351852585294Per Fot Price275.0278.60282.10285.60289.10292.60296.1029.60303.20306.70313.70317.20342.20327.80 NOTE : • Base Price Includes 40 amp DC power suply formotors. IMPORTANT NOTE•OTHER WIDTHS Contact factory for otherwidths.3 in.Roler CentersSectionLengthBetwen RailWidth9”1”13”15”17”19”21”23”25”27”31”3”37”39”Overal Frame Width12”14”16”18”20”2”24”26”28”30”34”36”40”42”10’-0” OAL Base Price3970392401403640584079410241241464168421242354279430Per Fot Price195.90198.1020.30202.60204.80206.90209.021.20213.40215.7020.102.2026.6028.80 NOTE : • Base Price Includes 40 amp DC power suply formotors.SectionBetwen RailWidth9”1”13”15”17”19”21”23”25”27”31”3”37”39”Overal Frame Width12”14”16”18”20”2”24”26”28”30”34”36”40”42”90º136313914191471475150315315915872059213923012382960º1363139141914714751503153159158720592139230123829645º687037187327476176791805107107180121617230º6870371873274761767918051071071801216172 NOTE:• PRICE DOES NOT INCLUDE POWER SUPLY •Total specifiatio ofproduct is required; proct is recommndd fortesting.Prodct fotprntmay affect drive capacity.•9’Bhas an outside mounted m torand uses Hytrol’s 3.0 card. 24 ol L 19shown , lsupp 24ol IMPORTANT NOTES•OTHER LENGTHS For lengths longer than 10’-0” ad per fot price ofwidth x aditional length to base price. NOTE :OAL must be divisible by roler centers. NOTE :Contact factory for speds above 125 FPM. •OTHER WIDTHS For “IN-BETWEN WIDTHS”,use nextwidth plus 10%. Forwidths above 42” OAW, contact fctory foleadtime . •FLOR SUPORTS Flor Suports are not included in base price. There are two (2) stationary flor suports required for the first bed section and one (1) suport per bed section thereafter. P I S F RC M LET N YO I D •EQUI M •AVAILABLE SPEDS • MOTOR AND SEPARATE CONTROL CARD Ad-on permotor.106.90• 5 AMP POWER SUPLY (19-E24 ONLY) 3 motorsmaximum(In lieu ofstandard40 ampDeduct.60.0• 20AMP POWER SUPLY (190-E24 ONLY) 20 motors or les(n liu ostandrd40 amDeduct.295.30• 40AMP POWER SUPLY (190-E24 ONLY) When two ormore models share one power suply.Deduct.1564.80• 5 AMP POWER SUPLY 115 23 (190-E24C ONLY) 3 motorsmaximum.ad on.132.0• 5 AMP POWER SUPLY 46 3 (19-E24C ONLY) 3 motorsmaximum.ad on.132.0• GLOBAL SPED CONTROLERS 2 sped controlers for 40 amp Power Suply.280.701 sped controler for 40 amp Power Suply.140.401 sped controlerwith T-Cable for 20 amp Power Suply.182.0Note: Each Sped Controler rated for 20 motors only. •FLOR SUPORTS Not Included in Base Price.Use Chart Below for Required Elevation."SUPPORTMolNo.Adjustment toTop of RolerPriceEach MS-113 3/4" to 15 1/2"38.30 M-.214 3/4" to 16 1/2"38.30 M-.415 3/4" to 17 1/2"38.30 M-216 3/4" to 19 3/4"39.50 M-319 3/8" to 2 3/8"43.50 M-42 3/8" to 28 3/8"50.10 M-526 3/8" to 32 3/8"52.30 M-630 3/8" to 42 3/8"57.70 M-740 3/8" to 52 3/8"85.20 M-852 3/8" to 64 3/8"97.30 M-964 3/8" to 76 3/8"106.60 M-1076 3/8" to 8 3/8"121.50 M-186 3/8" to 98 3/8"134.40 M-298 3/8" to 10 3/8"140.60 NOTE :MS-7 to MS-12:Kne Braces included in price. Extra Kne Braces .per pair.19.0Single Center Leg (MSC-6 and below) .each.39.50Single Center Leg (MSC-7 and above) .each.49.20• CEILING HANGERS -Se Ceiln Hangers• POLY-TIER SUPORTS -e Poly-Tier Suppot Pricin.