10072020_PriceList_1.1

CRB

Horizontal Belt Conveyor

PRICES FOR COMPLETE CONVEYOR INCLUDE: • End Drive, Located on Discharge End of Conveyor, Chain Guard on Left Hand Side When Standing at Infeed Looking Toward Discharge • Black Trackmate 533 COS • 2” Dia. x 12 Ga. Roller Mounted in 10 Ga. Formed Frame • “C” Face Speed Reducer–Sealed Worm Gear

• 1 HP–“C” Face Premium Energy Efficient Motor (Specify Exact Voltage) • Totally Enclosed Chain Guard • 65 FPM Belt Speed • Less Electrical Controls • Less Floor Supports

Conveyor shown with optional floor supports

Belt Widths

12"

14"

16"

18"

20"

24"

30"

Roller Centers

Between Rail Widths

Overall Length

9"

11"

13"

15"

17"

21"

27"

Overall FrameWidths

16"

18"

20"

22"

24"

28"

34"

10'

6"

3858 141.00 3764 131.00

4081 149.00 3983 140.00

4303 158.00 4202 149.00

4526 167.00 4420 158.00

4749 175.00 4639 167.00

5193 194.00 5077 184.00

5861 220.00 5733 211.00

Price Per Ft.

10'

12"

Price Per Ft.

IMPORTANT NOTES

• NON-STANDARD WIDTHS Contact factory for lead time.

• OTHER LENGTHS Use 10’overall length, add extra PER FOOT to base price.

• INTERMEDIATE BEDS Use per foot price of width x required length, supports not included.

• OTHER WIDTHS For “IN-BETWEEN WIDTHS”, use next largest plus 10%. For widths over 34” OAW, contact factory for lead time.

• FLOOR SUPPORTS Floor Supports are not included in base price. There are two (2) stationary floor supports required for the first bed section and one (1) support required per bed section thereafter.

• OPTIONAL EQUIPMENT

•

OPTIONAL DRIVES Drive Type

BEDWIDTHS 16" - 34"

End Drive (C-Face) End Drive (V-Belt)

N/C

161.40

•

MOTORS Extra Motor Price for OTHER THAN: 1 HP–208/230/460/575 V–3 Ph.–60 Hz.–Premium Energy Efficient. Speed affects horsepower requirements.

PREMIUM ENERGY EFFICIENT

TOTALLY ENCLOSED

BRAKE MOTORS

Holding Brake 208/230/ 460/575 V 3 Ph.- 60 Hz.

Cycling Brake 208/230/ 460/575 V 3 Ph.- 60 Hz. 1238.90* 1586.30*

Cycling Brake 208/230/ 460/575 V 3 Ph.- 60 Hz. 2390.00** 2554.80**

Holding Brake 115/230 V 1 Ph.- 60 Hz.

200 / 208 / 230 / 460 / 575 V 3 Ph. - 60 Hz.

115 / 230 V 1 Ph.- 60 Hz.

H.P. REQ

1 2

N/C

54.80 748.20

688.70 1074.20

798.70

613.70 2066.60 * NOTE : “Cycling Brakemotors”are used for indexing and are rated for 30 cycles per minute. Add-On Prices Include 5AC Reducer, Heavy Duty Motor Base Plate, and #60 Chain and Sprockets with Taper Bushed Hubs. ** NOTE : “Cycling Brakemotor”Add-On Prices Include 5AC Reducer, Heavy Duty Motor Base Plate and Timing Belt Drive. NOTE : Holding Brake Motors are NOT rated for cycling.

PRICELIST | 01022019