10072020_PriceList_1.1

First page Previous page 83 Next page Last page

25-CRRCT

• FLOOR SUPPORTS Not Included in Base Price. Use Chart Below for Required Elevation. "HSN" SUPPORT Model No. Adjustment to Top of Roller Price Up To 73 1/4”OAW • OPTIONAL EQUIPMENT

• OPTIONAL DRIVES Drive Type

OVERALLWIDTHS

22 1/4" to 34 1/4" 36 1/4" to 54 1/4"

58 1/4 64 1/4" to 70 1/4"

Top Side Mounted C-Face Top Side Mounted V-Belt

Price Above 74 1/4”OAW

338.70

408.00

477.10

HSN-1** 10 1/2" to 12"

61.10 61.50 82.40 84.30 87.20 98.40 124.40 138.80 170.40 182.50 213.70 225.10

61.10 61.50 89.30 94.90 97.60 108.70 149.00 163.10 207.20 218.60 262.60 273.90

HSN-2** HSN-3** HSN-4* HSN-5* HSN-6* HSN-7* HSN-8* HSN-9* HSN-10* HSN-11* HSN-12* HSNC-1** HSNC-2** HSNC-3** HSNC-4* HSNC-5* HSNC-6* HSNC-7* HSNC-8* HSNC-9* HSNC-10* HSNC-11* HSNC-12* Model No.

12”to 15” 15" to 18" 18" to 21" 21" to 24" 24" to 30" 30" to 36" 36" to 48" 48" to 60" 60" to 72" 72" to 84" 84" to 96"

500.20

569.60

638.60

• OPTIONAL FRAME 4”x 5.4 lbs. Structural Channel................................................. . . . . . . . . . . . . . for 30°, 45°, 60°,& 90°..........................164.50 • GUARD RAILS Angle Type“A” 2”x 1 5/8”x 1/4” Side Opposite Chain Guard................ each......................89.60

#50 O-Ring Drive Chain........Add..................................186.30 #60 O-Ring Drive Chain........Add..................................266.00

Under 5’-0”OAL use Top Side Mounted or V-Belt Drive.

• CONSTANT AND VARIABLE SPEEDS Constant C-Face (25-CRRCT)–

Within 20-75 FPM..................................................No Charge V-Belt (25-CRRCT)–Within 6-19 FPM...................................... ...........................................................UseV-BeltDriveAdd-On • DRIVE COMPONENT DEDUCTS Less Complete Motor Drive and Drive Shell (For Slave Driving)...............................Deduct.............................714.10 Less Drive, to be Slave Driven with Jackshaft Slave Connection with #40 Chain....................Deduct.............................478.30 Less Drive, to be Slave Driven with Jackshaft Slave Connection with #50 Chain....................Deduct.............................478.30 Less Drive, to be Slave Driven with Jackshaft Slave Connection with #60 Chain....................Deduct.............................478.30 Less Motor Only (1 HP-208/230/460/575 V-3 Ph.-60 Hz.)......................................Deduct.............................205.60 Less Reducer*......................Deduct.............................223.50 *Less V-Belt Guard, Chain Guard, sheaves and sprockets when V-Belt drive is supplied. Less chain guard and sprockets when C-Face drive is supplied. • TANGENTS Tangent Lengths for 25-CRRCT curves. Tangents are on 5” roller centers with #50 chain. Odd length tangents, priced as next whole foot. Price includes jackshaft. Optional roller centers are available and require jackshaft slave connection kit, contact factory for pricing. 12”minimum elevation required. 30º and 45º curves have 25”long tangent on drive end. 25-CRRCT Tangents with 5”Roller Centers Conveying Surface 15 3/4" to 21 3/4" 23 3/4" to 33 3/4" 35 3/4" to 47 3/4"

"HSNC" SUPPORT Adjustment to Top of Roller 10 1/2" to 12"

Price Each 45.90 45.90 45.90 45.90 45.90 45.90 72.50 72.50 72.50 72.50 72.50 72.50

• ELECTRICAL CONTROLS- See Electrical Controls.

• GALVANIZING- Contact Factory

12" to 15" 15" to 18" 18" to 21" 21" to 24" 24" to 30" 30" to 36" 36" to 48" 48" to 60" 60" to 72" 72" to 84" 84" to 96"

* Knee price) Extra Braces.............. Add per pair...................................46.20 **Less than 18 1/2”top of roller elevation– . Top or Bottom Side Mounted Drive Required. Braces (Included in support

• OPTIONAL ROLLERS Use the following Add-On prices for optional roller sizes and bearings.

51 3/4"

57 3/4"

63 3/4"

Between Rail Width Overall Frame Width

19" to 25"

27" to 37"

39" to 51"

55"

61"

67"

Regreasable Bearings with Grease Fittings Conveying Surface 15 3/4" to 51 3/4" Between Rail Width 19" to 55" Overall FrameWidth 22 1/4" to 58 1/4"

57 3/4" to 63 3/4"

22 1/4" to 28 1/4" 30 1/4" to 40 1/4" 42 1/4" to 54 1/4"

58 1/4" 741.40 1057.20 1371.20 1683.40

64 1/4" 741.40 1057.20 1371.20 1683.40

70 1/4" 761.10 1098.00 1429.90 1756.20

61" to 67"

10"

462.90 690.10 917.00 1144.30

489.60 743.20 997.00 1250.60

716.70 1000.50 1284.00 1570.00

64 1/4" to 70 1/4"

15", 20"

90° 60° 45° 30°

300.60 343.50 257.40 193.20

25", 30", 35"

40", 45"

With 013.1059 Heavy Duty Bearings Conveying Surface 15 3/4" Between Rail Width 19" Overall FrameWidth 22 1/4"

17 3/4"

19 3/4"

21 3/4"

23 3/4"

27 3/4"

29 3/4"

33 3/4"

35 3/4"

39 3/4"

43 3/4"

47 3/4"

51 3/4"

57 3/4"

63 3/4"

21"

23"

25"

27"

31"

33"

37"

39"

43"

47"

51"

55"

61"

67"

24 1/4"

26 1/4"

28 1/4"

30 1/4"

34 1/4"

36 1/4"

40 1/4"

42 1/4"

46 1/4"

50 1/4"

54 1/4"

58 1/4"

64 1/4"

70 1/4"

90° 3028.50 3028.50 3028.50 3028.50 3028.50 3028.50 3028.50 3028.50 3028.50 3028.50 3028.50 3028.50 3028.50 3028.50 3028.50 60° 2642.50 2645.20 2648.30 2651.50 2655.00 2660.60 2663.80 2670.10 2677.30 2682.90 2689.30 2695.40 2701.50 2711.00 2720.00 45°* 1777.30 1779.80 1783.20 1786.20 1789.70 1795.50 1798.50 1804.70 1811.00 1817.60 1823.90 1830.00 1836.40 1845.50 1854.80 30°* 1128.30 1131.00 1134.20 1137.30 1140.40 1146.30 1149.80 1155.70 1162.00 1168.60 1175.40 1181.00 1187.20 1196.70 1206.00 *Includes 25”Long Tangent, One End Only, with 2 1/2”Dia. x 7 Ga. with 013.1059 Heavy Duty Bearings

PRICELIST | 01022019

Made with FlippingBook Ebook Creator