10072020_PriceList_1.1

CRB

• OPTIONAL EQUIPMENT (CONTINUED)

• CONSTANT AND VARIABLE SPEEDS Constant C-Face–Within 17-135 FPM with 1 HP and 4AC Reducer...................................................................No Charge Constant V-Belt–Minimum of 4 FPM....................................... ........................................................Use V-Belt Drive Add-On Constant Speeds Below Those Listed Above............................. .......................................................................Contact Factory Variable Speed............................See AC Variable Speed Drives Maximum Speed......................................................... 65 FPM • DRIVE COMPONENT DEDUCTS Less Motor Drive, Motor Mount and Guards, but with Shaft Extension................. .....Deduct....................................565.00 Less Motor Only (1 HP-208/230/460/575V-3 Ph.-60 Hz.).......................... Deduct.........................................205.60 Less Reducer*.......... Deduct.........................................223.50 *Less V-Belt Guard, Chain Guard, sheaves and sprockets when V-Belt drive is supplied. Less chain guard and sprockets when C-Face drive is supplied.

• END CAP Mounts to end of Side Guard .................................................. ................................ each...............................................99.50 • BELT SCRAPER (BRUSH TYPE) ..................................204.00 Specify location.

• FLOOR SUPPORTS Not Included in Base Price. Use Chart Below for Required Elevation. "MS" INTERMEDIATE & TAIL SUPPORT Model No. Adjustment to Top of Belt

Price Each 38.30 38.30 38.30 38.30 38.30 38.30 39.50 43.50 50.10 52.30 57.70 85.20 97.30 Price Each 38.30 38.30 38.30 38.30 38.30 38.30 38.30 38.30 38.30 38.30 39.50 43.50 50.10 52.30 57.70 85.20 97.30 106.60 121.50 134.40 140.60 106.60 121.50 134.40

MSL-1 MSL-2 MSL-3 MS-1 MS-1.2 MS-1.4 MS-2 MS-3 MS-4 MS-5 MS-6 MS-7 MS-8 MS-9 MS-10 MS-11 MS-12

6 1/8" to 7 1/8" 7 1/8" to 8 7/8" 8 7/8" to 11 1/2" 11 1/8" to 12 7/8" 12 1/8" to 13 7/8" 13 1/8" to 14 7/8" 14 1/8" to 17 1/8" 16 3/4" to 19 3/4" 19 3/4" to 25 3/4" 23 3/4" to 29 3/4" 27 3/4" to 39 3/4" 37 3/4" to 49 3/4" 49 3/4" to 61 3/4" 61 3/4" to 73 3/4" 73 3/4" to 85 3/4" 83 3/4" to 95 3/4" 95 3/4" to 107 3/4" Adjustment to Top of Belt 10" to 10" 11" to 11" 12" to 12" 13" to 13" 14" to 14" 15" to 15" 16" to 16" 16 9/16" to 18 5/16" 17 9/16" to 19 5/16" 18 9/16" to 20 5/16" 19 9/16" to 22 5/16" 22 1/16" to 25 1/16" 25 1/16" to 31 1/16" 29 1/16" to 35 1/16" 33 1/16" to 45 1/16" 43 1/16" to 55 1/16" 55 1/16" to 67 1/16" 67 1/16" to 79 1/16" 79 1/16" to 91 1/16" 89 1/16" to 101 1/16" 101 1/16" to 113 1/16" "MSD" DRIVE SUPPORT

• ELECTRICAL CONTROLS -See Electrical Controls

• GALVANIZING -Contact Factory

Model No.

*MSD-0-10 *MSD-0-11 *MSD-0-12 *MSD-0-13 *MSD-0-14 *MSD-0-15 *MSD-0-16

*MSD-1 MSD-1.2 MSD-1.4 MSD-2 MSD-3 MSD-4 MSD-5 MSD-6 MSD-7 MSD-8 MSD-9 MSD-10 MSD-11 MSD-12

140.60 NOTE : MS-7 to MS-12 and MSD-7 to MSD-12: Knee Braces included in price. NOTE : Knee Braces are required on incline or decline units with MS-3 or higher supports.

Extra Knee Braces ....... per pair.......................................19.00

• CASTERS -See Casters

• CEILING HANGERS -See Ceiling Hangers

• POLY-TIER SUPPORTS- See Poly-Tier Support Pricing

PRICELIST | 01022019