10072020_PriceList_1.1

PCX

Low Profile Portable Parts Conveyor

PRICES FOR COMPLETE CONVEYOR INCLUDE:

• Black Trackmate #533 COS with 1” High Steel Angle Cleats on 12” Centers • 7 1/4 ” x 12 Ga. Steel Formed Side Channels with Bolted In Slider Bed Providing 1” High Sides Above Belt • Portable Base Support

• “C” Face Speed Reducer–Sealed Worm Gear • 1/2 HP–“C” Face Totally Enclosed Motor (Specify Exact Voltage)

• Totally Enclosed Chain Guard • 25 FPM Constant Belt Speed • Less Electrical Controls

Belt Width

IMPORTANT NOTES

12"

18"

24"

Between Rail Width

Location (See Drawing)

Length Angle Degree

• OTHER WIDTHS For“IN-BETWEENWIDTHS”, use next width plus 10%. For widths over 27 1/8”OAW, contact factory for lead time.

12 1/8"

18 1/8"

24 1/8"

Description

Overall FrameWidth

15 1/8"

21 1/8" 810 1082 1353 1625 1896 2168 2440 2711 272 2354 2557 2828 2933 3136 3341 3543 3747 3951 339

27 1/8" 914 1226 1540 1851 2165 2478 2792 3105 313 2511 2744 3055 3190 3427 3660 3895 4131 4365 392

30" 42" 54" 66" 78" 90"

707 936

• NON-STANDARD WIDTHS Contact factory for lead time.

1169 1398 1628 1858 2087 2319 228 2200 2372 2600 2676 2849 3020 3190 3366 3537 288

Horizontal Tail Assembly

1

102" 114" 36°

Incline Joint Angle

3

2

45° 45" 54" 66"

2

1

Incline Drive Assembly

75" * 84" * 93" * 102" * 111" * 120" *

3

*Less Portable Base Support—See Floor Support Chart for Support Add-On Price.

• OPTIONAL EQUIPMENT • OPTIONAL DRIVES Drive Type BELTWIDTHS 12" to 18" 24" End Drive C-Face N/C N/C End Drive V-Belt 161.40 161.40 Overhead C-Face 361.90 461.30 Overhead V-Belt 523.30 622.20 #50 O-Ring Drive Chain....................... Add..................186.30 • FLOOR SUPPORTS Deduct Portable Base and Add Price for 3 Supports. Specify top of belt elevation. "PCXS" SUPPORT Model No. Adjustment to Top of Belt Price Each

• MOTORS Extra Motor Price for OTHER THAN: 1/2 HP–208/230/460/575 V–3 Ph.–60 Hz.–Totally Enclosed. Speed affects horsepower requirements.

TOTALLY ENCLOSED

PREMIUM ENERGY EFFICIENT

200 / 208 / 230 / 460 / 575 V 3 Ph. - 60 Hz.

115 / 230 V 1 Ph.- 60 Hz.

230/460 V 3 Ph.- 60 Hz.

575 V 3 Ph.- 60 Hz.

H.P. REQ

1/2

N/C N/A

25.70 93.80

262.60 326.30

262.60 326.30

1

• CONSTANT AND VARIABLE SPEEDS Constant C-Face–Within 17-25 FPM........................ No Charge Constant V-Belt–Minimum of 4 FPM......................................... ..................................... Use V-Belt Drive Add-On Constant Speeds Below Those Listed Above.............................. ........................................................................ Contact Factory Variable Speed............... ..............See AC Variable Speed Drives • DRIVE COMPONENT DEDUCTS Less Motor Drive, Motor Mount and Guards, but with Shaft Extension....................... Deduct....................................504.80 Less Motor Only (1/2 HP-208/230/460/575 V-3 Ph.-60 Hz.)........ ...................................... Deduct....................................187.80 Less Reducer*................. Deduct....................................223.50 *Less V-Belt Guard, Chain Guard, sheaves and sprockets when V-Belt drive is supplied. Less chain guard and sprockets when C-Face drive is supplied.

"PCXDS" DRIVE SUPPORT

Model No.

Adjustment to Top of Belt 30 7/8" to 42 7/8" 40 7/8" to 52 7/8" 52 7/8" to 64 7/8" 64 7/8" to 76 7/8" 76 7/8" to 88 7/8" 86 7/8" to 98 7/8" 98 7/8" to 110 7/8"

Price Each 76.80 85.20 97.30 106.60 121.50 134.40 140.60

PCXSL-01 PCXSL-02 PCXSL-03 PCXS-01 PCXS-01.2 PCXS-01.4 PCXS-02 PCXS-03 PCXS-04 PCXS-05 PCXS-06 PCXS-07 PCXS-08 PCXS-09 PCXS-10 PCXS-11 PCXS-12

9 1/4" to 10 1/4" 10 1/4" to 12" 12" to 14 5/8" 14 1/4" to 16" 15 1/4" to 17" 16 1/4" to 18" 17 1/4" to 20 1/4" 19 7/8" to 22 7/8" 22 7/8" to 28 7/8" 26 7/8" to 32 7/8" 30 7/8" to 42 7/8" 40 7/8" to 52 7/8" 52 7/8" to 64 7/8" 64 7/8" to 76 7/8" 76 7/8" to 88 7/8" 86 7/8" to 98 7/8" 98 7/8" to 110 7/8"

38.30 38.30 38.30 38.30 38.30 38.30 39.50 62.70 69.30 71.40 76.80 85.20 97.30

PCXDS-06 PCXDS-07 PCXDS-08 PCXDS-09 PCXDS-10 PCXDS-11 PCXDS-12

106.60 121.50 134.40

140.60 NOTE: PCXS-3 to PCXS-12 AND PCXDS-06 to PCXDS-12: Knee Braces included in price. Less Portable Base............................... Deduct...............99.00

• ELECTRICAL CONTROLS- See Electrical Controls.

• GALVANIZING- Contact Factory

PRICELIST | 01022019