10072020_PriceList_1.1

25-RBM

Horizontal Belt Conveyor (Roller Bed)

PRICES FOR COMPLETE CONVEYOR INCLUDE: • Center Drive, Located on Left Hand Side of Conveyor When Standing at Infeed Looking at Discharge (Specify Exact Location) • 2.5”Dia. x 11 Ga. Galvanized Roller (Rollers on 3”Centers) in a 6 1/2”x 12 Ga. Channel Frame • “C”Face Speed Reducer–SealedWorm Gear

• 1 HP–“C”Face Totally Enclosed Motor (Specify Exact Voltage) • Totally Enclosed Chain Guard • Green 2-Ply PVC Cover withWhite Side Up • 65 FPM Belt Speed • Less Electrical Controls • Less Floor Support

Conveyor shown with optional floor supports.

Belt Widths

18” 19" 22"

20” 21" 24"

22” 23" 26"

24” 25" 28"

26” 27" 30"

30” 31" 34"

32” 33" 36"

36” 37" 40"

38” 39" 42"

44” 45" 48"

50” 51" 54"

56” 57" 60"

Between Rail Widths Overall FrameWidths

12' Overall Bed Length 12’ Overall Bed Length

10' Bed Length

5565 5845 6126 6406 6686 7247 7527 8087 8368 9208 10049 10889

3”Roller Centers

Price Per Foot

340

357

374

390

408

441

458

492

509

560

611

662

10’ Bed Length

4225 4408 4590 4771 4953 5317 5499 5862 6045 6590 7136 7681

6”Roller Centers

Price Per Foot

228

236

244

253

261

279

287

304

312

337

363

388

IMPORTANT NOTES

• NON-STANDARD WIDTHS Contact factory for lead time.

• OTHER LENGTHS Other lengths not listed in price chart are available. For lengths longer than 12’, use per foot price as an add-on. For lengths shorter than 12’, use per foot price as a deduct. (Belt tracking issues may occur on lengths shorter than 12’.) • OTHER WIDTHS For“IN-BETWEENWIDTHS”, use next width plus 10%. For widths over 60”OAW, contact factory for lead time.

• INTERMEDIATE BEDS Use per foot price of width x required length, supports not included.

• FLOOR SUPPORTS Floor Supports are not included in base price. There are two (2) stationary floor supports required for the first bed section and one (1) support required per bed section thereafter.

PREMIUM ENERGY EFFICIENT TOTALLY ENCLOSED

BRAKE MOTORS

Holding Brake 208/230/ 460/575V 3 Ph.- 60 Hz.

Cycling Brake 208/230/ 460/575V 3 Ph.- 60 Hz. 1238.90* 1586.30*

Cycling Brake 208/230/ 460/575V 3 Ph.- 60 Hz. 2390.00** 2554.80**

Cycling Brake 575V 3 Ph.- 60 Hz.

Cycling Brake 575V 3 Ph.- 60 Hz. 2390.00** 2554.80**

Holding Brake 115/230V 1 Ph.- 60 Hz.

200 / 208 / 230 / 460 / 575V 3 Ph. - 60 Hz.

115 / 230V 1 Ph.- 60 Hz.

H.P. REQ

N/C

54.80 748.20

688.70 1074.20

1238.90* 1586.30*

798.80 2066.60

1 2

613.70

• OPTIONAL EQUIPMENT

•

MOTORS Extra Motor Price for OTHER THAN: 1 HP–208/230/460/575 V–3 Ph.–60 Hz.–Totally Enclosed. Speed affects horsepower requirements. * NOTE : “Cycling Brakemotors”are used for indexing and are rated for 30 cycles per minute. Add-On Prices Include 5AC Reducer, Heavy Duty Motor Base Plate, and #60 Chain and Sprockets with Taper Bushed Hubs. ** NOTE : “Cycling Brakemotor”Add-On Prices Include 5AC Reducer, Heavy Duty Motor Base Plate and Timing Belt Drive. NOTE : Holding Brake motors are NOT rated for cycling.

PRICELIST | 04012019