10072020_PriceList_1.1

ABEZ

• OPTIONAL EQUIPMENT

•

OPTIONAL DRIVE Unified Drives: (Shaft Mounted) Unified Drives:

• CEILING HANGERS- See Ceiling Hangers

• SET LOW ( 2” ROLLER CENTERS) Retroreflective Diffuse through side channel only

16”to 28” 30”to 42” Center Drive 8”Drive Pulley with 075 Reducer 177.40 177.40 Center Drive 8”Drive Pulley with 090 Reducer 301.00 301.00 8”Drive Pulley Speed FPM 65 78 97 130 156 195 260 389 Max HP 1 1,2* 1 2 2 2 2 2** * Reducer size increases with 2 HP. **Contact Factory. Drive Type 161.40 161.40 Low Elevation Side Mounted Center (C-Face) 243.00 315.80 Low Elevation Side Mounted Center (V-Belt) 404.50 477.10 Center Drive with Extended Take-Up C-Face 127.40 191.00 Center Drive with Extended Take-Up V-Belt 288.70 352.40 High Performance Center Drive (C-Face) 499.20 611.40 Heavy Duty Center Drive (C - Face) 241.40 258.30 Shaft Mounted Center Drive 440.10 567.60 #50 O-Ring Drive Chain........................Add...............186.30 #60 O-Ring Drive Chain........................Add...............266.00 OVERALL FRAMEWIDTH 16" to 28" 30" to 42" Center Drive (V-Belt)

• POLY-TIER SUPPORTS- See Poly-Tier Support Pricing.

• GUARD RAILS Adjustable Universal Channel Guard Rail

Both Sides................ per foot......................................... 23.30 One Side................... per foot..........................................11.80 NOTE : For Diffuse or Retro-Reflective.

Fixed Channel Type - Overlapping (One Direction) (Prices are for both sides.)

3 1/2”x 1 1/2”x 12 Ga.per foot............................................16.80 6 1/2”x 1 1/2”x 12 Ga.per foot............................................21.30 10”x 1 1/2”x 12 Ga.per foot..............................................28.20 13”x 1 1/2”x 12 Ga.per foot..............................................33.80

NOTE : Fixed Channel Guard Rails are raised with 2”high spacer. 1”high spacers are available. Specify.

• CONSTANT AND VARIABLE SPEEDS Constant C-Face–Within 17-120 FPM......................No Charge Constant V-Belt–Minimum of 4 FPM....................................... .........................................................Use V-Belt Drive Add-On Constant Speeds Below Those Listed Above............................. .......................................................................Contact Factory Variable Speed............................See AC Variable Speed Drives • DRIVE COMPONENT DEDUCTS Less Motor Drive, Motor Mount and Guards, but with Shaft Extension....................................Deduct...................... 504.80 Less Motor Only (1/2 HP-208/230/460/575 V-3 Ph.-60 Hz.)...... ..................................................Deduct...................... 187.80 Less Reducer*.............................Deduct...................... 223.50 *Less V-Belt Guard, Chain Guard, sheaves and sprockets when V-Belt drive is supplied. Less chain guard and sprockets when C-Face drive is supplied. • FULL ZONE BRAKING 18”Long Zone.............................Per Zone.......................26.70 24”Long Zone.............................Per Zone.......................44.30 30”Long Zone.............................Per Zone.......................71.00 36”Long Zone.............................Per Zone.......................88.80 48”Long Zone.............................Per Zone.....................133.10 60”Long Zone.............................Per Zone.....................166.50 NOTE : Contact Factory for Zones over 60”. • LESS BRAKES Deduct per Zone............................................................ 10.00 • COVERS 10’-0”Long Smoke Cover (036.0902)........................................ ......................................................... each....................102.30 10’-0”Long Gray Cover (036.090)............................................. ......................................................... each......................69.90 10’-0”Long Clear Cover (036.0901).......................................... ......................................................... each....................112.80 10’-0”Long Smoke Cover set low(036.0925)............................ ......................................................... each....................106.40 End cap (036.091).................................................................... ......................................................... each........................7.50 NOTE : Covers not supplied as standard equipment on conveyor.

• MOTORS Extra Motor Price for OTHER THAN: 1/2 HP–208/230/460/575 V–3 Ph.–60 Hz.–Totally Enclosed. Speed affects horsepower requirements.

NOTE : If product comes in contact with guard rails, product flow will be affected.

• PRESSURE SWITCH- See Electrical Controls.

TOTALLY ENCLOSED

PREMIUM ENERGY EFFICIENT

200 / 208 / 230 / 460 / 575 V 3 Ph. - 60 Hz.

H.P. REQ

115 / 230 V 1 Ph.- 60 Hz.

230/460 V 3 Ph.- 60 Hz.

575 V 3 Ph.- 60 Hz.

• EZLOGIC®- See EZLogic® Component Page

1/2 N/C

25.70 93.80 790.60

262.60 326.30 636.90

262.60 326.30 636.90

• DIFFUSE ZONE CONTROLLERS Add Per Zone.................................................................19.10 NOTE : Not available on 2”roller centers.

1 2

N/A N/A

3* 5*

1553.90 1697.60

N/A N/A N/A N/A

N/A N/A N/A N/A

N/A N/A N/A N/A

• ELECTRICAL CONTROLS- See Electrical Controls.

3** 2431.40 5** 3287.30

NOTE : * - C-Face Right Angle Chain Driven Gear Motors. **- Shaft Mounted Gear Motors. • OVER 50 ZONES Additional IOP Required. (See Chart Below). Part No. Description

• GALVANIZING- Contact Factory

List Price 629.50

032.582 032.562 032.559 032.570

IOP

Power Isolation Cable Power Supply T Cable IOP Isolation Cable

42.30 69.90 42.30

• FLOOR SUPPORTS Not Included in Base Price. Use Chart Below for Required Elevation. "MS" SUPPORT Model Adjustment to Price No. Top of Roller Each *MSL-1 8 3/4" to 9 3/4" 38.30 *MSL-2 9 3/4" to 11 1/2" 38.30 *MSL-3 11 1/2" to 14 1/8" 38.30 * MS-1 13 3/4" to 15 1/2" 38.30 *MS-1.2 14 3/4" to 16 1/2" 38.30 * MS-1.4 15 3/4" to 17 1/2" 38.30 * MS-2 16 3/4" to 19 3/4" 39.50 MS-3 19 3/8" to 22 3/8" 43.50 MS-4 22 3/8" to 28 3/8" 50.10 MS-5 26 3/8" to 32 3/8" 52.30 MS-6 30 3/8" to 42 3/8" 57.70 MS-7 40 3/8" to 52 3/8" 85.20 MS-8 52 3/8" to 64 3/8" 97.30 MS-9 64 3/8" to 76 3/8" 106.60 MS-10 76 3/8" to 88 3/8" 121.50 MS-11 86 3/8" to 98 3/8" 134.40 MS-12 98 3/8" to 110 3/8" 140.60 *Less than 21 3/4”top of roller elevation–

Low Elevation-Side Mounted Center Drive Required. NOTE : MS-7 to MS-12: Knee Braces included in price. Extra Knee Braces ....... per pair.......................................19.00

• SET LOW ( 3” ROLLER CENTERS) Retroreflective Diffuse through side channel only

PRICELIST | 01022019