• ROLERS SET LOW- 190-E24 Both sides.Per fot.2.30• PRECISION ROLER BEARINGS (Rcommndd forspeds above 150 FPM.)190-E24CABC Bear n with Plastic Housin s90º and 60º18"-30” OAW.230.2034"-42” OAW.343.8045º and 30º18”-30” OAW.14.4034”-42” OAW.160.60• LOW ELEVATION POWER SUPLY MOUNTING KIT each.82.10• GUARD RAILS - 190-E24 Adjustable Universal ChanelGuard RailBoth Sides.per foo.9.90One Side.prfo.5.0Angle TypeTypes “A” or “B” available (specify).Prices are for both sides.Type “A”1 1/2” x 1 1/2” x 12 Ga.prfo.5.0Type “B” (Se NOTE )1 1/2” x 1 1/2” x 12 Ga.prfo.5.0• ROLERS SET LOW- 190-E24C Both sides.Each.2.40• GUARD RAILS - 190-E24C Adjustable Universal ChanelGuard RailBoth Sides.147.0Outside Only.9.10Inside Only.65.20Angle Type “A”1 1/2” x 1 1/2” x 12 Ga.Both Sides.60.10Outside Only.37.20Inside Only.2.10Angle Type “B”1 1/2” x 1 1/2” x 12 Ga.Both Sides.89.80Outside Only.57.0Inside Only.3.10 NOTE : If product comes in contactwith guard rails,product flw willb affected.• TANGENTS laved TangtOAL Tanget (Slaved from Curve with O-Rings)3”, 6”.18.50Powered TangentOAL Tangent (Powered with (1) 24V DC Motor and Cables)9”.628.012”.628.015”.658.6018”.687.9021”.717.20 NOTE : 12” - 21” OAL powered tangents include (1) 24 VDC motor, control card, and cables. The tangetmorcan share power from either the power suply on the curve or an adjacent 190-E24 model.• PACKAGE STOPS -Air Operated LiarThrusterType (Pin, Roler, oBlad) 13” to 39” Betwen Rail width..1082.0 NOTE : Filter Regulator Unit not suplied as standard. Stops are suplied in NORMALY DOWN position with SINGLE SOLENID VALV. Can b suppl ied in NRMAY UPpos ito . Can also be suplied with DOUBLE SOLENOID VALVE. Contact Factory.• GALVANIZING -Contact Factory •1.9”Dia. x 16 Ga. lvan z Roll r (R rs on 3 Ce ter in 1/2 ” x 12 G C Fr me •25- 4 FPMset on I te at M t C n r •24 Volt DCm s wit i egrated m control c m un e n • 316 in. D a o yu eth R e Tread Rolers from Motor•40AMP DCPower Sup ly , 28Vol Fixe Output. ax mum 0 M o pe S. Requires 1 or i voltage, AM Input e of Co e o •Less Floor Su o ts •2 1/2 ” Di . Gal Tapered t 1 1/16 ” x 14 Ga R l 1/2 ” x 12 G C a ne •(2 2Volt Dm t rs wi h i egra m c nt ol ar i o DCm w i gr on d 30º .•25- 54 FPM, set on Integ ate MControl er •M s m unted o i side of channel •Power Sup ly N t I clud d •Le s Fl or S o t ROutSped, FPMD T CTSTPE OW34563517425OF330164240ONF31154225ONF290144211ONF27013496ONF25012482ONFNF23011467ONF21010453ONF19095138ON17085123OFN1507109OFNFN1306594OFN115580OFN9456OFN703251OFN502536O 2 in.Roler CentersSectionLengthBetwen RailWidth9”1”13”15”17”19”21”23”25”27”31”3”37”39”Overal Frame Width12”14”16”18”20”2”24”26”28”30”34”36”40”42”10’-0” OAL Base Price47648024837487249074942497501250485083515351852585294Per Fot Price275.0278.60282.10285.60289.10292.60296.1029.60303.20306.70313.70317.20342.20327.80 NOTE : • Base Price Includes 40 amp DC power suply formotors.