10072020_PriceList_1.1

138-ACC

Horizontal Power Conveyor (Accumulating Type)

PRICES FOR COMPLETE CONVEYOR INCLUDE: • 1 3/8 ” Dia. x 18 Ga. Galvanized Roller with 5/16 ” Hex Shafts (Rollers on 1 1/2” Centers) in a 6 1/2 ” x 12 Ga. Channel Frame • Driving V-Belt • “C” Face Speed Reducer–Sealed Worm Gear • 1/2 HP–“C” Face Totally Enclosed Motor (Specify Exact Voltage)

• Totally Enclosed Chain Guard • 65 FPM Constant Conveying Speed • End Guards • Less Electrical Controls • Less Floor Supports

Conveyor shown with optional floor supports

SIZE TO ORDER Overall Length "A"

Between Rail Width

10"

13"

16"

22"

Overall FrameWidth

12"

15"

18"

24"

5'

2354 3109 3863 4618 5372 6127 6881 7636 8390 9145 9899

2420 3214 4008 4802 5596 6390 7184 7978 8772 9566

2486 3320 4153 4987 5820 6654 7487 8321 9154 9988

2618 3531 4444 5357 6270 7183 8096 9009 9922

10' 15' 20' 25' 30' 35' 40' 45' 50' 55' 60' 65' 70' 75' 80' 85' 90' 95'

10835 11748 12661 13574 14487 15400 16313 17226 18139 19052 19965

10360 11154 11948 12742 13536 14330 15124 15918 16712 17506

10821 11655 12488 13322 14155 14989 15822 16656 17489 18323

10654 11408 12163 12917 13672 14426 15181 15935 16690

Conveyor sections are easily coupled together at either end to make up to 100 ft. long units. Drive is usually located at center of conveyor length.

100'

IMPORTANT NOTES

• NON-STANDARD WIDTHS Contact factory for lead time.

• OTHER LENGTHS Other lengths not listed in price chart are available. For “IN-BETWEEN SIZES”, use next larger Overall Length“A”price. SEE BED LENGTHS BELOW.

• INTERMEDIATE BEDS Use per foot price of width x required length, supports not included.

• BED LENGTHS Intermediate bed sections are available in multiples of 4’, 5’, 6’, 7 1/2’, 8’, and 10’lengths only.

• DRIVE LOCATION Drive is mounted in approximate center of conveyor length on multiple bed lengths only.

• STANDARD WIDTHS All standard widths to be offered in 1 FOOT length increments beginning at 10’OAL.

• MAXIMUM LENGTH Maximum Overall Length“A”is 100’with one (1) Drive.

• OTHER WIDTHS For“IN-BETWEENWIDTHS”, use next width plus 10%. For widths up to 30”OAW, interpolate plus 10%. For widths over 30”OAW, contact factory for lead time.

• FLOOR SUPPORTS Floor Supports are not included in base price. There are two (2) stationary floor supports required for the first bed section and one (1) support required per bed section thereafter.

• OPTIONAL EQUIPMENT

•

MOTORS Extra Motor Price for OTHER THAN: 1/2 HP–208/230/460/575 V–3 Ph.–60 Hz.–Totally Enclosed. Speed affects horsepower requirements.

TOTALLY ENCLOSED

PREMIUM ENERGY EFFICIENT

200 / 208 / 230 / 460/ 575 V 3 Ph. - 60 Hz.

115 / 230 V 1 Ph.- 60 Hz.

230/460 V 3 Ph.- 60 Hz.

575 V 3 Ph.- 60 Hz.

H.P. REQ

1/2

N/C N/A N/A

25.70 93.80 790.60

262.60 326.30 636.90

262.60 326.30 636.90

1 2

PRICELIST | 07112019