10072020_PriceList_1.1

190-NSPEZ

• MOTORS Extra Motor Price for OTHER THAN: 1/2 HP–208/230/460/575 V–3 Ph.–60 Hz.–Totally Enclosed. Speed affects horsepower requirements. • OPTIONAL EQUIPMENT

• GUARD RAILS (NSPEZ) Adjustable Universal Channel Guard Rail.................................. Both Sides................ per foot..........................................23.30 One Side................... per foot..........................................11.80

• CONSTANT AND VARIABLE SPEEDS Constant C-Face–Within 30-120 FPM........................No Charge Variable Speed. See AC Variable Speed Drives

PREMIUM ENERGY EFFICIENT

EURODRIVE GEARMOTOR (REQUIREDWITH LOW ELEVATION DRIVE)

TOTALLY ENCLOSED

Fixed Channel Type - Non-Overlapping (Reversing) (Prices are for both sides.)

H.P. REQ

H.P. REQ

200 / 208 / 230 / 460 / 575 V 3 Ph. - 60 Hz.

115 / 230 V 1 Ph.- 60 Hz.

230/460 V 3 Ph.- 60 Hz.

575 V 3 Ph.- 60 Hz.

208/230/460/575 V 3 Ph.- 60 Hz.

3 1/2”x 1 1/2”x 12 Ga .............................per foot................14.80 6 1/2”x 1 1/2”x 12 Ga..............................per foot................17.60 10”x 1 1/2”x 12 Ga................................per foot................25.00 13”x 1 1/2”x 12 Ga................................per foot................30.20

1/2

N/C N/A N/A

25.70 93.80 790.60

262.60 326.30 636.90

262.60 326.30 636.90

3/4

929.60 1002.40 1105.10

1 2

1

1 1/2

• OVER 50 ZONES Additional IOP Required. (See Chart Below). Part No. Description

• TIMING BELT DRIVE Required with speeds above 120 FPM....................................... Add-On...........................................................................695.30 • DRIVE COMPONENT DEDUCTS Less Motor Drive, Motor Mount, Sprockets and Guards, but with Drive Shaft......................................... Deduct................504.80 Less Motor Only (1/2 HP-208/230/460/575 V-3 Ph.-60 Hz.).................................................... Deduct................187.80 Less Reducer...................................... Deduct................223.50 (Chain Guard and Sprockets Not Supplied) • O-RING DRIVE CHAIN # 50 Chain Speeds up to 120 FPM....................... Add-On...............186.30 #60 CHAIN Speeds up to 120 FPM ....................... Add-On...............266.00 • CROSSOVER Chain Speeds up to 120 FPM....................... Add-On...............546.20 #50 O-Ring Chain Speeds up to 120 FPM....................... Add-On...............761.10 Timing Belt Speeds above 120 FPM...................... Add-On.............1516.50 1 1/2”x 1 1/2”x 12 Ga. Steel 13”to 25”Between Rail Width.........................................20.20 27”to 39”Between Rail Width.........................................32.20 Air Operated Linear Thruster Stop (Pin, Roller, or Blade Types, specify) 13”to 39”Between Rail Width.....................................1082.00 NOTE : Filter Regulator Unit not supplied as standard. Stops are supplied in NORMALLY DOWN position with SINGLE SOLENOID VALVE. Can be supplied in NORMALLY UP position. Can also be supplied with DOUBLE SOLENOID VALVE. Contact Factory. • COVERS 10’-0”Long Gray Cover (036.090)...... each......................69.90 10’-0”Long Clear Cover (036.0901)... each....................112.80 End cap (036.091)............................. each........................7.50 NOTE : Covers not supplied as standard equipment on conveyor. • PACKAGE STOPS Angle End Stop

Fixed Channel Type - Overlapping (One Direction) (Prices are for both sides.)

