10072020_PriceList_1.1

ABEZ

Horizontal Power Conveyor (Zero Pressure Accumulating Type)

PRICES FOR COMPLETE CONVEYOR INCLUDE: • 1.9” Dia. x 16 Ga. Galvanized Roller (Rollers on 3” Centers) in a 6 1/2 ” x 12 Ga. Channel Frame • Accumulation Zones with EZLogic® Accumulation System. EZ-Logic® Zone Controller NEMA 1, 2, IP62. UL Approved. • 6 in Black TMPH90MFOXB • “C” Face Speed Reducer–Sealed Worm Gear • 1/2 HP–“C” Face Totally Enclosed Motor (Specify Exact Voltage)

• Totally Enclosed Chain Guard • 65 FPM • End Guards

Conveyor shown with optional floor supports

• Filter/Regulator for Main Air Supply Line • 27 VDC, 100 Watt Power Supply for Zone Controllers (Requires 120 VAC or 230 VAC), Single Phase Input

• Less Motor Controls • Less Floor Supports

NOTE : Pushbutton Programmer or Programming Kit for PC NOT INCLUDED in listed price. See EZLogic® Components pages for information and pricing.

U.S. Patent Numbers 5,862,907 • 7,243,781 • 7,591,366 Other Patents Pending.

Between Rail Width Overall FrameWidth

15" 18"

17" 20"

19" 22"

21" 24"

23" 26"

25" 28"

27" 30"

31" 34"

33" 36"

37" 40"

39" 42"

3" Centers 10' Length-O.A.

3973

4033

4093

4153

4214

4274

4333

4453

4513

4633

4693

Per Foot Price

86

90

93

97

99

102

106

112

116

122

126

Add for each Accum Zone 2" Centers 10' Length-O.A.

224.10

4377

4430

4483

4536

4590

4643

4696

4803

4856

4963

5016

Per Foot Price

118

122

126

130

134

137

141

149

153

161

165

Add for each Accum Zone

224.10

NOTE : Section lengths are limited to the following zone multiples ONLY: 12”Zones – 2’, 3’, 4’, 5’, 6’, 7’, 8’, 9’& 10’ 18”Zones - 1 1/2’, 3’, 4 1/2’, 6’, 7 1/2’& 9’

24”Zones – 2’, 4’, 6’, 8’& 10’ 30”Zones – 2 1/2’, 5’, 7 1/2’& 10’ 36”Zones – 3’, 6’& 9’

48”Zones – 4’& 8’ 60”Zones – 5’& 10’ 72”Zones – 6’ 84”Zones-7’ 96”Zones – 8’ 120”Zones – 10’ NOTE : Other zone lengths available. Contact factory for lead time. PRICING EXAMPLE: 10’-0”OAL x 18”OAWWith 3”Roller Centers And (5) 24” Long Zones With MS-6 Supports BASE 10’-0”Price ................................................... 3973.00 (5) Zones x 224.10............................................... 1120.50 (2) MS-6 Supports.............................................. 115.40 .................................................................................5208.90

NOTE : Total specification of product is required; product is recommended for testing. Product footprint may affect drive capacity.

IMPORTANT NOTES

• OTHER WIDTHS For “IN-BETWEEN WIDTHS”, use next width plus 10%. For widths above 42”OAW and up to 62” OAW, interpolate plus 20%. For widths above 62” OAW, contact factory for lead time. All non- standard widths, contact factory for lead time. • FLOOR SUPPORTS Floor Supports are not included in base price.There are two (2) stationary floor supports required for the first bed section and one (1) support per bed section thereafter.

• OTHER LENGTHS For lengths longer than 10’-0”add per foot price of width x additional length to base price + zone price x total number of zones.

NOTE : OAL must be divisible by zone length. Zone length must be divisible by roller centers.

NOTE : Lengths over 100’OAL, high performance center drive required.

NOTE : Speeds above 120 FPM will affect product accumulation, and product drift may occur. Contact factory for speed above 120 FPM.

Loads over 75 lbs per foot - 140 SD Belt Required.

PRICELIST | 11042019