10072020_PriceList_1.1

138-ACC

• OPTIONAL EQUIPMENT (CONTINUED)

• CONSTANT AND VARIABLE SPEEDS Constant C-Face–Within 25-90 FPM........................No Charge Variable Speed............................See AC Variable Speed Drives NOTE : Speeds other than 65 FPM will drastically affect accumulation feature. Speeds above 120 FPM NOT RECOMMENDED. • DRIVE COMPONENT DEDUCTS Less Motor Drive, Motor Mount and Guards, but with Shaft Extension.........Deduct.................................................504.80 Less Motor Only (1/2 HP-208/230/460/575V-3 Ph.-60 Hz.).......................... Deduct.........................................187.80 Less Reducer*.......... Deduct.........................................223.50 *Less V-Belt Guard, Chain Guard, sheaves and sprockets when V-Belt drive is supplied. Less chain guard and sprockets when C-Face drive is supplied. • SLAVE CONNECTION KIT For Slave Driving existing curves...................................148.20 (Please Provide Sketch) Raised Roller End Stop 2 1/8”Dia. Roller 10”to 22”Between Rail Width........................................51.50 Hand Operated Stop (Blade or Roller Types, specify) 10”to 22”Between Rail Width......................................342.60 Air Operated Linear Thruster Stop (Pin, Roller or Blade Types, specify) 13”to 22”Between Rail Width................................... 1082.00 NOTE : Filter Regulator Unit not supplied as standard. Stops are supplied in NORMALLY DOWN position with SINGLE SOLENOID VALVE. Can be supplied in NORMALLY UP position. Can also be supplied with DOUBLE SOLENOID VALVE. Contact Factory. • PACKAGE STOPS Angle End Stop 1 1/2”x 1 1/2”x 12 Ga. Steel 10”to 22”Between Rail Width........................................20.20

• GUARD RAILS NOTE : Available in 5’and 10’lengths only from Stockyard. Contact factory for other lengths. Adjustable Universal Channel Guard Rail Both Sides......................................per foot......................9.90 One Side.........................................per foot......................5.00

• FLOOR SUPPORTS Not Included in Base Price. Use Chart Below for Required Elevation. "LS" SUPPORT Model No. Adjustment to Top of Roller

Price Each 38.30 38.30 38.30 38.30 38.30 38.30 39.50 43.50 50.10 52.30 57.70 85.20 97.30

LSL-1* LSL-2* LSL-3* LS-1* LS-1.2* LS-1.4* LS-2*

8 3/4" to 9 3/4" 9 3/4" to 11 1/2" 11 1/2" to 14 1/8" 14 1/16" to 15 13/16" 15 1/16" to 16 13/16" 16 1/16" to 17 13/16" 17 1/16" to 20 1/16" 19 11/16" to 22 11/16" 22 11/16" to 28 11/16" 26 11/16" to 32 11/16" 30 11/16" to 42 11/16" 40 11/16" to 52 11/16" 52 11/16" to 64 11/16" 64 11/16" to 76 11/16" 76 11/16" to 88 11/16" 86 11/16" to 98 11/16" 98 11/16" to 110 11/16"

Angle Type Types“A”or“B”available (specify). Prices are for both sides.

LS-3 LS-4 LS-5 LS-6 LS-7 LS-8 LS-9

Type“A” 1”x 1”x 12 Ga.................................per foot......................5.00

Type“B”(See NOTE ) 1”x 1”x 12 Ga.................................per foot......................6.00

106.60 121.50 134.40

LS-10 LS-11 LS-12

Fixed Channel Type (Prices are for both sides.) 2 1/2”x 1”x 12 Ga.............................per foot......................9.80

140.60 * Less than 18”top of roller elevation– Side Mounted Drive Required. NOTE : LS-7 to LS-12: Knee Braces included in price. Extra Knee Braces ....... per pair....................................... 19.00 • LOW ELEVATION Low Elevation Sheave Retainer Bracket to provide 9 1/2” elevation. (Side mounted drive required. See Optional Drives.) Add-on per .......... Sheave Retainer Bracket.................. 109.70

NOTE : If product comes in contact with guard rails, product flow will be affected.

• REPLACEMENT BED Intermediate Beds—When ordering replacement intermediate bed sections, use per foot price of appropriate bed width shown in price chart. Tail Bed—When ordering replacement tail bed sections, add an additional................................................................353.00

• TRAFFIC COP- See Conveyor Accessories.

• CEILING HANGERS- See Ceiling Hangers

• TURNING WHEEL- See Conveyor Accessories.

• POLY-TIER SUPPORTS- See Poly-Tier Support Pricing.

• ELECTRICAL CONTROLS- See Electrical Controls.

• POSITIVE DRIVE

• GALVANIZING- Contact Factory

(Add-on per foot of conveyor) 1 1/2”Roller Centers.......................................................... 58.10

• OPTIONAL DRIVES Drive Type

OVERALL FRAMEWIDTH 12" to 24"

Underside Drive (V-Belt) Side Mounted (C-Face)*

161.40 243.00

• ABEC BEARINGS (019.204) Per foot add-on. Between Rail Width 10"

*9 1/2”minimum elevation #50 O-Ring Drive Chain........................Add.................. 186.30 #60 O-Ring Drive Chain........................Add.................. 266.00

13"

16"

22"

Overall Frame Width Add Per Foot of Conveyor 1 1/2" Centers

12"

15"

18"

24"

39.70 39.70 39.70 39.70

PRICELIST | 01022019