List Price 629.50

3 1/2”x 1 1/2”x 12 Ga..............................per foot................16.80 6 1/2”x 1 1/2”x 12 Ga..............................per foot................21.30 10”x 1 1/2”x 12 Ga................................per foot................28.30 13”x 1 1/2”x 12 Ga................................per foot................33.80 Type“A” 1 1/2”x 1 1/2”x 12 Ga... per foot........................................... 5.00 Type“B”(See NOTE ) 1 1/2”x 1 1/2”x 12 Ga... per foot........................................... 5.00

032.582 032.562 032.559 032.570

IOP

Power Isolation Cable Power Supply T Cable IOP Isolation Cable

42.30 69.90

42.30 NOTE : When using I/O Boards in both IOPs, 032.562 should be replaced with 032.570 IOP Isolation Cable.

• PRESSURE SWITCH- See Electrical Controls.

• FLOOR SUPPORTS Not Included in Base Price. Use Chart Below for Required Elevation. "MS" SUPPORT Model No. Adjustment to Top of Roller Price Each

NOTE : If product comes in contact with guard rails, product flow will be affected.

• GUARD RAILS (190-NSPEZC) Adjustable Universal Channel Guard Rail....90°, 60°, 45°, & 30° Both Sides.....................................................................147.00 Outside Only....................................................................99.10 Inside Only......................................................................65.20

MSL-1* MSL-2* MSL-3* MS-1* MS-1.2* MS-1.4* MS-2* MS-3*

11 3/4" to 12 3/4" 12 3/4" to 14 1/2" 14 1/2" to 17 1/8" 16 3/4" to 18 1/2" 17 3/4" to 19 1/2" 18 3/4" to 20 1/2" 19 3/4" to 22 3/4" 22 3/8" to 25 3/8" 25 3/8" to 31 3/8" 29 3/8" to 35 3/8" 33 3/8" to 45 3/8" 43 3/8" to 55 3/8" 55 3/8" to 67 3/8" 67 3/8" to 79 3/8" 79 3/8" to 91 3/8" 89 3/8" to 101 3/8" 101 3/8" to 113 3/8"

38.30 38.30 38.30 38.30 38.30 38.30 39.50 43.50 50.10 52.30 57.70 85.20 97.30

Angle Type“A” 1 1/2”x 1 1/2”x 12 Ga. 90°, 60°, 45°, & 30°

Both Sides.......................................................................72.70 Outside Only....................................................................43.60 Inside Only......................................................................28.40

MS-4 MS-5 MS-6 MS-7 MS-8 MS-9

Angle Type“B”- Diffuse Only 1 1/2”x 1 1/2”x 12 Ga. 90°, 60°, 45°, & 30°

106.60 121.50 134.40

MS-10 MS-11 MS-12

140.60 *Less than 24”top of roller elevation–Low Elevation Drive Required.

Both Sides.......................................................................89.80 Outside Only....................................................................57.00 Inside Only......................................................................33.10

Fixed Channel Type - Diffuse Only 3 1/2”x 1 1/2”x 12 Ga. 90°, 60°, 45°, & 30°

NOTE : MS-7 to MS-12: Knee Braces included in price.

Extra Knee Braces ................................ per pair..............19.00 Single Center Leg (MSC-6 and below) each................... 39.50 Single Center Leg (MSC-7 and above) each.................... 49.20

Both Sides.....................................................................143.50 Outside Only....................................................................90.70 Inside Only......................................................................53.50 NOTE : Angle Type A and Fixed Channel Guard Rails are raised with 2”high spacer. 1”high spacers also available. Specify.

• CEILING HANGERS- See Ceiling Hangers

• POLY-TIER SUPPORTS- See Poly-Tier Support Pricing.

NOTE : If product comes in contact with guard rails, product flow will be affected.

• OPTIONAL DRIVES Drive Type

OVERALL FRAMEWIDTH

• EZLOGIC®- See EZLogic® Component Page

20" to 24"

26”to 42”

• ELECTRICAL CONTROLS- See Electrical Controls.

Low Elevation*

177.40

221.80

• DIFFUSE ZONE CONTROLLERS Add Per Zone.................................................................19.10 NOTE : Not available on 2”roller centers.

16”to 24”

26”to 42”

• GALVANIZING- Contact Factory

Side Mounted

177.40

221.80

* NOTE : 11 1/4”minimum elevation Requires Eurodrive Gearmotor (See Motor Chart)

PRICELIST | 01022019