10072020_PriceList_1.1

36-CRRH

Heavy Duty Chain Driven (Roller-to- Roller) with Hex Shaft

PRICES FOR COMPLETE CONVEYOR INCLUDE: • 3 1/2 ” Dia. x .300” Wall Rollers With 1 1/16 ” Hex Shaft Mounted in Structural Channel Frame • “C” Face Speed Reducer–Sealed Worm Gear • 2 HP–230/460V–3 Ph.–60 Hz. “C” Face Premium Energy Efficient Motor (Specify Exact Voltage) and VSC AC Variable Speed Controller with Soft Start Capability (not mounted or wired). • No. 60 Roller to Roller Chain • Side Mounted Center Drive

• Totally Enclosed Chain Guard • 3-30 FPM Variable Conveying Speed (Speeds Other Than 30 FPM, Contact Factory) • Less Supports

Conveyor shown with optional floor supports

Conveying Surface Between Rail Width Overall FrameWidth

19 3/4"

21 3/4"

23 3/4"

27 3/4"

29 3/4"

33 3/4"

35 3/4"

41 3/4"

47 3/4"

53 3/4"

55 3/4"

63 3/4"

23"

25"

27"

31"

33"

37"

39"

45"

51"

57"

59"

67"

26 27/32" 28 27/32" 30 27/32" 34 27/32" 36 27/32" 40 27/32" 42 27/32" 48 27/32" 54 27/32" 60 27/32" 62 27/32" 70 27/32"

6" Centers 5' Drive Length-O.A. 6" Centers Intermediate - Per Foot 12" Centers 5' Drive Length-O.A. 12" Centers Intermediate - Per Foot

6835

6870

6905

6976

7010

7081

7115

7221

7326

7431

7466

7606

461.40 468.00 474.60 487.80 494.60 507.80 514.40 534.40 554.20 574.40 580.80 607.60

6072

6092

6111

6149

6168

6206

6225

6283

6340

6398

6417

6494

316.00 319.40 322.80 330.00 333.40 340.40 343.80 354.20 364.80 375.20 378.80 392.80

IMPORTANT NOTES

• NON-STANDARD WIDTHS Contact factory for lead time.

• OTHER WIDTHS For “IN-BETWEEN WIDTHS”, use next width plus 10%. For widths over 70 27/32” OAW, contact factory for lead time.

• FLOOR SUPPORTS Floor Supports are not included in base price. There are two (2) stationary floor supports required for the first bed section and one (1) support required per bed section thereafter.

• INTERMEDIATE BEDS Use per foot price of width x required length, supports not included.

• OPTIONAL EQUIPMENT

• MOTORS 3 HP-208/230/460/575 V-3 Ph.-60 Hz. motor, controller, and reducer in place of standard Add-on..........................................................................990.70 • DRIVE COMPONENT DEDUCTS Less Complete Drive, but with Drive Shaft Extension and Sprocket................... Deduct.......................................2680.60 Less Motor and Controller Only................................................. ................................ Deduct.......................................1534.00 Less Controller Only.................................................................. ................................ Deduct.......................................1003.20 Mount andWire Controller....................................................... ................................ Add-on........................................246.10 NOTE : IF SUPPLIED LESS CONTROLLER, CUSTOMER TO SUPPLY SOFT START MECHANISM AND ASSUME RESPONSIBILITY FOR APPLICATION.

• FLOOR SUPPORTS Not Included in Base Price. Use Chart Below for Required Elevation. STRUCTURAL NON-ADJUSTABLE SUPPORTS Model No. Adjustment to Top of Roller Price Each

HSF-9 HSF-10 HSF-11 HSF-12 HSF-13 HSF-14 HSF-15 HSF-16 HSF-17 HSF-18 HSF-19 HSF-20 HSF-21 HSF-22 HSF-23 HSF-24 HSF-25 HSF-26 HSF-27 HSF-28 HSF-29 HSF-30

9 3/8" 10" 11" 12" 13" 14" 15" 16" 17" 18" 19" 20" 21" 22" 23" 24" 25" 26" 27" 28" 29" 30"

86.30 88.10 89.70 91.40 93.10 94.90 96.60 98.00 99.90

101.50 103.10 105.00 106.60 108.20 110.20 126.00 127.60 129.00 130.50 132.10 132.30 134.90

• GALVANIZING -Contact Factory

Knee Braces (Included in support price) Extra Braces.............. Add per pair...................................46.20

PRICELIST | 01022019