10072020_PriceList_1.1

DCEZ-63

Heavy Duty Accumulating Conveyor (Zero Pressure)

PRICES FOR COMPLETE CONVEYOR INCLUDE:

• (3) Strands of #60 single pitch chains. • UHMW polyethylene chain guides. • 6” x 7 ga. powder painted formed steel frame. • Accumulation Zones with EZLogic® (Diffuse) Accumulation System NEMA 1, 2, IP62. UL Approved. • 27 VDC 100 Watt Power Supply for Zone Controllers (Requires 120VAC or 230 VAC Single Phase Input)

• 1 1/2 HP 208/230/460/575/3/60 Gearmotor. • 35 FPM constant speed. • 2060 BTB15H drive sprockets with 1 3/8 ” dia. shaft. • Filter Regulator • Less Motor Controls • Less Supports

U.S. Patent Numbers 5,862,907 • 7,243,781 • 7,591,366 Other Patents Pending.

NOTE : Pushbutton Programmer or Programming Kit for PC NOT INCLUDED in listed price. See EZLogic® Components pages for information and pricing.

3-Strand Design

FRAMEWIDTH STRAND CENTERS BASE LENGTH 12'-0" Add for Each Accumulation Zone

37 7/8" 43 7/8" 49 7/8" 55 7/8" 61 7/8" 67 7/8" 73 7/8" 79 7/8" 85 7/8" 91 7/8" 97 7/8

18"

21"

24"

27"

30"

33"

36"

39"

42"

45"

48"

7869 7912 7955 7997 8040 8083 8124 8167 8210 8252 8295

2782.00

Per Foot

244

250

257

263

269

275

282

289

295

301

307

FOR ZONES 66”OR LONGER, USE 2994.60 AS PER ZONE PRICE. NOTE : Section lengths and OAL change with zone lengths. ZONE LENGTHS 36”to 60”in 6”INCREMENTS NOTE : Maximum product length is 6”less than zone length. Total specification of product is required; product is recommended for testing. Product footprint may affect drive capacity.

IMPORTANT NOTE

Operating DCEZ-63 in slug mode is not recommended.

• OPTIONAL EQUIPMENT IMPORTANT NOTES NOTE : Drive Zone is minimum 60”long.

• OTHER LENGTHS For lengths longer than 12’-0”OAL, add per foot price of width for additional length + zone price x total number of zones required. OAL must be divisible by zone length. • OTHER WIDTHS For “IN-BETWEEN WIDTHS”, use next width plus 10%. For widths wider than 97 7/8”, contact factory for lead time. All non-standard widths contact factory for lead time.

• HORSEPOWER For larger horsepower requirements, contact factory for lead time.

• FLOOR SUPPORTS Floor supports are not included in base price. There are two (2) stationary floor supports required under the drive, and (2),for the first bed section and one (1) support per bed section thereafter.

• EZLOGIC®- See EZLogic® Component Page

• PNEUMATICALLY OPERATED ROLLER TRANSFER (3 STRAND DESIGN ONLY) (Tail & Intermediate)

• END DRIVE In lieu of Center Drive .............................................No Add-On ................................................................................No Deduct • FLOOR SUPPORTS Not Included in Base Price. Adjustable from 13”to 37”from floor to top of chain.

• ELECTRICAL CONTROLS- See Electrical Controls.

Includes supports for 13”elevation 3 1/2”rollers mounted on 6”centers Strand Centers Price Each

Intermediate Support Adjustment to Top of Chain

Model No.

Price Each

DC3S-01 DC3S-02 DC3S-03 DC3S-04 DC3S-05 DC3S-06 DC3S-07 DC3S-08 DC3S-09 DC3S-10 DC3S-11 DC3S-12 DC3S-13 DC3S-14 DC3S-15 DC3S-16 DC3S-17

12" to 13" 13" to 15" 15" to 17" 17" to 19" 19" to 21" 21" to 23" 23" to 25" 25" to 27" 27" to 29" 29" to 31" 31" to 33" 33" to 35" 35" to 37" 37”to 39” 39”to 41” 41”to 43” 43”to 45”

193.60 199.50 207.80 212.90 218.40 223.50 231.70 239.20 247.30 255.50 262.60 271.50 279.30 287.10 295.30 303.20 311.10

18" 21" 24" 27" 30" 33" 36" 39" 42" 45" 48"

10648.30 11033.60 11417.40 11799.60 12197.70 12399.90 12947.70 13330.10 13713.60 14097.60

Drive Support Adjustment to Top of Chain

Model No.

Price Each

DCDS-02 DCDS-03 DCDS-04 DCDS-05 DCDS-06 DCDS-07 DCDS-08 DCDS-09 DCDS-10 DCDS-11 DCDS-12 DCDS-13 DCDS-14 DCDS-15 DCDS-16 DCDS-17

13" to 15" 15" to 17" 17" to 19" 19" to 21" 21" to 23" 23" to 25" 25" to 27" 27" to 29" 29" to 31" 31" to 33" 33" to 35" 35" to 37" 37”to 39” 39”to 41” 41”to 43” 43”to 45”

134.90 138.40 141.80 145.60 149.10 154.30 159.70 164.90 170.30 175.50 180.90 185.90 189.90 195.20 200.50 205.70

14481.30 Conveyor to Conveyor Design and Extended Design.....Contact Application Team

• GALVANIZING -Contact Factory

PRICELIST | 01022019

Made with FlippingBook Ebook Creator