10072020_PriceList_1.1

DCEZ-62

Heavy Duty Accumulating Conveyor (Zero Pressure)

PRICES FOR COMPLETE CONVEYOR INCLUDE: • (2) Strands of #60 single pitch chains. • UHMW polyethylene chain guides. • 6”x 7 ga. powder painted formed steel frame. • Accumulation Zones with EZLogic® (Diffuse) Accumulation System NEMA 1, 2, IP 62. UL Approved. • 27 VDC 100Watt Power Supply for Zone Controllers (Requires 120VAC or 230 VAC Single Phase Input)

• 1 1/2 HP 208/230/460/575/3/60 Gearmotor. • 35 FPM constant speed. • 2060 BTB15H drive sprockets with 1 3/8”dia. shaft. • Filter Regulator • Less Motor Controls • Less Supports

U.S. Patent Numbers 5,862,907 • 7,243,781 • 7,591,366 Other Patents Pending.

NOTE : Pushbutton Programmer or Programming Kit for PC NOT INCLUDED in listed price. See EZLogic® Components pages for information and pricing.

2-Strand Design

FRAMEWIDTH 19 7/8"

22 7/8"

25 7/8"

28 7/8"

31 7/8"

34 7/8"

37 7/8"

40 7/8"

43 7/8"

46 7/8"

49 7/8"

STRAND CENTERS 48" BASE LENGTH 12'-0" 6451 6471 6490 6511 6531 6552 6572 6592 6613 6633 6653 Add for Each Accumulation Zone 2394.55 Per Foot 122 126 130 133 137 140 144 148 151 155 159 FOR ZONES 66”OR LONGER, USE 2655.80 AS PER ZONE PRICE. NOTE : Section lengths and OAL change with zone lengths. ZONE LENGTHS 36”to 60”in 6”INCREMENTS NOTE : Maximum product length is 6”less than zone length. Total specification of product is required; product is recommended for testing. 18" 21" 24" 27" 30" 33" 36" 39" 42" 45"

IMPORTANT NOTE

Operating DCEZ-62 in slug mode is not recommended.

Product footprint may affect drive capacity. NOTE : Drive Zone is minimum 60”long. • OPTIONAL EQUIPMENT

IMPORTANT NOTES

• HORSEPOWER For larger horsepower requirements, contact factory for lead time.

• OTHER LENGTHS For lengths longer than 12’-0”OAL, add per foot price of width for additional length + zone price x total number of zones required. OAL must be divisible by zone length. • OTHER WIDTHS For “IN-BETWEEN WIDTHS”, use next width plus 10%. For widths wider than 49 7/8”, contact factory for lead time. All non-standard widths contact factory for lead time.

• FLOOR SUPPORTS Floor supports are not included in base price. There are two (2) stationary floor supports required under the drive, and (2), for the first bed section and one (1) support per bed section thereafter.

• PNEUMATICALLY OPERATED ROLLER TRANSFER (2 STRAND DESIGN ONLY) (Tail & Intermediate)

• EZLOGIC® -See EZLogic® Component Page • ELECTRICAL CONTROLS -See Electrical Controls.

• END DRIVE In lieu of Center Drive .............................................No Add-On ................................................................................No Deduct • FLOOR SUPPORTS Not Included in Base Price. Adjustable from 13”to 45”from floor to top of chain. Drive Support Model No. Adjustment to Top of Chain Price Each DCDS-02 13" to 15" 134.90 DCDS-03 15" to 17" 138.40 DCDS-04 17" to 19" 141.80 DCDS-05 19" to 21" 145.60 DCDS-06 21" to 23" 149.10 DCDS-07 23" to 25" 154.30 DCDS-08 25" to 27" 159.70 DCDS-09 27" to 29" 164.90 DCDS-10 29" to 31" 170.30 DCDS-11 31" to 33" 175.50 DCDS-12 33" to 35" 180.90 DCDS-13 35" to 37" 185.90 DCDS-14 37" to 39" 189.90 DCDS-15 39" to 41" 195.20 DCDS-16 41" to 43" 200.50 DCDS-17 43" to 45" 205.70

Includes supports for 13”elevation 3 1/2”rollers mounted on 6”centers Strand Centers Price Each

Intermediate Support Adjustment to Top of Chain

Model No.

Price Each

DCS-01 DCS-02 DCS-03 DCS-04 DCS-05 DCS-06 DCS-07 DCS-08 DCS-09 DCS-10 DCS-11 DCS-12 DCS-13 DCS-14 DCS-15 DCS-16 DCS-17

12" to 13" 13" to 15" 15" to 17" 17" to 19" 19" to 21" 21" to 23" 23" to 25" 25" to 27" 27" to 29" 29" to 31" 31" to 33" 33" to 35" 35" to 37" 37" to 39" 39" to 41" 41" to 43" 43" to 45"

129.50 134.90 138.40 141.80 145.60 149.10 154.30 159.70 164.90 170.30 175.50 180.90 185.90 189.90 195.20 200.50 205.70

18" 21" 24" 27" 30" 33" 36" 39" 42" 45" 48"

9009.70 9229.80 9449.40 9667.60 9885.90 10105.00 10324.00 10543.10 10762.20 10982.10

11202.10 Conveyor to Conveyor Design and Extended Design.....Contact Application Team

• GALVANIZING- Contact Factory

PRICELIST | 01022019