10072020_PriceList_1.1

PC

Portable Parts Conveyor

PRICES FOR COMPLETE CONVEYOR INCLUDE: • 2-Ply Black Nitrile Belt with 1 1/2 ” High Cleats on 12” Centers • 6 5/8 ” Deep x 12 Ga. Slider Bed with 3 1/2 ” Guard Rails

• “C” Face Speed Reducer–Sealed Worm Gear • 1/2 HP–“C” Face Totally Enclosed Motor (Specify Exact Voltage)

• Totally Enclosed Chain Guard • 65 FPM Constant Belt Speed • Less Electrical Controls

• Overhead End Drive • Portable Base Support

2-Ply Black Nitrile Belt Width

IMPORTANT NOTES

SIZE TO ORDER Overall Length "A"

4"

6"

8"

10"

12"

16"

18"

24"

Bed Length "L"

12 Ga. Steel

• OTHER WIDTHS For “IN-BETWEEN WIDTHS”, contact factory for lead time. • PORTABLE BASE Portable Base Not Supplied on Conveyor Longer than 13’or with Underside Drive. Deduct Portable Base and add MS-Type Floor Supports.

8"

10" Price 2440 2599 2757 2916 3075 79.3

12" Price 2615 2804 2993 3182 3370 94.5

14" Price 2790 3009 3227 3446 3665 109.3

16" Price 2965 3214 3463 3712 3961 124.5

20" Price 3315 3624 3934 4243 4552 154.8

22" Price 3490 3829 4169 4509 4848 169.8

28" Price 4014 4444 4874 5304 5734 215

Price 2265 2394 2522 2650 2779 64.3

5' 7' 9'

4' 6' 8'

11' 13'

10' 12'

Price Per Foot

• OPTIONAL EQUIPMENT LENGTHS OTHER THAN THOSE LISTED ARE (4) WEEK DELIVERY • OPTIONAL BELTS 1/2”x 1”Galvanized Flat Wire Mesh with 1 1/4”High Steel cleats on 12”Centers.......................................................................... ...............................................................No Additional Charge

• NON-STANDARD WIDTHS Contact factory for lead time.

• MOTORS Extra Motor Price for OTHER THAN: 1/2 HP–208/230/460/575 V–3 Ph.–60 Hz.–Totally Enclosed. Speed affects horsepower requirements.

TOTALLY ENCLOSED

PREMIUM ENERGY EFFICIENT

• OPTIONAL DRIVES Drive Type

200 / 208 / 230 / 460 / 575 V 3 Ph. - 60 Hz.

115 / 230 V 1 Ph.- 60 Hz.

230/460 V 3 Ph.- 60 Hz.

575 V 3 Ph.- 60 Hz.

H.P. REQ

BEDWIDTHS

1/2

N/C N/A N/A

25.70 93.80 790.60

262.60 326.30 636.90

262.60 326.30 636.90

8" to 20"

22" to 28"

1 2

Overhead C-Face Overhead V-Belt Underside C-Face* Underside V-Belt

N/C

N/C

161.40 361.90 523.30

161.40 461.30

• HIGHER SIDES

• CONSTANT AND VARIABLE SPEEDS Constant C-Face–Within 17-135 FPM.......................No Charge Constant V-Belt–Minimum of 7 FPM........................................ ........................................................Use V-Belt Drive Add-On Constant Speeds Below Those Listed Above.....Contact Factory Variable Speed............................See AC Variable Speed Drives • DRIVE COMPONENT DEDUCTS Less Motor Drive, Motor Mount and Guards, but with Shaft Extension.................................Deduct......................... 610.20 Less Motor Only (1/2 HP-208/230/460/575V-3 Ph.-60 Hz.)........ ................................................Deduct..........................187.80 Less Reducer*...........................Deduct..........................223.50 *Less V-Belt Guard, Chain Guard, sheaves and sprockets when V-Belt drive is supplied. Less chain guard and sprockets when C-Face drive is supplied. • POWERED FEEDER Prices for Powered Feeder Include: Black Ultimate 140 BBS Belt, Bed, Drive & Tail Pulleys NOTE : Adjustable Floor Supports Not Included In Base Price. NOTE: Overall length of 29 1/2”requires 1 support . Overall length of 44 1/2”or more requires 2 supports NOTE : NO DEDUCT for Feeders less than minimum lengths. Shorter lengths COULD CAUSE IMPROPER BELT TRACKING.

611.40 #50 O-Ring Drive Chain..........................Add............... 186.30 * NOTE : Not Available on 5’OAL Units • FLOOR SUPPORTS Deduct Portable Base and Add Per Support. Specify top of belt elevation. "MS" SUPPORT Model No. Adjustment to Top of Belt Price Each

Sides Higher than 3 1/2”: Add-on per foot both sides

6”..................................................................................... 2.20 9”......................................................................................5.20 12”....................................................................................8.30

• HOPPER .......................................................................442.80

• LARGER DRIVE OR TAIL PULLEY

8" Dia. Drive Pulley in Lieu of 4" Dia.

6" Dia. Tail Pulley in Lieu of 4" Dia.

MSL-1 MSL-2 MSL-3 MS-1 MS-1.2 MS-1.4 MS-2 MS-3 MS-4 MS-5 MS-6 MS-7 MS-8 MS-9 MS-10 MS-11 MS-12

8 3/4" to 9 3/4" 9 3/4" to 11 1/2" 11 1/2" to 14 1/8" 13 3/4" to 15 1/2" 14 3/4" to 16 1/2" 15 3/4" to 17 1/2" 16 3/4" to 19 3/4" 19 3/8" to 22 3/8" 22 3/8" to 28 3/8" 26 3/8" to 32 3/8" 30 3/8" to 42 3/8" 40 3/8" to 52 3/8" 52 3/8" to 64 3/8" 64 3/8" to 76 3/8" 76 3/8" to 88 3/8" 86 3/8" to 98 3/8" 98 3/8" to 110 3/8"

38.30 38.30 38.30 38.30 38.30 38.30 39.50 43.50 50.10 52.30 57.70 85.20 97.30

BedWidths

8" to 12" 14" to 20"

406.20 480.70 535.70 606.60

235.90

22" 28"

• ELECTRICAL CONTROLS- See Electrical Controls.

• GALVANIZING- Contact Factory

106.60 121.50 134.40

140.60 NOTE: MS-3 to MS-12: Knee Braces included in price. Less Portable Base...........................Deduct...................319.00 Knee Braces.....................................Add per pair.............19.00 NOTE : Specify Infeed and Discharge Elevation.

CHAIN DRIVEN TYPE

BELTWIDTHS

4"

6"

8"

10"

12"

16"

18"

24"

Min. Length Overall

29 1/2"

29 1/2"

29 1/2"

29 1/2"

29 1/2"

44 1/2"

44 1/2"

44 1/2"

Price

883.50 938.50 993.50 1048.40 1103.50 1337.50 1396.20 1853.70

Price Per Foot

55.10

60.20

65.60

70.90

76.20

87.00

87.70

110.20

#50 O-Ring Chain on Feeder Slave Connection........................... Add.................................................................................133.20

PRICELIST | 04012019