10072020_PriceList_1.1

First page Previous page 140 Next page Last page

190-NSPEZ

Horizontal Power Conveyor (Zero Pressure Accumulating Type)

PRICES FOR COMPLETE CONVEYOR INCLUDE: • 1.9” Dia. x 16 Ga. Galvanized Roller (Rollers on 3” Centers) in a 9 1/2 ” x 12 Ga. Channel Frame • Accumulation Zones with EZ-Logic® Accumulation System. EZ-Logic® Zone Controller NEMA 1, 2, IP62. UL Approved. • “C” Face Speed Reducer–Sealed Worm Gear • 1/2 HP–“C” Face Totally Enclosed Motor (Specify Exact Voltage)

• Totally Enclosed Chain Guard • 65 FPM

• Filter/Regulator for Main Air Supply Line • 27 VDC, 100 Watt Power Supply for Zone Controllers (Requires 120 VAC or 230 VAC), Single Phase Input

Conveyor shown with optional floor supports

• Less Motor Controls • Less Floor Supports

NOTE : Pushbutton Programmer or Programming Kit for PC NOT INCLUDED in listed price. See EZLogic® Components pages for information and pricing.

U.S. Patent Numbers 5,862,907 • 7,243,781 • 7,591,366 Other Patents Pending.

Between Rail Width Overall FrameWidth

13" 16"

15" 18"

17" 20"

19" 22"

21" 24"

23" 26"

25" 28"

27" 30"

31" 34"

33" 36"

37" 40"

39" 42"

*3" Centers 10' Length-O.A. Per Foot Price Add for each Accum Zone *2" Centers 10' Length-O.A. Per Foot Price Add for each Accum Zone

3085 3133 3182 3232 3282 3331 3381 3430 3529 3578 3677 3726 94 96 98 101 103 104 106 108 113 115 119 121 3370 3413 3456 3501 3534 3587 3631 3674 3762 3805 3893 3936 126 131 135 138 142 147 151 155 163 167 174 179 224.10

224.10

NOTE : Other zone lengths available. Contact factory for lead time. Section lengths are limited to the following zone multiples ONLY: 12”Zones – 1’, 2’, 3’, 4’, 5’, 6’, 7’, 8’, 9’& 10’ 30”Zones – 2 1/2’, 5’, 7 1/2’& 10’ 18”Zones - 1 1/2’, 3’, 4 1/2’, 6’, 7 1/2’& 9’ 36”Zones – 3’, 6’& 9’ 24”Zones – 2’, 4’, 6’, 8’& 10’

IMPORTANT NOTE

• Operating NSPEZ in sleep mode is not recommended. NOTE : Total specification of product is required; product is recommended for testing. Product footprint may affect drive capacity.

PRICING EXAMPLE: 10’-0”OAL x 16”OAWWith 3”Roller Centers And (5) 24”Long Zones With MS-6 Supports BASE 10’-0”Price ................................................... 3085.00 (5) Zones x 224.10............................................... 1120.50 (2) MS-6 Supports.............................................. 115.40 .................................................................................4320.90

IMPORTANT NOTES

NOTE : Speeds above 120 FPM will affect product accumulation, and product drift may occur. Contact factory for speed above 120 FPM.

• FLOOR SUPPORTS Floor Supports are not included in base price. There are two (2) stationary floor supports required for the first bed section and one (1) support per bed section thereafter.

• OTHER LENGTHS For lengths longer than 10’-0” add per foot price of width x additional length to base price + zone price x total number of zones.

• OTHER WIDTHS For “IN-BETWEEN WIDTHS”, use next width plus 10%. For widths above 42” OAW and up to 54” OAW, interpolate plus 10%. For widths above 54”OAW, contact factory for lead time. All non-standard widths, contact factory for lead time.

NOTE : OAL must be divisible by zone length.

Zone length must be divisible by roller centers.

190-NSPEZC

Live Roller Curve Conveyor (Zero Pressure Accumulating Type) (Less Drive)

• 2 1/2 ” Dia. Galvanized Tapered to 1 11/16 ” Dia. x 14 Ga Roller in 9 1/2 ” x 12 Ga. Channel • Slave Driven from 190-NSPEZ PRICES FOR COMPLETE CONVEYOR INCLUDE:

• (2) Accumulation Zones in Each Curve with EZLogic® Accumulation System • Less Floor Supports

U.S. Patent Numbers 5,862,907 • 7,243,781 • 7,591,366 Other Patents Pending.

NOTE : Total specification of product is required; product is recommended for testing. Product footprint may effect drive capacity.

IMPORTANT NOTE

• OTHER WIDTHS Contact factory for “IN-BETWEEN WIDTHS,” and widths over 42”OAW • NON-STANDARD WIDTHS WITH STANDARD INSIDE RADIUS Contact factory for lead time.

Between Rail Width 13" Overall FrameWidth 16"